Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)

This document gives the safety requirements and measures for table band saws and band resaws, with manual loading and/or unloading and suitable for continuous production use, hereinafter referred to as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a) device to tilt the table;
b) device to tilt the saw unit.
This document does not apply to:
1)    machines driven by combustion engines or power take offs (PTO);
2)    log band sawing machines;
NOTE Log band sawing machines are covered by EN 1807-2:2013.
3)    horizontal band saws and band resaws;
4)    machines designed for cross-cutting of firewood.
This document does not deal with hazards related to the combination of a single machine being used with any other machine (as part of a line).
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

Holzbearbeitungsmaschinen - Sicherheit - Teil 16: Tischbandsägemaschinen und Trennbandsägemaschinen (ISO 19085-16:2021)

Dieses Dokument stellt Sicherheitsanforderungen und Maßnahmen zur Verfügung für Tischbandsägemaschinen und Trennbandsägemaschinen mit Handbeschickung und/oder Handentnahme, die für den dauerhaften Einsatz in der Produktion geeignet sind, im Folgenden „Maschinen“ genannt.
Die Maschinen sind für die Verarbeitung von Massivholz und Werkstoffen mit ähnlichen physikalischen Eigenschaften wie Holz konstruiert.
Es behandelt alle im Anhang A aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf diese Maschinen zutreffen, wenn sie bestimmungsgemäß und entsprechend den vom Hersteller vorgesehenen Bedingungen verwendet, eingestellt und gewartet werden; vernünftigerweise vorhersehbare Fehlanwendung wurde ebenfalls berücksichtigt. Ferner werden die Phasen Transport, Montage, Demontage, Rückbau und Verschrottung berücksichtigt.
Es ist auch für Maschinen anwendbar, die mit einer oder mehreren der folgenden Einrichtungen/zusätzlichen Arbeitsaggregaten, deren Gefährdungen behandelt sind, ausgestattet sind:
a)   Einrichtung zum Schrägstellen des Tischs;
b)   Einrichtung zum Schrägstellen des Sägeaggregats.
Dieses Dokument ist nicht anwendbar für:
1)   Maschinen, die von Verbrennungsmotoren oder Zapfwellen (en: power take-off, PTO) angetrieben werden;
2)   Blockbandsägemaschinen;
ANMERKUNG   Blockbandsägemaschinen sind in EN 1807-2:2013 behandelt.
3)   horizontale Bandsägemaschinen und Trennbandsägemaschinen;
4)   Maschinen zum Querschneiden von Brennholz.
Dieses Dokument behandelt nicht die Gefährdungen in Bezug auf das Verbinden einer einzelnen Maschine mit irgendeiner anderen Maschine (als Teil einer Linie).
Dieses Dokument ist nicht anwendbar für Maschinen, die zur bestimmungsgemäßen Verwendung in potentiell explosiven Atmosphären vorgesehen sind oder für Maschinen, die vor dem Datum seiner Veröffentlichung hergestellt wurden.

Machines à bois - Sécurité - Partie 16: Scies à ruban à table et scies à ruban à refendre (ISO 19085-16:2021)

Le présent document donne les exigences et les mesures de sécurité pour les scies à ruban à table et les scies à ruban à refendre à chargement et/ou déchargement manuel et adaptée à l'utilisation en production continue, ci-après désignées «machines».
Les machines sont conçues pour couper du bois massif et un matériau ayant des caractéristiques physiques similaires à celles du bois.
Il traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, énumérés à l’Annexe A, applicables aux machines lorsqu’elles sont utilisées, réglées et entretenues comme prévu et dans les conditions prévues par le fabricant; une mauvaise utilisation raisonnablement prévisible a également été prise en compte. Les phases de transport, d’assemblage, de démontage, de mise hors service et de mise au rebut ont également été prises en compte.
Il est également applicable aux machines équipées d’un ou plusieurs des dispositifs/unités de travail supplémentaires suivants, dont les phénomènes dangereux ont été traités:
a) dispositif d’inclinaison de la table;
b) dispositif d’inclinaison de l’unité de sciage.
Le présent document ne s’applique pas:
1)    aux machines entraînées par des moteurs à combustion ou des prises de force (PTO);
2)    aux machines à scier à ruban pour grumes;
NOTE          Les machines à scier à ruban pour grumes sont couvertes par l’EN 1807‑2:2013.
3)    aux scies à ruban et scies à ruban à refendre horizontales;
4)    aux machines conçues pour le tronçonnage de bûches;
Le présent document ne traite pas des phénomènes dangereux liés à la combinaison d’une machine simple utilisée avec toute autre machine (comme partie d’une ligne de production).
Le présent document n’est pas applicable aux machines prévues pour une utilisation en atmosphères explosibles, ni aux machines fabriquées avant sa date de publication.

Lesnoobdelovalni stroji - Varnost - 16. del: Namizne tračne žage in žage za rezanje desk (ISO 19085-16:2021)

Ta dokument določa varnostne zahteve in ukrepe za stacionarne ter premestljive namizne tračne žage in žage za rezanje desk z ročnim nalaganjem in/ali razlaganjem, ki so zasnovane za rezanje lesa in materialov, ki imajo podobne lastnosti kot les (v nadaljnjem besedilu »stroji«).
OPOMBA 1:   Za definicijo premestljivega stroja glej standard ISO 19085-1:2017, točka 3.5.
Obravnava vse večje nevarnosti, nevarne situacije in dogodke iz točke 4 v zvezi s stroji, kadar se ti uporabljajo, prilagajajo in vzdržujejo v skladu s svojim namenom ter pod pogoji, ki jih je predvidel proizvajalec, vključno z razumno predvideno nepravilno uporabo. Upoštevane so bile tudi faze transporta, sestavljanja, razstavljanja in razrezovanja stroja.
OPOMBA 2:   Za pomembne (ne pa tudi večje) nevarnosti, npr. ostre robove okvirja stroja, glej standard ISO 12100:2010.
Standard se uporablja tudi za stroje, ki so opremljeni z eno ali več naslednjimi napravami/dodatnimi delovnimi enotami, katerih nevarnosti so bile obravnavane:
a)   naprava za nagib mize;
b)   naprava za nagib rezalne enote.
Ta dokument se ne uporablja za:
1)   stroje z motorji z notranjim izgorevanjem ali s priključnimi gredmi (PTO);
2)   tračne žage;
OPOMBA 3:   Tračne žage so obravnavane v standardu EN 1807-2.
3)   stroje, zasnovane za prečno rezanje ovalnih obdelovancev ali obdelovancev nepravilnih oblik;
4)   premične/premestljive stroje z največjo dolžino tračnega rezila ≤ 2700 mm in največjim premerom pogonskega kolesa ≤ 350 mm;
OPOMBA 4:    Premični električni stroji so obravnavani v zahtevah standarda EN 61029-1:2009 skupaj s standardom EN 61029-2-5:2015.

General Information

Status
Published
Publication Date
16-Nov-2021
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Nov-2021
Completion Date
17-Nov-2021

Relations

Buy Standard

Standard
EN ISO 19085-16:2022
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19085-16:2018 - BARVE
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19085-16:2022
01-februar-2022
Nadomešča:
SIST EN 1807-1:2013
Lesnoobdelovalni stroji - Varnost - 16. del: Namizne tračne žage in žage za rezanje
desk (ISO 19085-16:2021)
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO
19085-16:2021)
Holzbearbeitungsmaschinen - Sicherheit - Teil 16: Tischbandsägemaschinen und
Trennbandsägemaschinen (ISO 19085-16:2021)
Machines à bois - Sécurité - Partie 16: Scies à table et scies à refendre (ISO 19085-
16:2021)
Ta slovenski standard je istoveten z: EN ISO 19085-16:2021
ICS:
13.110 Varnost strojev Safety of machinery
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN ISO 19085-16:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19085-16:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 19085-16:2022


EN ISO 19085-16
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 79.120.10; C Supersedes EN 1807-1:2013
English Version

Woodworking machines - Safety - Part 16: Table band
saws and band re-saws (ISO 19085-16:2021)
Machines à bois - Sécurité - Partie 16: Scies à ruban à Holzbearbeitungsmaschinen - Sicherheit - Teil 16:
table et scies à ruban à refendre (ISO 19085-16:2021) Tischbandsägemaschinen und
Trennbandsägemaschinen (ISO 19085-16:2021)
This European Standard was approved by CEN on 20 August 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-16:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19085-16:2022
EN ISO 19085-16:2021 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19085-16:2022
EN ISO 19085-16:2021 (E)
European foreword
This document (EN ISO 19085-16:2021) has been prepared by Technical Committee ISO/TC 39
"Machine tools" in collaboration with Technical Committee CEN/TC 142 “Woodworking machines -
Safety” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1807-1:2013.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
fo
...

SLOVENSKI STANDARD
oSIST prEN ISO 19085-16:2018
01-november-2018
/HVQRREGHORYDOQLVWURML9DUQRVWGHO1DPL]QHWUDþQHåDJHLQåDJH]DUH]DQMH
GHVN ,62',6
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO/DIS
19085-16:2018)
Holzbearbeitungsmaschinen - Sicherheit - Teil 16: Tischbandsägemaschinen und
Trennbandsägemaschinen (ISO/DIS 19085-16:2018)
Machines à bois - Sécurité - Partie 16: Scies à table et scies à refendre (ISO/DIS 19085-
16:2018)
Ta slovenski standard je istoveten z: prEN ISO 19085-16
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
oSIST prEN ISO 19085-16:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19085-16:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19085-16:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19085-16
ISO/TC 39/SC 4 Secretariat: UNI
Voting begins on: Voting terminates on:
2018-09-04 2018-11-27
Woodworking machines — Safety —
Part 16:
Table band saws and band re-saws
Machines à bois — Sécurité —
Partie 16: Scies à table et scies à refendre
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19085-16:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19085-16:2018
ISO/DIS 19085‐16:2018
ISO/DIS 19085-16:2018(E)

Contents
Foreword . vi
Introduction. vii
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 2
4  List of significant hazards . 6
5  Safety requirements and measures for controls . 8
5.1  Safety and reliability of control systems . 8
5.2  Control devices . 8
5.3  Start . 9
5.4  Safe stops . 9
5.4.1  General . 9
5.4.2  Normal stop . 9
5.4.3  Operational stop . 9
5.4.4  Emergency stop . 9
5.5  Braking function of tool spindles . 9
5.6  Mode selection .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.