Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable table band saws and band re-saws with manual loading and/or unloading, also when mounted to and powered by a motor tractor, hereinafter together referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood, and also these materials covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
Machines designed to cut wood based material may also be used to cut rigid plastic materials with similar characteristics as wood.
This European Standard does not apply to:
a)   Transportable machines, i.e. machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;
NOTE 1   Transportable electrically driven machines are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-5:2011.
b)   hand held motor-operated electric tools including any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 2   Hand-held motor-operated electric tools are covered by the requirements of EN 60745-1:2009 together with EN 60745-2-20:2009.
c)   log band saws.
NOTE 3   Log sawing machines are covered by EN 1807-2.
This European Standard does not deal with the specific hazards related to thermal engine and P.T.O. equipment that may be fitted to the machine.
This European Standard is not applicable to machines manufactured before the date of its publication as EN.
NOTE 4   Machines covered by this document are listed under 4 of Annex IV of the Machinery Directive.

Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und Trennbandsägemaschinen

Diese Europäische Norm behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Ereignisse, die auf stationäre und verschiebbare Tischbandsägemaschinen und Trennbandsägemaschinen mit Handbeschickung und/oder Handabnahme, auch wenn sie angebaut an und angetrieben durch einen Traktor sind, zutreffen - im Folgenden als "Maschinen" bezeichnet -, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten und/oder mit Kunststoff/Leichtmetall-Legierung beschichtet sind, wenn sie bestimmungsgemäß und entsprechend den durch den Hersteller vorher¬sehbaren Bedingungen einschließlich vernünftigerweise vorhersehbarer Fehlanwendung verwendet werden.
Maschinen, die zum Sägen von Holzaustauschstoffen konstruiert sind, können auch zum Sägen von Hartkunststoffen mit ähnlichen Eigenschaften wie Holz verwendet werden.
Diese Europäische Norm gilt nicht für:
a)   transportable Maschinen, d. h. Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von Hand von einer Person angehoben werden können; das Gestell kann auch ein fester Bestandteil der Maschine sein, wenn es aus scharnierbefestigten Füßen besteht, die heruntergeklappt werden können;
ANMERKUNG 1   Transportable, elektrisch angetriebene Maschinen sind durch die Anforderungen in EN 61029 1:2009 zusammen mit EN 61029-2-5:2011 erfasst.
b)   handgeführte motorbetriebene Elektrowerkzeuge einschließlich irgendwelcher Einrichtungen, die ihre Verwendung in einer anderen Weise, d. h. in einem Gestell montiert, ermöglichen;
ANMERKUNG 2   Handgeführte motorbetriebene Elektrowerkzeuge sind durch die Anforderungen in EN 60745 1:2009 zusammen mit EN 60745-2-20:2009 erfasst.
c)   Blockbandsägemaschinen.
ANMERKUNG 3   Blockbandsägemaschinen sind in FprEN 1807-2:2012 erfasst.
Diese Europäische Norm behandelt nicht die spezifischen Gefährdungen im Zusammenhang mit einer Wärmekraftmaschine und einem Zapfwellenantrieb (PTO), mit denen die Maschine ausgerüstet sein kann.
Diese Europäische Norm gilt nicht für Maschinen, die vor dem Datum seiner Veröffentlichung als EN hergestellt wurden.
ANMERKUNG 4   Die von diesem Dokument erfassten Maschinen sind in 4 des Anhangs IV der Maschinenrichtlinie aufgeführt.

Sécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1: Scies à table et scies à refendre

La présente Norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu’énumérés à l’Article 4, applicables aux scies à table et scies à refendre fixes ou transportables à chargement et/ou déchargement manuels, également lorsqu’elles sont montées sur et alimentées par un tracteur motorisé, ci-après désignées "machines", conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliages légers stratifiés, lorsqu’elles sont utilisées normalement et dans les conditions prévues par le fabricant, y compris une mauvaise utilisation raisonnablement prévisible.
Les machines conçues pour couper un matériau à base de bois peuvent également être utilisées pour couper les matières plastiques rigides avec des caractéristiques similaires à celles du bois.
La présente Norme européenne n'est pas applicable aux :
a)   machines transportables, c'est-à-dire aux machines installées sur un établi ou une table similaire à un établi, destinées à exécuter des travaux dans une position fixe et pouvant être soulevées à la main par une seule personne ; l'établi peut également être une pièce intégrée à la machine s'il consiste en pieds articulés qui peuvent être dépliés ;
NOTE 1   Les machines transportables à entraînement électrique sont couvertes par les prescriptions de l’EN 61029 1:2009 conjointement avec l’EN 61029-2-5:2011.
b)   outils électroportatifs à moteur, y compris toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixés sur un établi ;
NOTE 2   Les outils électroportatifs à moteur sont couverts par les prescriptions de l'EN 60745-1:2009 conjointement avec l’EN 60745-2-20:2009.
c)   scies à ruban à grumes.
NOTE 3   Les scies à ruban à grumes sont couvertes par le FprEN 1807-2:2012.
La présente Norme Européenne ne traite pas des phénomènes dangereux spécifiques relatifs à un moteur thermique et à un équipement de PTO qui peuvent être montés sur la machine.
La présente Norme européenne n’est pas applicable aux machines qui ont été fabriquées avant sa date de publication comme EN.
NOTE 4   Les machines couvertes par le présent document sont énumérées dans la Directive "Machines", Annexe IV, 4.

Varnost lesnoobdelovalnih strojev - Tračne žage - 1. del: Namizne tračne žage in žage za rezanje desk

Ta evropski standard obravnava vsa večja tveganja, nevarne razmere in dogodke iz točke 4, ki se nanašajo na stacionarne in premostljive ročne namizne tračne žage in žage za rezanje desk, tudi ko so nameščene na lokomotor in se iz njega napajajo, v nadaljnjem besedilu »stroji«, ki so namenjene za rezanje polnega lesa, ivernih plošč, vlaknenih plošč, vezanih plošč in tudi teh materialov, če so prekriti s plastičnimi robovi in/ali laminatom iz plastike/lahkih zlitin, kadar se uporabljajo v skladu z namembnostjo in pod pogoji, ki jih predvidi proizvajalec, vključno z razumno predvideno nepravilno uporabo. Stroji, namenjeni rezanju materialov na osnovi lesa, se lahko uporabljajo tudi za rezanje trdih plastičnih materialov s podobnimi lastnostmi kot les. Ta evropski standard se ne uporablja za:
a) prenosne stroje, tj. stroje na delovni mizi ali mizi, podobni delovni mizi, ki so namenjeni delovanju v stacionarnem položaju in jih lahko ročno dvigne ena oseba; delovna miza je lahko tudi sestavni del stroja, če sestoji iz zgibnih nog, ki jih je mogoče podaljšati navzdol;
OPOMBA 1: Premični električni stroji so obravnavani v zahtevah standarda EN 61029-1:2009 skupaj s standardom EN 61029-2-5:2011.
b) ročne motorne električne stroje, vključno s kakršno koli prilagoditvijo, ki omogoča uporabo na drugačen način, tj. namestitev na delovno mizo;
OPOMBA 2: Premični motorni električni stroji so obravnavani v zahtevah standarda EN 60745-1:2009 skupaj s standardom EN 60745-2-20:2009.
c) žage samice venecijanke.
OPOMBA 3: Žage samice venecijanke so obravnavane v standardu FprEN 1807-2:2012.
V tem evropskem standardu niso obravnavane specifične nevarnosti v zvezi s toplotnim motorjem in opremo priključne gredi, ki se lahko namesti na stroj. Ta evropski standard ne velja za stroje, ki so bili izdelani, preden je bil objavljen kot standard EN.
OPOMBA 4: Stroji, obravnavani v tem dokumentu, so navedeni v točki 4 Priloge IV k direktivi o strojih.

General Information

Status
Withdrawn
Publication Date
26-Mar-2013
Withdrawal Date
16-Nov-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Nov-2021

Relations

Buy Standard

Standard
EN 1807-1:2013
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 1807-1:2012
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und TrennbandsägemaschinenSécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1 : Scies à table et scies à refendreSafety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1807-1:2013SIST EN 1807-1:2013en,fr,de01-junij-2013SIST EN 1807-1:2013SLOVENSKI
STANDARDSIST EN 1807:2000+A1:2009oSIST prEN 1807-1:20091DGRPHãþD



SIST EN 1807-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1807-1
March 2013 ICS 79.120.10 Supersedes EN 1807:1999+A1:2009English Version
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
Sécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1: Scies à table et scies à refendre
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und Trennbandsägemaschinen This European Standard was approved by CEN on 13 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1807-1:2013: ESIST EN 1807-1:2013



EN 1807-1:2013 (E) 2 Contents Page Foreword .4 Introduction .6 1 Scope .7 2 Normative references .7 3 Terms, definitions and terminology . 10 3.1 Terms and definitions . 10 3.2 Terminology . 12 4 List of significant hazards . 17 5 Safety requirements and/or measures . 20 5.1 General . 20 5.2 Controls . 21 5.2.1 Safety and reliability of control systems . 21 5.2.2 Position of controls . 22 5.2.3 Starting . 22 5.2.4 Normal stopping .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und TrennbandsägemaschinenSécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1 : Scies à table et scies à refendreSafety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:FprEN 1807-1kSIST FprEN 1807-1:2012en,fr,de01-november-2012kSIST FprEN 1807-1:2012SLOVENSKI
STANDARD



kSIST FprEN 1807-1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1807-1
July 2012 ICS 79.120.10 Will supersede EN 1807:1999+A1:2009English Version
Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
Sécurité des machines pour le travail du bois - Machines à scier à ruban - Partie 1 : Scies à table et scies à refendre
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen - Teil 1: Tischbandsägemaschinen und Trennbandsägemaschinen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 142.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1807-1:2012: EkSIST FprEN 1807-1:2012



FprEN 1807-1:2012 (E) 2 Contents Page Foreword .4Introduction .51 Scope .62 Normative references .63 Terms, definitions and terminology .93.1 Terms and definitions .93.2 Terminology . 114 List of significant hazards . 165 Safety requirements and/or measures . 195.1 General . 195.2 Controls . 205.2.1 Safety and reliability of control systems . 205.2.2 Position of controls .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.