iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 15257:2017

(Main)

Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme (ISO 15257:2017)

Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme (ISO 15257:2017)

ISO 15257:2017 defines five levels of competence (detailed in Clause 4) for persons working in the field of cathodic protection (CP), including survey, design, installation, testing, maintenance and advancing the science of cathodic protection. It specifies a framework for establishing these competence levels and their minimum requirements.
Competence levels apply to each of the following application sectors:
-      on-land metallic structures;
-      marine metallic structures;
-      reinforced concrete structures;
       inner surfaces of metallic structures containing an electrolyte.
These application sectors are detailed in Clause 5.
ISO 15257:2017 specifies the requirements to be used for establishing a certification scheme as defined in ISO/IEC 17024. It is not mandatory to apply all of the levels and/or application sectors. This certification scheme is detailed in Annexes A, B and C.

Kathodischer Korrosionsschutz - Qualifikationsgrade von mit kathodischem Korrosionsschutz befassten Personen - Grundlage für ein Zertifizierungsverfahren (ISO 15257:2017)

Protection cathodique - Niveaux de compétence des personnes en protection cathodique - Base pour un dispositif particulier de certification (ISO 15257:2017)

ISO 15257:2017 définit cinq niveaux de compétence (détaillés à l'Article 4) pour les personnes travaillant dans le domaine de la protection cathodique (PC), incluant l'étude préalable, la conception, l'installation, le contrôle, la maintenance, ainsi que les progrès scientifiques en protection cathodique. Il spécifie un cadre pour l'établissement de ces niveaux de compétence, ainsi que les exigences minimales correspondantes.
Les niveaux de compétence s'appliquent à chacun des secteurs d'application suivants:
-      les structures métalliques terrestres;
-      les structures métalliques en mer;
-      les structures en béton armé;
-      les surfaces intérieures des structures métalliques contenant un électrolyte.
Ces secteurs d'application sont décrits en détail à l'Article 5.
ISO 15257:2017 spécifie les exigences à utiliser pour établir un dispositif particulier de certification comme défini dans l'ISO/IEC 17024. Il n'est pas obligatoire d'appliquer tous les niveaux et/ou tous les secteurs d'application. Ce dispositif particulier de certification est décrit en détail dans les Annexes A, B et C.

Katodna zaščita - Stopnje usposobljenosti in certifikacija osebja za katodno zaščito - Osnova za shemo certificiranja (ISO 15257:2017)

Ta mednarodni standard določa pet stopenj usposobljenosti in certificiranja osebja, ki deluje na področju katodne zaščite, vključno s pregledom, projektiranjem, namestitvijo, preskušanjem in vzdrževanjem. Določa okvir za vzpostavitev teh stopenj usposobljenosti in certificiranja ter minimalne zahteve. Stopnje usposobljenosti in certificiranja se uporabljajo v vsakem od naslednjih sektorjev: – kovinske strukture na kopnem; – pomorske kovinske strukture; – strukture iz armiranega betona; – notranje površine iz kovinskih oklopnih struktur. Ta mednarodni standard določa zahteve, ki se uporabljajo za vzpostavljanje sheme certificiranja, kot določa standard ISO/IEC 17024. Ta shema certificiranja je podrobno opisana v dodatkih A, B in C. Informacije: Tehnični odbor CEN/TC 219 je razvil standard EN 15257:2006, ki ga sedaj sprejema tehnični odbor ISO/TC 156 z nekaterimi spremembami izvirnega dokumenta EN. Tehnični odbor ISO/TC 156 je registriral delovni element ISO kot delovni element ISO v skladu z dunajskim sporazumom, vendar ga tehnični odbor CEN/TC 219 ni odobril kot aktivni delovni element CEN/TC 219 v skladu z dunajskim sporazumom, kar je potrebno za vzporedno aktivno glasovanje tehničnega odbora CEN/TC 219. Tehnični odbor CEN/TC 219 je odobril NWIP kot delovni element ISO v skladu z dunajskim sporazumom.

General Information

Status
Published
Publication Date
13-Jun-2017
Withdrawal Date
30-Dec-2017
ICS
77.060 - Corrosion of metals
Technical Committee
CEN/TC 219 - Cathodic protection (provisional)
Drafting Committee
CEN/TC 219/WG 1 - Cathodic protection of buried and immersed metallic structures
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
14-Jun-2017
Completion Date
14-Jun-2017
Ref Project
SIST EN ISO 15257:2017 - Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme (ISO 15257:2017)

Relations

Replaces
EN 15257:2006 - Cathodic protection - Competence levels and certification of cathodic protection personnel
Effective Date
21-Jun-2017

Buy Standard

EN ISO 15257:2017EN ISO 15257:2017
PreviousNext
Standard
EN ISO 15257:2017
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15257:2017
01-september-2017
1DGRPHãþD
SIST EN 15257:2007
.DWRGQD]DãþLWD6WRSQMHXVSRVREOMHQRVWLLQFHUWLILNDFLMDRVHEMD]DNDWRGQR
]DãþLWR2VQRYD]DVKHPRFHUWLILFLUDQMD ,62
Cathodic protection - Competence levels of cathodic protection persons - Basis for
certification scheme (ISO 15257:2017)
Kathodischer Korrosionsschutz - Qualifikationsgrade von mit kathodischem
Korrosionsschutz befassten Personen - Grundlage für ein Zertifizierungsverfahren (ISO
15257:2017)
Protection cathodique - Niveaux de compétence des personnes en protection cathodique
- Base pour un dispositif particulier de certification (ISO 15257:2017)
Ta slovenski standard je istoveten z: EN ISO 15257:2017
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.220.40 Kovinske prevleke Metallic coatings
SIST EN ISO 15257:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15257:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 15257:2017


EN ISO 15257
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2017
EUROPÄISCHE NORM
ICS 77.060 Supersedes EN 15257:2006
English Version

Cathodic protection - Competence levels of cathodic
protection persons - Basis for certification scheme (ISO
15257:2017)
Protection cathodique - Niveaux de compétence des Kathodischer Korrosionsschutz - Qualifikationsgrade
personnes en protection cathodique - Base pour un von mit kathodischem Korrosionsschutz befassten
dispositif particulier de certification (ISO 15257:2017) Personen - Grundlage für ein Zertifizierungsverfahren
(ISO 15257:2017)
This European Standard was approved by CEN on 15 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15257:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15257:2017
EN ISO 15257:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15257:2017
EN ISO 15257:2017 (E)
European foreword
This document (EN ISO 15257:2017) has been prepared by Technical Committee ISO/TC 156
"Corrosion of metals and alloys" in collaboration with Technical Committee CEN/TC 219 “Cathodic
protection” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2017, and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15257:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15257:2017 has been approved by CEN as EN ISO 152
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 24656:2022(Main)
Cathodic protection of offshore wind structures (ISO 24656:2022)
SIST EN ISO 24656:2022

This document specifies the requirements for the external and internal cathodic protection for offshore wind farm structures. It is applicable for structures and appurtenances in contact with seawater or seabed environments. This document addresses:
—    design and implementation of cathodic protection systems for new steel structures;
—    assessment of residual life of existing cathodic protection systems;
—    design and implementation of retrofit cathodic protection systems for improvement of the protection level or for life extension of the protection;
—    inspection and performance monitoring of cathodic protection systems installed on existing structures, and
—    guidance on cathodic protection of reinforced concrete structures.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12696:2022(Main)
Cathodic protection of steel in concrete (ISO 12696:2022)
SIST EN ISO 12696:2022

This document specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including carbon steel reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement. It is not applicable to reinforced concrete containing electrically conductive fibres (e.g. carbon or steel).
This document applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buildings or structures.
This document is only applicable to the applications of cathodic protection to steel in concrete which are designed with the intention to, and can be demonstrated to, meet the criteria of protection specified in 8.6. This requires the provision of sufficient performance monitoring systems as specified in 6.3 to all parts of the structure intended to be protected, in order to assess the extent to which the criteria in 8.6 are met.
This document does not apply to galvanic anodes or systems applied into patch repairs to reduce the effects of ‘incipient anodes’. This document does also not apply to any form of cathodic protection systems or other electrochemical treatments that either cannot meet the requirements of 8.6 or are not provided with the performance monitoring systems (see 6.3) that are necessary to assess whether the criteria of protection specified in 8.6 are met.
NOTE 1    Annex A gives guidance on the principles of cathodic protection and its application to steel in concrete.
NOTE 2    This document, while not specifically intended to address cathodic protection of steel in any electrolyte except concrete, can be applied to cathodic protection of steel in other cementitious materials such as are found, for example, in early 20th century steel-framed masonry, brick and terracotta clad buildings. In such applications, additional considerations specific to these structures are required in respect of design, materials and installation of cathodic protection; however, the requirements of this document can be applied to these systems.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15112:2022(Main)
External cathodic protection of well casings
SIST EN 15112:2022

This document provides information on methods suitable for assessing the likelihood of leakage due to external corrosion of well casings and to evaluate the need for cathodic protection, as well as methods of providing cathodic protection to the external part of these wells in contact with the soil. It also defines requirements for monitoring of performance of CP systems.
Onshore and offshore wells are included in the scope. However, for offshore wells where protection is provided by anodes on the wellhead structure, it is recognized that it might not be practical to achieve full protection of well casings.
This document applies to any gas, oil or water well with metallic casing, whether cemented or not.
However, in special conditions (shallow casings: e.g. 50 m, and homogeneous soil), EN 12954 can be used to achieve the cathodic protection and assess its efficiency.
The general requirements of EN 12954 apply; this document details additional, specific, requirements for CP of well casings.
This document applies to production and injection wells. References later in this document to production also apply to injection.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18086:2020(Main)
Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2019)
SIST EN ISO 18086:2021

This document specifies protection criteria for determining the AC corrosion risk of cathodically protected pipelines.
It is applicable to buried cathodically protected pipelines that are influenced by AC traction systems and/or AC power lines.
In the presence of AC interference, the protection criteria given in ISO 15589-1 are not sufficient to demonstrate that the steel is being protected against corrosion.
This document provides limits, measurement procedures, mitigation measures, and information to deal with long-term AC interference for AC voltages at frequencies between 16,7 Hz and 60 Hz and the evaluation of AC corrosion likelihood.
This document deals with the possibility of AC corrosion of metallic pipelines due to AC interferences caused by conductive, inductive or capacitive coupling with AC power systems and the maximum tolerable limits of these interference effects. It takes into account the fact that this is a long-term effect, which occurs during normal operating conditions of the AC power system.
This document does not cover the safety issues associated with AC voltages on pipelines. These are covered in national standards and regulations (see, e.g., EN 50443).

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17243:2020(Main)
Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater
SIST EN 17243:2020

This document specifies the requirements and recommendations for cathodic protection systems applied to the internal surfaces of metallic tanks, structures, equipment and piping containing natural or treated seawater or brackish waters to provide an efficient protection from corrosion.
Cathodic protection inside fresh water systems is excluded from this document. This is covered by EN 12499.
NOTE   EN 12499 covers internal cathodic protection for any kind of waters, including general aspects for seawater but excluding industrial cooling water systems. This document specifically details applications in seawater and brackish waters.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12954:2019(Main)
General principles of cathodic protection of buried or immersed onshore metallic structures
SIST EN 12954:2020

This document describes the general principles for the implementation and management of a system of cathodic protection against corrosive attacks on structures which are buried or in contact with soils, surface fresh waters or underground waters, with and without the interference of external electrical sources. It specifies the protection criteria to be achieved to demonstrate the cathodic protection effectiveness.
For structures that cannot be electrically isolated from neighbouring influencing structures, it may be impossible to use the criteria defined in the present document. In this case, EN 14505 will be applied (see 9.4 "Electrical continuity/discontinuity").
To assist in forming a decision whether or not to apply cathodic protection the corrosion likelihood can be evaluated using Annex A. Annex A summarizes the requirements of EN 12501-1 [2] and EN 12501-2 [3].
Cathodic protection of structures immersed in seawater is covered by EN 12473 and a series of standards more specific for various applications.
Cathodic protection for reinforced concrete structures is covered by EN ISO 12696.
This document is applicable in conjunction with:
-   EN ISO 15589-1 for application for buried or immersed cathodically pipelines,
-   EN 50162 to manage d.c. stray currents,
-   EN ISO 18086 to manage corrosion due to a.c. interference from high voltage power sources and a.c. traction systems,
-   EN 13509 for cathodic protection measurement techniques
-   EN 50443 to manage protection for touch and step voltage.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12473:2014(Main)
General principles of cathodic protection in seawater
SIST EN 12473:2014

This European Standard covers the general principles of cathodic protection when applied in seawater, brackish waters and marine mud. It is intended to be an introduction, to provide a link between the theoretical aspects and the practical applications, and to constitute a support to the other European Standards devoted to cathodic protection of steel structures in seawater.
This European Standard specifies the criteria required for cathodic protection. It provides recommendations and information on reference electrodes, design considerations and prevention of the secondary effects of cathodic protection.
The practical applications of cathodic protection in seawater are covered by the following standards:
-   EN 12495, Cathodic protection for fixed steel offshore structures;
-   EN ISO 13174, Cathodic protection of harbour installations (ISO 13174);
-   EN 12496, Galvanic anodes for cathodic protection in seawater and saline mud;
-   EN 13173, Cathodic protection for steel offshore floating structures;
-   EN 16222, Cathodic protection of ship hulls;
-   EN 12474, Cathodic protection of submarine pipelines;
-   ISO 15589 2, Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines.
For cathodic protection of steel reinforced concrete whether exposed to seawater or to the atmosphere, EN ISO 12696 applies.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12496:2013(Main)
Galvanic anodes for cathodic protection in seawater and saline mud
SIST EN 12496:2013

This European Standard specifies the minimum requirements and gives recommendations for the chemical composition, the electrochemical properties, the physical tolerances, and the test and inspection procedures for cast galvanic anodes of aluminium, magnesium and zinc based alloys for cathodic protection in sea water and saline mud.
This European Standard is applicable to the majority of galvanic anodes used for seawater and saline mud applications, i.e. cast anodes of trapezoidal, "D", or circular cross section and bracelet type anodes.
The general requirements and recommendations of this European Standard may also be applied to other anode shapes, e.g. half-spherical, button, etc., which are sometimes used for seawater applications.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16299:2013(Main)
Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
SIST EN 16299:2013

This European Standard defines the conditions necessary for an effective application of the cathodic protection method to mitigate corrosive attacks on the external surfaces of above ground storage steel tank bottoms in contact with soil, cushion or foundations.
This European Standard specifies the requirements for the design, implementation, commissioning, operation and maintenance of such a cathodic protection system.
This European Standard applies both for new and existing tanks.
NOTE 1   This European Standard is not applicable to reinforced concrete above ground storage tanks for which EN ISO 12696 applies.
NOTE 2   Detailed information concerning measurement techniques of cathodic protection given in EN 13509 are referred to in the present standard.
NOTE 3   Cathodic protection of internal surfaces of above ground storage steel tanks storing waters is addressed in EN 12499.
NOTE 4   Cathodic protection of external surfaces of buried tanks is addressed in EN 13636.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13174:2012(Main)
Cathodic protection of harbour installations (ISO 13174:2012)
SIST EN ISO 13174:2013

ISO 13174:2012 defines the means to be used to ensure that cathodic protection is efficiently applied to the immersed and driven/buried metallic external surfaces of steel port, harbour, coastal and flood defence installations and appurtenances in seawater and saline mud to provide protection from corrosion.
ISO 13174:2012 specifies cathodic protection of fixed and floating port and harbour structures. This includes piers, jetties, dolphins (mooring and berthing), sheet or tubular piling, pontoons, buoys, floating docks, lock and sluice gates. It also specifies cathodic protection of the submerged areas of appurtenances, such as chains attached to the structure, when these are not electrically isolated from the structure.
ISO 13174:2012 is to be used in respect of cathodic protection systems where the anodes are exposed to water or saline mud. For buried areas, typically in soil or sand filled areas behind piled walls or within filled caissons, which may be significantly affected by corrosion, specific cathodic protection design and operation requirements are defined in EN 12954, the anodes being exposed to soils.
ISO 13174:2012 does not cover the cathodic protection of fixed or floating offshore structures (including offshore loading buoys), submarine pipelines or ships.
ISO 13174:2012 does not include the internal protection of surfaces of any components such as ballast tanks, internals of floating structures flooded compartments of lock and sluice gates or the internals of tubular steel piles.
ISO 13174:2012 covers the cathodic protection of structures fabricated principally from bare or coated carbon and carbon manganese steels.
As some parts of the structure may be made of metallic materials other than carbon steels, the cathodic protection system should be designed to ensure that there is a complete control over any galvanic coupling and minimize risks due to hydrogen embrittlement or hydrogen-induced cracking (see ISO 12473 ).
ISO 13174:2012 does not address steel reinforced concrete structures (see EN 12696).
ISO 13174:2012 is applicable to the whole submerged zone in seawater, brackish waters and saline mud and related buried areas which can normally be found in port, harbour, coastal and flood defence installations wherever these structures are fixed or floating.
For surfaces which are alternately immersed and exposed to the atmosphere, the cathodic protection is only effective when the immersion time is long enough for the steel to become polarized. Typically, effective cathodic protection is achieved for all surfaces below mid tide.
For structures such as sheet steel and tubular steel piles that are driven into the sea bed or those that are partially buried or covered in mud, ISO 13174:2012 is also applicable to the surfaces buried, driven and exposed to mud which are intended to receive cathodic protection along with surfaces immersed in water.
Cathodic protection may also be applied to the rear faces of sheet steel piled walls and the internal surfaces of filled caissons. Cathodic protection of such surfaces is specified by EN 12954.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day