EN ISO 3452-3:1998

Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)

This European standard describes two types of reference blocks: - Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families; - Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant facilities and part-used containers. The reference blocks are used in the same conditions as the pieces to be tested according to EN 571-1.

Zerstörungsfreie Prüfung - Eindringprüfung - Teil 3: Kontrollkörper (ISO 3452-3:1998)

Diese Europäische Norm legt zwei Arten von Kontrollkörpern fest: a) Kontrollkörper 1 werden verwendet, um die Empfindlichkeitsstufen von fluoreßierenden und farbigen Eindringsystemen festzulegen; b) Kontrollkörper 2 werden verwendet, um die routinemäßige Beurteilung der floureßierenden und fabrigen Eindringmittel in Anlagen und teilgebrauchten Behältern durchzuführen. Die Kontrollkörper werden unter denselben Bedingungen wie die nach EN 571-1 geprüften Werkstücke verwendet.

Essais non destructifs - Examen par ressuage - Partie 3: Pièces de référence (ISO 3452-3:1998)

La présente norme décrit deux types de pièces de référence: - les pièces de référence de type 1 utilisées pour déterminer la sensibilité des pénétrants de contraste colorés et fluorescents; - les pièces de référence de type 2 utilisées pour l'évaluation périodique des performances des installations des pénétrants de contraste fluorescents et colorés et des récipients en partie utilisés. Les pièces de référence sont utilisées dans des conditions identiques à celles des pièces soumises à l'essai selon l'EN 571-1.

Neporušitveno preskušanje - Preskušanje s penetranti - 3. del: Primerjalni vzorci (ISO 3452-3:1998)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-1998
• Withdrawal Date: 19-Nov-2013
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 4 - Penetrant testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Nov-2013
• Completion Date: 20-Nov-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 3452-3:2000 - Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)

Relations

• Replaced By: EN ISO 3452-3:2013 - Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
• Effective Date: 27-Nov-2013
• Corrected By: EN ISO 3452-3:1998/AC:2001 - Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2000
Neporušitveno preskušanje - Preskušanje s penetranti - 3. del: Primerjalni vzorci
(ISO 3452-3:1998)
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-
3:1998)
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 3: Kontrollkörper (ISO 3452-3:1998)
Essais non destructifs - Examen par ressuage - Partie 3: Pieces de référence (ISO 3452-
3:1998)
Ta slovenski standard je istoveten z: EN ISO 3452-3:1998
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 3452-3
First edition
1998-12-15
Non-destructive testing — Penetrant
testing —
Part 3:
Reference test blocks
Essais non destructifs — Examen par ressuage —
Partie 3: Pièces de référence
A
Reference number
ISO 3452-3:1998(E)
ISO 3452-3:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in
the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
Attention is drawn to the possibility that some of the elements of this part of
ISO 3452 may be the subject of patent rights. ISO shall not be held
responsible for identifying any or all such patent rights.
International Standard ISO 3452-3 was prepared by the European
Committee for Standardization (CEN) in collaboration with ISO Technical
Committee TC 135, Non-destructive testing, Subcommittee SC 2, Surface
methods, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
Throughout the text of this standard, read “.this European Standard.” to
mean “.this International Standard.”.
This first edition together with ISO 3452-1, ISO 3452-2 and ISO 3452-4
cancels and replaces ISO 3452:1984, which has been technically revised.
ISO 3452 consists of the following parts, under the general title Non-
destructive testing — Penetrant testing:
— Part 1: General principles
— Part 2: Penetrant testing materials
— Part 3: Reference test blocks
— Part 4: Equipment
Annex ZA provides a list of corresponding International and European
Standards for which equivalents are not given in the text.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii
©
ISO ISO 3452-3:1998(E)
Contents
Page
Foreword iv
Introduction v
1 Scope 1
2 Normative references 1
3 Description of reference blocks 1
4 Type 1 reference block design and dimensions 1
5 Type 2 reference block design and dimensions 3
6 Identification 6
Annex ZA (normative) Normative references to international publications with their relevant
European publications 7
iii
©
ISO 3452-3:1998(E) ISO
Foreword
The text of EN ISO 3452-3:1998 has been prepared by Technical Committee CEN/TC 138 "Non-destructive testing",
the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 135 "Non-destructive
testing".
This European Standard shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by June 1999, and conflicting national standards shall be withdrawn at the latest by June
1999.
This European Standard has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association. This European Standard is considered to be a supporting standard to those
application and product standards which in themselves support an essential safety requirement of a New Approach
Directive and which make reference to this European Standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries
are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France,
Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland
and the United Kingdom.
iv
©
ISO ISO 3452-3:1998(E)
Introduction
At the present time, one part of this Standard is published independently on the European and ISO levels, the others
are under the Vienna Agreement and consequently have the ISO number at the European level. However, the Vienna
agreement was applied during the work, so some European Standards have referenced them under their previous
European number. The following table gives the correspondance between these different numbers.
Title previous number* official number
Non-destructive testing - Penetrant
testing
Part 1: General principles EN 571-1
Part 2: Testing of penetrant mate- prEN 571-2 prEN ISO 3452-2
rials
Part 3: Reference test blocks prEN 571-3 EN ISO 3452-3
Part 4: Equipment prEN 956 EN ISO 3452-4
*number under which this document is referenced in some European Standards
v
©
ISO ISO 3452-3:1998(E)
1 Scope
This European standard describes two types of reference blocks:
– Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast
penetrant product families;
– Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour
contrast penetr
...