EN ISO 3452-2:2006

Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006)

SO 3452-2:2006 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. It also details on-site control tests and methods.

Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung von Eindringprüfmitteln (ISO 3452-2:2006)

Dieses Dokument legt die technischen Anforderungen und die Prüfverfahren für die Musterprüfung und die Chargenprüfung von Eindringprüfmitteln fest. Es enthält auch Einzelheiten zu den vor Ort anzuwen¬denden Kontrollprüfungen und Verfahren.

Essais non destructifs - Examen par ressuage - Partie 2: Essais des produits de ressuage (ISO 3452-2:2006)

L'ISO 3452-2:2006 spécifie les exigences techniques et les modes opératoires d'essai applicables aux produits de ressuage dans le cadre des essais de type et de lot. Elle détaille également les essais et méthodes d'essai de contrôle sur site.

Neporušitveno preskušanje - Penetrantski preskusi - 2. del: Preskušanje penetrantskih snovi (ISO 3452-2:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2006
• Withdrawal Date: 19-Nov-2013
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 4 - Penetrant testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Nov-2013
• Completion Date: 20-Nov-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 3452-2:2007 - Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2006)

Relations

• Replaces: EN ISO 3452-2:2000 - Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 3452-2:2013 - Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
• Effective Date: 27-Nov-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3452-2:2007
01-januar-2007
1DGRPHãþD
SIST EN ISO 3452-2:2001
Neporušitveno preskušanje - Penetrantski preskusi - 2. del: Preskušanje
penetrantskih snovi (ISO 3452-2:2006)
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO
3452-2:2006)
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung von Eindringprüfmitteln (ISO
3452-2:2006)
Essais non destructifs - Examen par ressuage - Partie 2: Essais des produits de
ressuage (ISO 3452-2:2006)
Ta slovenski standard je istoveten z: EN ISO 3452-2:2006
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 3452-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 3452-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 19.100 Supersedes EN ISO 3452-2:2000
English Version
Non-destructive testing - Penetrant testing - Part 2: Testing of
penetrant materials (ISO 3452-2:2006)
Essais non destructifs - Examen par ressuage - Partie 2: Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung
Essais des produits de ressuage (ISO 3452-2:2006) von Eindringprüfmitteln (ISO 3452-2:2006)
This European Standard was approved by CEN on 7 August 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3452-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 3452-2:2006 (E)





Foreword


This document (EN ISO 3452-2:2006) has been prepared by Technical Committee CEN/TC 138
"Non-destructive testing", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 135 "Non-destructive testing".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by February 2007, and conflicting national
standards shall be withdrawn at the latest by February 2007.

This document supersedes EN ISO 3452-2:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 3452-2
Second edition
2006-08-15


Non-destructive testing — Penetrant
testing —
Part 2:
Testing of penetrant materials
Essais non destructifs — Examen par ressuage —
Partie 2: Essais des produits de ressuage





Reference number
ISO 3452-2:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 3452-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem rel
...