EN 1870-3:2001+A1:2009
(Main)Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates.
NOTE 1 For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches see 3.2, 3.3 and 3.4 and for the definition of displaceable machine see 3.8.
This document does not apply to:
- machines for cross cutting logs;
- hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 2 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2003 together with EN 60745-2-5:2003.
- !transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand.
NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002.
deleted text
For Computer Numerically Controlled (CNC) machines this !document" does not cover hazards related to Electro-Magnetic Compatibility (EMC).
This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as EN.
This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 3: Von oben schneidende Kappsägemaschinen und kombinierte Kapp- und Tischkreissägemaschinen
!Dieses Dokument behandelt die in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen
und Gefährdungsereignisse, die auf von oben schneidende Kappsägemaschinen und kombinierte
Kapp- und Tischkreissägemaschinen zutreffen — im Folgenden als „Maschinen“ bezeichnet — die konstruiert
sind zum Schneiden von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen,
wenn sie mit Kunststoffkanten versehen und/oder kunststoff-/aluminium-beschichtet sind."
!ANMERKUNG 1 Hinsichtlich den Definitionen für von oben schneidende Kappsägemaschinen und kombinierten
Kapp- und Tischkreissägemaschinen siehe 3.2, 3.3 und 3.4 und hinsichtlich der Definition für verschiebbare Maschinen
siehe 3.8."
!Dieses Dokument" gilt nicht für:
⎯ Maschinen zum Kappen von Rundholz;
⎯ !handgeführte motorbetriebene Elektrowerkzeuge oder irgendwelchen Einrichtungen, die ihre
Verwendung in einer anderen Weise z. B. in einer Stationäreinrichtung ermöglichen;"
!ANMERKUNG 2 Handgeführte motorbetriebene Elektrowerkzeuge und Sägetische, die eine Gesamtheit mit
einem handgeführten motorbetriebenen Elektrowerkzeug bilden, sind in EN 60745-1:2003 zusammen mit
EN 60745-2-5:2003 behandelt."
⎯ !transportable Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist,
aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die
von Hand von einer Person angehoben werden können."
!ANMERKUNG 3 Transportable motorbetriebene Elektrowerkzeuge sind durch die Anforderungen in
EN 61029-1:2000 zusammen mit EN 61029-2-1:2002 erfasst."
!gestrichener Text"
!Dieses Dokument" behandelt bei CNC-Maschinen nicht die Gefährdungen im Zusammenhang mit der
elektromagnetischen Verträglichkeit (EMV).
!Dieses Dokument ist nicht auf von oben schneidende Kappsägemaschinen und kombinierte Kapp- und
Tischkreissägemaschinen anwendbar, die vor seiner Veröffentlichung als EN hergestellt wurden."
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 3: Tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et à scies à table
Le présent document traite des phénomènes dangereux significatifs, des situations dangereuses et des événements dangereux énumérés dans l'Article 4 qui sont pertinents pour les tronçonneuses à coupe descendante et les tronçonneuses mixtes à coupe descendante et à scie à table, ci-après désignées «machines», conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contre-plaqué, ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliage léger stratifié.
NOTE 1 Pour la définition des tronçonneuses à coupe descendante et des tronçonneuses combinées à coupe descendante et à scie à table, voir 3.2, 3.3 et 3.4 et pour la définition de machine déplaçable, voir 3.8.
Ce document ne s'applique pas aux :
- machines conçues pour le tronçonnage de grumes ;
- outils électroportatifs à moteur ou toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixés sur un établi ;
NOTE 2 Les outils électroportatifs à moteur et les scies à table destinés à former un ensemble intégré avec des outils électroportatifs à moteur sont couverts par l'EN 60745-1:2003 et l'EN 60745-2-5:2003.
- machines déplaçables installées sur un établi ou une table similaire à un établi, destinées à exécuter des travaux dans une position fixe, pouvant être soulevées à la main par une personne.
NOTE 3 Les outils électriques déplaçables à moteur sont couverts par les exigences de l'EN 61029 1:2000 et de l'EN 61029-2-1:2002.
texte supprimé
Pour les machines à commande numérique !le présent document" ne traite pas des phénomènes dangereux liés à la Compatibilité électromagnétique (CEM).
Le présent document n’est pas applicable aux tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et à scie à table qui ont été fabriquées avant la date de publication en tant qu’EN.
La présente Norme européenne est applicable avant tout aux machines (...)
Varnost lesnoobdelovalnih strojev - Krožne žage - 3. del: Čelilne žage za rezanje od zgoraj navzdol in kombinirane čelilne in krožne žage z delovno mizo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 3: Von oben schneidende Kappsägemaschinen und kombinierte Kapp- und TischkreissägemaschinenSécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 3: Tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et scies à tableSafety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-3:2001+A1:2009SIST EN 1870-3:2002+A1:2009en01-maj-2009SIST EN 1870-3:2002+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1870-3:2001+A1
February 2009 ICS 79.120.10 Supersedes EN 1870-3:2001English Version
Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 3: Tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et scies à table
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 3: Von oben schneidende Kappsägemaschinen und kombinierte Kapp- und Tischkreissägemaschinen This European Standard was approved by CEN on 29 June 2001 and includes Amendment 1 approved by CEN on 27 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-3:2001+A1:2009: ESIST EN 1870-3:2002+A1:2009
Dimensional tolerances of saw spindles . 51Annex B (normative)
Riving knife mounting strength test . 52Annex C (normative)
Riving knife lateral stability test . 53Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC" . 55Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 56Bibliography . 57 SIST EN 1870-3:2002+A1:2009
consists of the following parts: Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Part 4: Multi-blade rip sawing machines with manual loading and/or unloading Part 5: Circular saw -benches/up-cutting cross-cut sawing machines Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) Part 12: Pendulum cross-cut sawing machines SIST EN 1870-3:2002+A1:2009
!EN ISO 12100-1:2003" for a description of type A, type B and type C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
0 Introduction This European Standard has been prepared to be a harmonised standard to provide one means of conforming to the essential safety requirements of the Machinery Directive, and associated EFTA regulations. This European Standard is a type “C” standard as defined in !EN ISO 12100-1:2003". The extent to which hazards are covered is indicated in the scope of this European Standard. The requirements of this European Standard concern designers, manufacturers, suppliers and importers of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches. This European Standard also includes information to be provided by the manufacturer to the user. Common requirements for tooling are given in !EN 847-1:2005". Electrically driven machines excluded by the scope of this European Standard are covered by the requirements of !EN 61029-1:2000", !EN 61029-2-9" and !EN 61029-2-11". 1 Scope !This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as „machines“, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates." !NOTE 1 For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches see 3.2, 3.3 and 3.4 and for the definition of displaceable machine see 3.8." This !document" does not apply to: machines for cross cutting logs; !hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;" !NOTE 2 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2003 together with EN 60745-2-5:2003." !transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand." !NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002." !deleted text" For Computer Numerically Controlled (CNC) machines this !document" does not cover hazards related to Electro-Magnetic Compatibility (EMC). !This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as EN." This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard. SIST EN 1870-3:2002+A1:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.