EN ISO 10545-10:1997
(Main)Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995)
Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995)
Contains a method for determining the moisture expansion of ceramic tiles by immersing a reheated tile into boiling water and measurement the proportional change in length.
Keramische Fliesen und Platten - Teil 10: Bestimmung der Feuchtigkeitsdehnung (ISO 10545-10:1995)
Carreaux et dalles céramiques - Partie 10: Détermination de la dilatation à l'humidité (ISO 10545-10:1995)
La présente partie de l'ISO 10545 prescrit une méthode pour la détermination de la dilatation à l'humidité des carreaux céramiques.
Keramične ploščice - 10. del: Ugotavljanje raztezka zaradi vlage
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10545-10:1998
01-april-1998
.HUDPLþQHSORãþLFHGHO 8JRWDYOMDQMHUD]WH]ND]DUDGLYODJH
Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995)
Keramische Fliesen und Platten - Teil 10: Bestimmung der Feuchtigkeitsdehnung (ISO
10545-10:1995)
Carreaux et dalles céramiques - Partie 10: Détermination de la dilatation a l'humidité
(ISO 10545-10:1995)
Ta slovenski standard je istoveten z: EN ISO 10545-10:1997
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-10:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10545-10:1998
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-10:1998
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-10:1998
---------------------- Page: 4 ----------------------
SIST EN ISO 10545-10:1998
---------------------- Page: 5 ----------------------
SIST EN ISO 10545-10:1998
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-10:1998
INTERNATIONAL ISO
4 0545-10
STANDARD
First edition
1995-1 l-l 5
Ceramic tiles -
Part 10:
Determination of moisture expansion
Carreaux et dalles cbramiques -
Partie IO: Dktermina tion de Ia dila tation 2 I ’humiditb
Reference number
ISO 10545-10: 1995(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-10:1998
ISO 10545010:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10545-10 was prepared by Technical Com-
mittee ISO/TC 189, Ceramic tile.
ISO 10545 consists of the following Parts, under the general title Ceramic
tiies:
- Part 1: Sampling and basis for acceptance
- Part 2: Determination of dimensions and sun ’ace quality
- Part 3: De fermination of water absorption, apparen t porosity, appar-
ent relative density and bulk density
- Part 4: Determination of modulus of rupture and breaking strength
- Part 5: Determination of impact resistance by measurement of co-
efficient of restitution
- Part 6: Determination of resistance to deep abrasion for unglazed
tiles
- Part 7: Determination of resistance to surface abrasion for glazed
tiles
- Part 8: Determination of linear thermal expansion
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-10:1998
0 ISO ISO 10545-10:1995(E)
- Part 9: Determination of resistance to thermal shock
- Part IO: Determination of moisture expansion
- Part ? 1: Determination of crazing resistance for glazed tiles
- Part 12: Determination of frost resistance
- Part 13: Determination of Chemical resistance
- Part 14: Determination of resistance to stains
- Part 75: Determination of lead and Cadmium given off by glazed tiles
- Part ? 6: Determination of small colour differentes
- Part ? 7: Determination of coefficien t of friction
Annex A of this part of ISO 10545 is for information only.
---------------------- Page: 9 ----------------------
SIST EN ISO 10545-10:1998
This page intentionally left blank
---------------------- Page: 10 ----------------------
SIST EN ISO 10545-10:1998
INTERNATIONAL STANDARD 0 ISO ISO 10545=10:1995(E)
Ceramic tiles -
Part 10:
Determination of moisture expansion
4.5 Boiling apparatus, for maintaining the test
1 Scope
specimens in boiling deionized or distilled water for
24 h.
This part of ISO 10545 specifies a method for deter-
mining the moisture expansion of ceramic tiles.
5 Test specimens
2 Definition
A Sample consists of five whole tiles. If the size of the
For the purposes of this part of ISO 10545, the fol-
measuring frame is such that whole tiles do not fit,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.