EN ISO 15551-1:2015

Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)

ISO 15551-1:2015 provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluations, handling, and storage of tubing-deployed electrical submersible pump (ESP) systems as defined herein. This part of ISO 15551 is applicable to those components meeting the definition of centrifugal pumps including gas handling devices, discharge heads, seal chamber sections, intake systems, mechanical gas separators, induction motors (herein motor), shaft couplings, motor lead extension, pothead, and power cables, as defined herein. Components supplied under the requirements of this part of ISO 15551 exclude previously used subcomponents. Additionally, this International Standard provides requirements for assembled ESP systems.
ISO 15551-1:2015 includes normative annexes addressing design validation performance rating requirements by component, requirements for determining ratings as an assembled system, functional evaluation: single component and cable reference information.
ISO 15551-1:2015 includes informative annexes addressing functional evaluation guidelines for assembled ESP systems, establishing recommended operating range (ROR) of the ESP system, example user/purchaser ESP functional specification form, considerations for the use of 3-phase low and medium voltage adjustable speed drives for ESP applications, analysis after ESP use, downhole monitoring of ESP assembly operation, and information on permanent magnet motors for ESP applications.
Equipment not covered by this part of ISO 15551 includes wireline and coiled tubing-deployed ESP systems, motor and pump shrouds, electric penetrators and feed-through systems, cable clamps and banding, centralizers, intake screens, passive gas separators, by-pass tools, check and bleeder valves, component adaptors, capillary lines, electric surface equipment, downhole permanent magnet motors, and non-conventionally configured ESP systems such as inverted systems. Repair and redress equipment requirements are not covered in this part of ISO 15551.
The terminologies used within this part of ISO 15551 are; "ESP assembly" for a system of products combined into an operational machine, "component" for individual products such as, pumps or seal chamber sections, and "subcomponent" for individual parts or subassemblies that are used in the construction of an individual component.

Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil 1: Elektrische Tauchpumpen zur Förderung (ISO 15551-1:2015)

Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 1: Systèmes électriques de pompes submersibles pour l'ascension artificielle (ISO 15551-1:2015)

Industrija za predelavo nafte in zemeljskega plina - Proizvodna oprema za vrtanje - 1. del: Električne potopne črpalke za prečrpavanje na površino (ISO 15551-1:2015)

General Information

• Status: Withdrawn
• Publication Date: 12-May-2015
• Withdrawal Date: 03-Oct-2023
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Ref Project: SIST EN ISO 15551-1:2015 - Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)

Relations

• Replaced By: EN ISO 15551:2023 - Petroleum and natural gas industries - Drilling and production equipment - Electric submersible pump systems for artificial lift (ISO 15551:2023)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2015
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3URL]YRGQDRSUHPD]DYUWDQMH
GHO(OHNWULþQHSRWRSQHþUSDONH]DSUHþUSDYDQMHQDSRYUãLQR,62
Petroleum and natural gas industries - Drilling and production equipment - Part 1:
Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil 1: Elektrische Tauchpumpen
zur Förderung (ISO 15551-1:2015)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
1: Systèmes électriques de pompes submersibles pour l'ascension artificielle (ISO 15551
-1:2015)
Ta slovenski standard je istoveten z: EN ISO 15551-1:2015
ICS:
23.080 ýUSDONH Pumps
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15551-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 75.180.10
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 1: Electric submersible pump systems for
artificial lift (ISO 15551-1:2015)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohrloch-Ausrüstungen - Teil
forage et de production - Partie 1: Systèmes électriques de 1: Elektrische Tauchpumpen zur Förderung (ISO 15551-
pompes submersibles pour l'ascension artificielle (ISO 1:2015)
15551-1:2015)
This European Standard was approved by CEN on 5 March 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15551-1:2015 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 15551-1:2015) has been prepared by Technical Committee ISO/TC 67 “Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn
at the latest by November 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15551-1:2015 has been approved by CEN as EN ISO 15551-1:2015 without any modification.

INTERNATIONAL ISO
STANDARD 15551-1
First edition
2015-05-01
Petroleum and natural gas industries —
Drilling and production equipment —
Part 1:
Electric submersible pump systems
for artificial lift
Industries du pétrole et du gaz naturel — Équipement de forage et
de production —
Partie 1: Systèmes électriques de pompes submersibles pour
l’ascension artificielle
Reference number
ISO 15551-1:2015(E)
©
ISO 2015
ISO 15551-1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 15551-1:2015(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms .13
5 Functional specification .16
5.1 General .16
5.2 Component type .16
5.3 Functional requirements .16
5.3.1 General.16
5.3.2 Application parameters .16
5.3.3 Environmental compatibility .18
5.3.4 Compatibility with related well equipment and services .19
5.4 User/purchaser selections .20
5.4.1 General.20
5.4.2 Design validation .20
5.4.3 Component functional evaluation .20
5.4.4 Quality grades.20
5.4.5 Shipping, handling, and storage .21
5.4.6 Additional documentation or requirements .21
6 Technical specification .21
6.1 General .21
6.2 Design criteria .22
6.2.1 General.22
6.2.2 Design documentation .22
6.2.3 Materials .22
6.2.4 Dimensional information .25
6.2.5 Component and assembled system design verification .26
6.2.6 Component design validation .26
6.2.7 Component functional evaluation requirements .26
6.2.8 Assembled system functional evaluation .26
6.2.9 Design changes .26
6.3 Technical specification — All components .26
6.3.1 Technical characteristics .26
6.3.2 Performance rating .27
6.4 Technical specification — Bolt-on discharge .27
6.4.1 General.27
6.4.2 Technical characteristics for the discharge .27
6.4.3 Performance ratings .27
6.4.4 Scaling of design validation .27
6.5 Technical specification — Pump and gas handler .27
6.5.1 General.27
6.5.2 Technical characteristics for the pump and gas handler .27
6.5.3 Performance ratings .28
6.5.4 Scaling of design validation .28
6.6 Technical specification — Bolt-on intake .
...