EN 15663:2017/prA1

Railway applications - Vehicle reference masses

This European Standard defines a set of reference masses for specifying the requirements for the design, testing, acceptance, marking, delivery and operation of rail vehicles.
The reference masses defined in this document are as follows:
-   dead mass;
-   design mass in working order;
-   design mass under normal payload;
-   design mass under exceptional payload;
-   operational mass in working order;
-   operational mass under normal payload.
These reference masses are defined with respect to the whole vehicle, but they can also apply to a specific system or component.
The specification of values for tolerances applicable to reference masses is not in the scope of this standard. Tolerances can be required by an application standard.
Additional loadings due to environmental factors, for example snow and retained or absorbed rainwater, are not in the scope of this European Standard.

Bahnanwendungen - Fahrzeugreferenzmassen

Applications ferroviaires - Masses de référence des véhicules

Železniške naprave - Določitev mase železniškega vozila - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 45.060.01 - Railway rolling stock in general
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/WG 2 - Structural requirements
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 12-Jul-2018
• Due Date: 26-Jan-2019
• Completion Date: 12-Jul-2018
• Ref Project: SIST EN 15663:2017/oprA1:2018 - Railway applications - Vehicle reference masses

Relations

• Merged Into: EN 15663:2017+A1:2018 - Railway applications - Vehicle reference masses
• Effective Date: 19-Jan-2023
• Amends: EN 15663:2017 - Railway applications - Vehicle reference masses
• Effective Date: 27-Dec-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15663:2017/oprA1:2018
01-julij-2018
äHOH]QLãNHQDSUDYH'RORþLWHYPDVHåHOH]QLãNHJDYR]LOD'RSROQLOR$
Railway applications - Vehicle reference masses
Bahnanwendungen - Fahrzeugreferenzmassen
Applications ferroviaires - Masses de référence des véhicules
Ta slovenski standard je istoveten z: EN 15663:2017/prA1
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15663:2017/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15663:2017/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 15663:2017/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 15663:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
May 2018
ICS 45.060.01
English Version

Railway applications - Vehicle reference masses
Applications ferroviaires - Masses de référence des Bahnanwendungen - Fahrzeugreferenzmassen
véhicules
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 15663:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15663:2017/prA1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 15663:2017/oprA1:2018
...