EN ISO 3262-1:1998

Extenders for paints - Specifications and methods of test - Part 1:Introduction and general test methods (ISO 3262-1:1997)

Migrated from Progress Sheet (TC Comment) (2000-07-10): VA decided by BT C 177/1995, but not added to VA register (too late in ISO)

Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 1: Einleitung und allgemeine Prüfverfahren (ISO 3262-1:1997)

Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 1: Introduction et méthodes d'essai générales (ISO 3262-1:1997)

Donne la terminologie générale utilisée dans les domaines des piles et accumulateurs électriques, et couvre la technologie, la conception, la construction, les performances et leurs applications. Elle a le statut d'une norme horizontale conformément au Guide 108 de la CEI.

Polnila za barve - Specifikacije in metode preskušanja - 1. del: Uvod in splošne preskusne metode (ISO 3262-1:1997)

General Information

• Status: Withdrawn
• Publication Date: 16-Jun-1998
• Withdrawal Date: 31-Mar-2020
• ICS: 87.060.10 - Pigments and extenders
• Technical Committee: CEN/TC 298 - Pigments and extenders
• Drafting Committee: CEN/TC 298 - Pigments and extenders
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Apr-2020
• Ref Project: SIST EN ISO 3262-1:1998 - Extenders for paints - Specifications and methods of test - Part 1:Introduction and general test methods (ISO 3262-1:1997)

Relations

• Replaced By: EN ISO 3262-1:2020 - Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020)
• Effective Date: 08-Apr-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polnila za barve - Specifikacije in metode preskušanja - 1. del: Uvod in splošne preskusne metode (ISO 3262-1:1997)Füllstoffe für Beschichtungsstoffe - Anforderungen und Prüfverfahren - Teil 1: Einleitung und allgemeine Prüfverfahren (ISO 3262-1:1997)Matieres de charge pour peintures - Spécifications et méthodes d'essai - Partie 1: Introduction et méthodes d'essai générales (ISO 3262-1:1997)Extenders for paints - Specifications and methods of test - Part 1:Introduction and general test methods (ISO 3262-1:1997)87.060.10Pigmenti in polnilaPigments and extendersICS:Ta slovenski standard je istoveten z:EN ISO 3262-1:1998SIST EN ISO 3262-1:1998en01-oktober-1998SIST EN ISO 3262-1:1998SLOVENSKI
STANDARDSIST ISO 3262-1:19981DGRPHãþD



SIST EN ISO 3262-1:1998



SIST EN ISO 3262-1:1998



SIST EN ISO 3262-1:1998



SIST EN ISO 3262-1:1998



SIST EN ISO 3262-1:1998



INTERNATIONAL STANDARD IS0 3262-l First edition 1997-06-I 5 Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods Mat&es de charge pour peintures - Spkcifications et mbthodes d’essai - Parfie 7: Introduction et mkthodes d’essai g6rGrales Reference number IS0 3262-I :1997(E) SIST EN ISO 3262-1:1998



IS0 32624:1997(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 3262-1 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 2, Pigments and extenders. Together with the subsequent parts, this International Standard cancels and replaces IS0 3262: 1975 which has been technically revised and divided into parts. Part 1 comprises the definition for the term extender and a number of test methods that are applicable to most extenders, whilst part 2 and the following parts specify requirements and, where appropriate, particular test methods for individual extenders. At present, the following parts of IS0 3262 are in preparation, under the general title Extenders for paints - Specifications and methods of test - Part 7: Introduction and general test methods - Part 2: Baryte (natural barium sulfate) 0 IS0 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland Internet [e-mail] x.400 c=ch; a=400net; p=iso; o=isocs; s=centraI Printed in Switzerland ii SIST EN ISO 3262-1:1998



@ IS0 - Part 3: Blanc fixe IS0 3262=1:1997(E) - Part 4: Whiting - Part 5: Natural crystalline calcium carbonate - Part 6: Precipitated calcium carbonate - Part 7: Dolomite - Part 8: Natural clay - Part 9: Calcined clay - Part 70: Natural talc/chlorite in lamellar form - Part 7 7: Natural talc, in lamellar form, containing carbonates - Part 72: Muscovite-type mica - Part 73: Natural quartz (ground) - Part 74: Cristobalite - Part 75: Vitreous silica - Part 76: Aluminium hydroxides - Part 7 7: Precipitated calcium silicate - Part 78: Precipitated sodium aluminium silicate - Part 79: Precipitated silica - Part 20: Fumed silica - Part 2 7: Silica sand (unground natural quartz) - Part 22: Diatomaceous earth (kieselguhr) SIST EN ISO 3262-1:1998



This page intentionally left blank SIST EN ISO 3262-1:1998



INTERNATIONAL STANDARD 0 IS0 IS0 3262=1:1997(E) Extenders for paints - Specifications and methods of test - Part 1: introduction and general test methods 1 Scope This part of IS0 3262 gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of IS0 3262. The subsequent parts of IS0 3262 specify requirements and the corresponding methods of test for extenders for use in paints and related coating materials. These parts may also be suitable for the various materials covered by the standard when they are used for other applications. 2 Normative references The following standards contain provisions which, through reference
...