Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2007)

ISO 5999:2007 specifies requirements for flexible load-bearing polyurethane foam of the polyether type.
It is applicable to flexible polyurethane cellular materials manufactured in block, sheet and strip form, in moulded and fabricated shapes, and as reconstituted material, used for load-bearing applications in general, but excluding carpet backing and underlay. It thus primarily relates to the quality of polyurethane foam used for comfort cushioning purposes.
The foam is classified according to performance during a fatigue test, indentation hardness index being used as a secondary means of grading the material.
The standard is not applicable to polyurethane foams foamed in place or to foams for use in heat-welded systems unless for load-bearing purposes.
Recommended applications for the range of flexible polyurethane foams covered by the standard are listed in an annex.

Weich-elastische Polymerschaumstoffe - Polyurethanschaumstoffe für Polsterzwecke mit Ausnahme von Teppichunterlagen - Anforderungen (ISO 5999:2007)

Diese Internationale Norm legt Anforderungen an weich-elastische, tragende Polyurethanschaumstoffe vom Polyethertyp fest.
Sie gilt für weich-elastische Polyurethanschaumstoffe, die als Schaumblock, in Platten- und Streifenform, als Formkörper und angefertigte Schaumstoffteile sowie als rekonstituiertes Material für allgemein tragende Anwendungen, mit Ausnahme von Teppichrückseiten und -unterlagen hergestellt werden. Die Norm bezieht sich folglich in erster Linie auf die Qualität von Polyurethanschaumstoffen zur Anwendung für Polsterzwecke.
Der Schaumstoff wird entsprechend dem Verhalten während einer Ermüdungsprüfung klassifiziert, wobei die Eindrückhärte als eine zweite Möglichkeit zur Einstufung des Materials dient.
Diese Internationale Norm gilt weder für Hinterschäumungen noch für Schaumstoffe zur Verwendung in heißgeschweißten Systemen, außer für tragende Anwendungen.
Empfohlene Anwendungen für den Bereich weich-elastischer Polyurethanschaumstoffe entsprechend dieser Internationalen Norm sind in Anhang A aufgeführt.

Matériaux polymères alvéolaires souples - Mousse de polyuréthanne pour utilisations soumises à des charges, à l'exclusion des revers de tapis - Spécifications (ISO 5999:2007)

L'ISO 5999:2007 spécifie les exigences relatives à la mousse flexible de polyuréthanne, du type polyéther, lorsqu'elle est soumise à des charges.
Elle s'applique aux matériaux alvéolaires souples en polyuréthanne fabriqués en blocs, en feuilles ou en bandes, en formes moulées ou fabriquées et comme matériau de récupération, employés d'une façon générale à des utilisations soumises à des charges, mais à l'exclusion des dos et revers de tapis. Elle se rapporte donc en premier lieu à la qualité de la mousse flexible de polyuréthanne utilisée à des fins de rembourrage visant le confort.
La classification de la mousse se base sur les performances lors d'un essai de fatigue, l'indice de dureté par indentation étant utilisé comme un moyen supplémentaire pour classer le matériau.
La présente norme ne couvre pas les mousses de polyuréthanne formées en place, ou les mousses à l'usage des systèmes soudés à chaud, sauf pour des utilisations soumises à des charges.
Les utilisations recommandées pour la série de mousses flexibles de polyuréthanne relevant de la présente norme sont indiquées dans une annexe.

Polimerni materiali, mehke pene - Poliuretanska pena za nosilne aplikacije, razen za podlogo preprog - Specifikacija (ISO 5999:2007)

General Information

Status
Withdrawn
Publication Date
31-Oct-2007
Withdrawal Date
03-Sep-2013
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
04-Sep-2013
Completion Date
04-Sep-2013

Relations

Buy Standard

Standard
EN ISO 5999:2008
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5999:2008
01-januar-2008
1DGRPHãþD
SIST EN ISO 5999:2004
Polimerni materiali, mehke pene - Poliuretanska pena za nosilne aplikacije, razen
za podlogo preprog - Specifikacija (ISO 5999:2007)
Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications
excluding carpet underlay - Specification (ISO 5999:2007)
Weich-elastische Polymerschaumstoffe - Polyurethanschaumstoffe für Polsterzwecke mit
Ausnahme von Teppichunterlagen - Anforderungen (ISO 5999:2007)
Matériaux polymeres alvéolaires souples - Mousse de polyuréthanne pour utilisations
soumises a des charges, a l'exclusion des revers de tapis - Spécifications (ISO
5999:2007)
Ta slovenski standard je istoveten z: EN ISO 5999:2007
ICS:
83.100 Penjeni polimeri Cellular materials
SIST EN ISO 5999:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 5999
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2007
ICS 83.100 Supersedes EN ISO 5999:2004
English Version
Flexible cellular polymeric materials - Polyurethane foam for
load-bearing applications excluding carpet underlay -
Specification (ISO 5999:2007)
Matériaux polymères alvéolaires souples - Mousse de Weich-elastische Polymerschaumstoffe -
polyuréthanne pour utilisations soumises à des charges, à Polyurethanschaumstoffe für Polsterzwecke mit Ausnahme
l'exclusion des revers de tapis - Spécifications (ISO von Teppichunterlagen - Anforderungen (ISO 5999:2007)
5999:2007)
This European Standard was approved by CEN on 12 October 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5999:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 5999:2007 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 5999:2007 (E)
Foreword
This document (EN ISO 5999:2007) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is
held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the
latest by May 2008.
This document supersedes EN ISO 5999:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 5999:2007 has been approved by CEN as a EN ISO 5999:2007 without any modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 5999
Second edition
2007-11-01

Flexible cellular polymeric materials —
Polyurethane foam for load-bearing
applications excluding carpet underlay —
Specification
Matériaux polymères alvéolaires souples — Mousse de polyuréthanne
pour utilisations soumises à des charges, à l'exclusion des revers de
tapis — Spécifications




Reference number
ISO 5999:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

ISO 5999:2007(E)
PDF disclaimer
This PDF file
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.