EN ISO 6433:1994
(Main)Technical drawings - Item references (ISO 6433:1981)
Technical drawings - Item references (ISO 6433:1981)
General rules for application and presentation are given. In the context of this standard the purpose of item references is restricted to the identification of component parts of assemblies and/or the identification of individual items detailed in the same drawing.
Technische Zeichnungen - Positionsnummern (ISO 6433:1981)
Diese Internationale Norm legt allgemeine Regeln für die Anwendung und Ausführung von Positionsnummern in technischen Zeichnungen fest. Im Rahmen dieser Norm ist die Anwendung von Positionsnummern beschränkt auf die Kennzeichnung von zusammengesetzten Teilen von Gruppen und/oder die Kennzeichnung von Einzelteilen, die in derselben Zeichnung dargestellt sind.
Dessins techniques - Repères des éléments (ISO 6433:1981)
La présente Norme internationale prescrit les règles générales d'utilisation et de représentation des repères des éléments sur les dessins techniques. Dans le contexte de la présente Norme internationale, l'objet de ces repères est limité à l'identification d'éléments composant des ensembles et (ou) à l'identification d'éléments individuels figurant en détail sur un même dessin.
Tehnične risbe - Pozicioniranje delov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Technische Zeichnungen - Positionsnummern (ISO 6433:1981)Dessins techniques - Reperes des éléments (ISO 6433:1981)Technical drawings - Item references (ISO 6433:1981)01.100.01Technical drawings in generalICS:Ta slovenski standard je istoveten z:EN ISO 6433:1994SIST EN ISO 6433:1998en01-maj-1998SIST EN ISO 6433:1998SLOVENSKI
STANDARD
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION~MEWYHAPO~HAR OW-AHM3AUMR I-IO CTAHAAPTM3AWlM~RGANISATION INTERNATIONALE DE NORMALISATION Technical drawings - Item references Dessins techniques - Repkes des &ments First edition - 1981-08-15 cii - UDC 744.4 Ref. No. ISO 6433-1981 (E) Descriptors : drawings, graphic methods, generalities. Price based on 2 pages SIST EN ISO 6433:1998
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO member bedies). The work of developing Inter- national Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 6433 was developed by Technical Committee ISO/TC 10, Technical drawings, and was circulated to the member bodies in June 1980. lt has been approved by the member bodies of the following countries : Australia Austria Belgium Brazil Canada China Czechoslovakia Denmark Egypt, Arab Rep. of Finland France Germany, F. R. India Ireland Italy Japan Korea, Rep. of Korea, Dem. P. Rep. of Netherlands Norway No member body expressed disapproval of the document. 0 International Organkation for Standardkation, 1981 Poland Romania South Africa, Rep. of Spain Sweden Switzerland United Kingdom USA USSR Printed in Switzerland SIST EN ISO 6433:1998
INTERNATIONAL STANDARD ISO 64334981 (EI Technical drawings - Item references 1 Scope and field of application This International Standard gives general rules for the applica- tion and presentation of item references on technical drawings. In the context of this International Standard the purpose of item references is restricted to the identification of component Parts of assemblies and/or the identification of individual items detailed on the same drawing. 2 References I SO 128, Technical drawings - Genera/ principles of presen ta- tion. 1) I SO 309811, Technical drawings - Lettering - Part 7 : Cur- ren tly used charac ters. ISO 7573, Technical drawings - kern /ist2) 3 General requirements 3.1 lt is recommended that item referen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.