EN ISO 24096-1:2024
(Main)Technical product documentation (TPD) - Classification of requirements - Part 1: Framework (ISO 24096‑1:2024)
Technical product documentation (TPD) - Classification of requirements - Part 1: Framework (ISO 24096‑1:2024)
This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc.
This document:
— gives background information why such systems are useful in many areas of manufacturing;
— can be referred to for the concept of classification of requirements;
— functions as a framework for applying such systems in technical product documentation (TPD);
— indicates the needed elements for a classification system;
— supports with aspects in the choice of symbols for a classification system.
As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD.
This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.
Technische Produktdokumentation (TPD) - Klassifizierung von Anforderungen - Teil 1: Allgemeine Grundlagen (ISO 24096‑1:2024)
Documentation technique de produits (TPD) - Classification des exigences - Partie 1: Cadre (ISO 24096‑1:2024)
Le présent document spécifie un cadre permettant de construire de systèmes de classification des exigences. Ces systèmes peuvent être utilisés pour indiquer des exigences d’importance particulière, et les communiquer pour l’organisation de la production, la vérification, l’audit, etc.
Le présent document:
— donne des informations de base sur les raisons pour lesquelles ces systèmes sont utiles dans de nombreux domaines de fabrication;
— peut être consulté pour le concept de classification des exigences;
— fonctionne comme un cadre pour l’application de ces systèmes dans la documentation technique de produits (TPD);
— indique les éléments nécessaires à un système de classification;
— prend en charge des aspects du choix des symboles pour un système de classification.
En tant que cadre, le présent document ne donne pas les détails d’un système de classification spécifique. À la place, il sert de base à un système spécifique à une organisation qui contient des détails tels que des notations et des symboles, des niveaux de classification, des procédures d’évaluation, etc., y compris l’usage et l’interprétation dans la TPD.
Le présent document ne spécifie ni les conséquences contractuelles d’une classification (par exemple les actions nécessaires comme le choix des outils, l’indice de fiabilité ou la capacité d’un procédé pour un niveau de classification), ni les autres références à des normes ou documents pour le traitement des classifications et d’une non-conformité à des exigences.
Tehnična dokumentacija proizvodov (TDP) - Razvrščanje zahtev - 1. del: Okvirni podatki (ISO 24096-1:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Tehnična dokumentacija proizvodov (TDP) - Razvrščanje zahtev - 1. del: Okvirni
podatki (ISO 24096-1:2024)
Technical product documentation (TPD) - Classification of requirements - Part 1:
Framework (ISO 24096-1:2024)
Technische Produktdokumentation (TPD) - Klassifizierung von Anforderungen - Teil 1:
Allgemeine Grundlagen (ISO 24096-1:2024)
Documentation technique de produits (TPD) - Classification des exigences - Partie 1:
Cadre (ISO 24096-1:2024)
Ta slovenski standard je istoveten z: EN ISO 24096-1:2024
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 24096-1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 01.100.01
English Version
Technical product documentation (TPD) - Classification of
requirements - Part 1: Framework (ISO 24096-1:2024)
Documentation technique de produits (TPD) - Technische Produktdokumentation (TPD) -
Classification des exigences - Partie 1: Cadre (ISO Klassifizierung von Anforderungen - Teil 1: Allgemeine
24096-1:2024) Grundlagen (ISO 24096-1:2024)
This European Standard was approved by CEN on 24 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24096-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 24096-1:2024) has been prepared by Technical Committee ISO/TC 10
"Technical product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall
be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 24096-1:2024 has been approved by CEN as EN ISO 24096-1:2024 without any
modification.
International
Standard
ISO 24096-1
First edition
Technical product documentation
2024-09
(TPD) — Classification of
requirements —
Part 1:
Framework
Documentation technique de produits (TPD) — Classification des
exigences —
Partie 1: Cadre
Reference number
ISO 24096-1:2024(en) © ISO 2024
ISO 24096-1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 24096-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Basic rules . 2
4.1 General .2
4.2 Description of requirement class .3
4.3 Use of a classification system .3
4.4 Application .3
4.5 Definition of classification levels .4
Annex A (informative) Guidance for class implication and system application . 5
Annex B (informative) Guidance for indication, definition of requirement classes and the
selection of symbols . 7
Annex C (informative) Guidance for indication in technical product documentation and placing
of symbols . 9
Bibliography .12
iii
ISO 24096-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 10, Technical product documentation,
Subcommittee SC 6, Mechanical engineering documentation, in collaboration with the European Committee
for Standardization (CEN) Technical Committee CEN/SS F01, Technical drawings, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 24096 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 24096-1:2024(en)
Introduction
This document addresses the classification of requirements. It provides a framework for building systems to
enable the classification of requirements and an indication of the classification in the functional specification,
FUN-SPEC, to support communication of the consequences of nonconformity to functional requirements.
FUN-SPEC (see ISO/TS 21619) is a part of the technical product documentation (TPD). Other approaches
than classification of requirements can be state of the art in achieving the objective of securing the end
product.
This document has been developed mainly to be implemented within industry, e.g. the automotive and
aerospace industries. However, it can also be used in other engineering fields.
Classification of requirements is a tool by which subsequent parties and stakeholders can be informed of the
level of consequences of nonconformity of requirements. This facilitates the guiding of production and quality
assurance resources (e.g. purchasing, production planning, control, revision). The classification system
relies on established procedures, regulatory framework and contractual agreements for implementation
and follow up as present in all modern industry.
There are several examples of industrial stakeholders that deploy their own or partially self-developed
system and methodology for classification of requirements. There has previously not been any ISO document
that pragmatically describes “what is” and “how to create” a classification system. This series bridges the
identified gap and meets the need to describe how to introduce and work with a classification system in an
industrial and design context.
Knowledge of the consequences of nonconformity, with requirements and actions taken to resolve the source
of the deviation from the given requirements, will have a positive effect on product quality, user safety and
economy of the product. Production and inspection resources can then be used where they are most needed.
Annex A gives guidance for class implication and system application.
Annex B gives guidance for indication, definition of requirement classes and the selection of symbols.
Annex C gives guidance for indication in TPD and placing of symbols.
v
-----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.