EN ISO 15614-2:2005

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)

ISO 15614-2:2005 specifies how a preliminary welding procedure specification is qualified by welding procedure tests.
It applies to the arc welding of wrought and cast aluminium and its alloys.
It does not apply to finishing welding of aluminium castings, which is dealt with by ISO 15614-4.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 2: Lichtbogenschweißen von Aluminium und seinen Legierungen (ISO 15614-2:2005)

Dieses Dokument legt fest, wie eine vorläufige Schweißanweisung durch Schweißverfahrensprüfungen qualifiziert wird.
Dieses Dokument ist Teil einer Normenreihe. Einzelheiten dieser Normenreihe sind in EN ISO 15607:2003, Anhang A, angegeben.
Dieses Dokument definiert die Bedingungen für die Durchführung der Schweißverfahrensprüfungen und den Geltungsbereich für Schweißverfahren für alle praktischen schweißtechnischen Tätigkeiten innerhalb des Geltungsbereichs nach Abschnitt 8.
Dieses Dokument wird angewendet für das Lichtbogenschweißen von Aluminium-Knet- und -Gusswerkstoffen und ihren Legierungen. In diesem Dokument wird der Begriff Aluminium für Aluminium und Aluminiumlegierungen verwendet.
Dieses Dokument wird nicht angewendet für das Fertigungsschweißen von Aluminium-Gusswerkstoffen, das in prEN ISO 15614-4 behandelt wird.
Lichtbogenschweißen von Aluminium umfasst die folgenden Schweißprozesse nach EN ISO 4063:
-   131:   Metall-Inertgasschweißen (MIG-Schweißen);
-   141:   Wolfram-Inertgasschweißen (WIG-Schweißen);
-   15:   Plasmaschweißen.
ANMERKUNG   Spezielle Betriebs-, Werkstoff- oder Herstellbedingungen können umfangreicheres Prüfen, als in diesem Dokument festgelegt, verlangen (siehe 7.1).
Die Grundsätze dieses Dokumentes dürfen bei anderen Schmelzschweißverfahren angewendet werden.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 2: Soudage à l'arc de l'aluminium et de ses alliages (ISO 15614-2:2005)

L'ISO 15614-2:2005 spécifie comment un descriptif de mode opératoire de soudage préliminaire est qualifié par une épreuve.
Elle s'applique au soudage à l'arc de l'aluminium corroyé et moulé et de ses alliages.
Elle ne s'applique pas à la réparation par soudage pour les travaux de finition des pièces moulées en aluminium qui est traitée par l'ISO 15614-4.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega postopka - 2. del: Obločno varjenje aluminija in njegovih zlitin (ISO 15614-2:2005)

General Information

• Status: Published
• Publication Date: 14-Apr-2005
• Withdrawal Date: 30-Oct-2005
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Apr-2005
• Completion Date: 15-Apr-2005
• Directive: 2009/105/EC - DIRECTIVE 2009/105/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 September 2009 relating to simple pressure vessels
• Directive: 2009/105//EC - DIRECTIVE 2009/105/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 September 2009 relating to simple pressure vessels
• Directive: 2014/29/EU - Directive 2014/29/EU of The European Parliament and of the Council of 26 February 2016 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
• Ref Project: SIST EN ISO 15614-2:2005 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)

Relations

• Replaces: EN 288-4:1992/AC:1993 - Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys
• Effective Date: 22-Dec-2008
• Replaces: EN 288-4:1992/A1:1997 - Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys
• Effective Date: 22-Dec-2008
• Replaces: EN 288-4:1992 - Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 15614-2:2005/AC:2009 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005/Cor 2:2009)
• Effective Date: 08-Apr-2009
• Revised: prEN ISO 15614-2 - Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15614-2:2005
01-julij-2005
1DGRPHãþD
SIST EN 288-4:1996
SIST EN 288-4:1996/A1:1999
SIST EN 288-4:1996/AC:1999
3RSLVLQNYDOLILNDFLMDYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOH3UHVNXVYDULOQHJD
SRVWRSNDGHO2EORþQRYDUMHQMHDOXPLQLMDLQQMHJRYLK]OLWLQ,62
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 2: Lichtbogenschweißen von Aluminium und seinen
Legierungen (ISO 15614-2:2005)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 2:
Soudage a l'arc de l'aluminium et de ses alliages (ISO 15614-2:2005)
Ta slovenski standard je istoveten z: EN ISO 15614-2:2005
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 15614-2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15614-2:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 15614-2:2005



EUROPEAN STANDARD
EN ISO 15614-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2005
ICS 25.160.10 Supersedes EN 288-4:1992
English version
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 2: Arc welding of
aluminium and its alloys (ISO 15614-2:2005)
Descriptif et qualification d'un mode opératoire de soudage Anforderung und Anerkennung von Schweißverfahren für
pour les matériaux métalliques - Epreuve de qualification metallische Werkstoffe - Schweißverfahrensprüfung - Teil
d'un mode opératoire de soudage - Partie 2: Soudage à 2: Lichtbogenschweißen von Aluminium und seinen
l'arc de l'aluminium et de ses alliages (ISO 15614-2:2005) Legierungen (ISO 15614-2:2005)
This European Standard was approved by CEN on 27 May 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15614-2:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15614-2:2005
EN ISO 15614-2:2005 (E)
Contents Page
Foreword.4
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Preliminary welding procedure specification (pWPS) .7
5 Welding procedure test.7
6 Test piece .8
6.1 General.8
6.2 Shape and dimensions of test pieces .
...