EN ISO 24024-2:2021

Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 24024-2:2021)

This document specifies the methods of preparation of test samples and the test methods to be used in determining the properties of PVC resins. Requirements for handling test material and for conditioning the material before testing are given here. In addition, properties and test methods which are suitable and necessary to characterize PVC resins are listed.

Kunststoffe - Homo- und Copolymere des Vinylchlorids - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 24024-2:2021)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von PVC Polymeren anzuwendenden Prüfverfahren fest. Es enthält Anforderungen an die Handhabung des Prüfmaterials und an das Konditionieren des Materials vor der Prüfung. Darüber hinaus sind Eigenschaften und Prüfverfahren aufgelistet, die zur Charakterisierung von PVC Polymeren geeignet und notwendig sind.

Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie 2: Préparation des échantillons pour essai et détermination des propriétés (ISO 24024-2:2021)

Le présent document spécifie les méthodes de préparation des échantillons pour essai et les méthodes d'essai qui doivent être utilisées pour la détermination des propriétés des résines PVC. Les exigences relatives à la manipulation du matériau d'essai et au conditionnement du matériau avant essai sont indiquées. En outre, les propriétés et méthodes d'essai qui sont utiles et nécessaires pour caractériser les résines PVC sont énumérées.

Polimerni materiali - Homo- in kopolimeri vinilklorida - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 24024-2:2021)

General Information

• Status: Published
• Publication Date: 23-Feb-2021
• Withdrawal Date: 30-Aug-2021
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 24-Feb-2021
• Completion Date: 24-Feb-2021
• Ref Project: SIST EN ISO 24024-2:2021 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 24024-2:2021)

Relations

• Replaces: EN ISO 1060-2:1999 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998)
• Effective Date: 02-Mar-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24024-2:2021
01-april-2021
Nadomešča:
SIST EN ISO 1060-2:2000
Polimerni materiali - Homo- in kopolimeri vinilklorida - 2. del: Priprava
preskušancev in ugotavljanje lastnosti (ISO 24024-2:2021)
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of
test samples and determination of properties (ISO 24024-2:2021)
Kunststoffe - Homo- und Copolymere des Vinylchlorids - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO 24024-2:2021)
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie
2: Préparation des échantillons pour essai et détermination des propriétés (ISO 24024-
2:2021)
Ta slovenski standard je istoveten z: EN ISO 24024-2:2021
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 24024-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 24024-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 24024-2:2021


EN ISO 24024-2
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2021
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 1060-2:1999
English Version

Plastics - Homopolymer and copolymer resins of vinyl
chloride - Part 2: Preparation of test samples and
determination of properties (ISO 24024-2:2021)
Plastiques - Résines d'homopolymères et de Kunststoffe - Homo- und Copolymere des Vinylchlorids
copolymères de chlorure de vinyle - Partie 2: - Teil 2: Herstellung von Probekörpern und
Préparation des échantillons pour essai et Bestimmung von Eigenschaften (ISO 24024-2:2021)
détermination des propriétés (ISO 24024-2:2021)
This European Standard was approved by CEN on 8 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24024-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 24024-2:2021
EN ISO 24024-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 24024-2:2021
EN ISO 24024-2:2021 (E)
European foreword
This document (EN ISO 24024-2:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2021, and conflicting national standards shall
be withdrawn at the latest by August 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1060-2:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24024-2:2021 has been approved by CEN as EN ISO 24024-2:2021 without
...