EN 1807:1999+A1:2009
(Main)Safety of woodworking machines - Band sawing machines
Safety of woodworking machines - Band sawing machines
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings.
This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89.
This European Standard does not apply to:
- hand held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 1 Hand-held motor operated electric tools are covered by the requirements of
EN 60745-1:2006 together with EN 60745-2-20:2003.
- transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand.
NOTE 2 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-5:2002.
This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws.
This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard.
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen
Dieses Dokument spezifiziert alle in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen
und Gefährdungsereignisse, die auf stationäre und verschiebbare Bandsägemaschinen entweder
mit Handbeschickung und/oder Handentnahme oder automatischer Beschickung und/oder Entnahme
zutreffen — im Folgenden als „Maschinen“ bezeichnet —, die bestimmt sind zum Schneiden von Massivholz,
Spanplatten, Faserplatten und Sperrholz sowie diesen Werkstoffen, wenn sie mit Kunststoff beschichtet oder
mit Kunststoffkanten versehen sind."
!gelöschter Text"
!gelöschter Text" Diese Europäische Norm behandelt nicht die Gefährdungen bezüglich elektromagnetischer
Verträglichkeit (EMV), die in der EMV-Richtlinie 89/336/EWG vom 05-03-89 aufgeführt sind.
Diese europäische Norm gilt nicht für:
handgeführte motorbetriebene Elektrowerkzeuge oder irgendwelche Einrichtungen, die ihre Verwendung
in einer anderen Weise, d. h. in einem Gestell montiert, ermöglichen;"
!ANMERKUNG 1 Handgeführte motorbetriebene Elektrowerkzeuge sind durch die Anforderungen in
EN 60745-1:2006 zusammen mit EN 60745-2-20:2003 erfasst."
transportable Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist,
aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden, und die
von einer Person von Hand angehoben werden können."
!ANMERKUNG 2 Transportable, elektrisch angetriebene Maschinen sind durch die Anforderungen in
EN 61029-1:2000 zusammen mit prEN 61029-2-5:2002 erfasst."
Diese europäische Norm behandelt nicht die Gefährdungen, die von Bearbeitungsvorgängen (z. B. Fräsen
und Sägen) verbundener Maschinen wie z. B. Spanern und Kreissägen ausgehen.
Diese Norm ist in erster Linie auf Maschinen anzuwenden, die nach dem Ausgabedatum dieser Norm
hergestellt werden.
Sécurité des machines pour le travail du bois - Machines à scier à ruban
!Le présent document traite de tous les phénomènes, situations et événements dangereux significatifs tels qu’énumérés dans l'Article 4 qui sont pertinents pour les machines à scier à ruban fixes et déplaçables munies d'un système de chargement et/ou de déchargement soit manuel, soit automatique (ci-après désignées «machines»), conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué, ainsi que ces matériaux lorsque leur surface ou leurs chants sont recouverts de plastique."
!texte supprimé"
!texte supprimé" La présente norme européenne ne traite pas les risques relatifs à la compatibilité électromagnétique (CEM) tels que prescrits dans la Directive CEM 89/336/CEE du 89-05-03.
La présente norme européenne ne s'applique pas aux :
- !outils électriques à moteur portatifs ou toute adaptation permettant leur utilisation de manière différente, c'est-à-dire fixés sur un établi ;"
NOTE 1 !Les outils électriques portatifs à moteur sont couverts par les exigences de l'EN 60745-1:2006 et de l'EN 60745-2-20:2003."
- !machines déplaçables installées sur un établi ou une table similaire à un établi, destinées à exécuter des travaux dans une position fixe, pouvant être soulevées à la main par une personne."
NOTE 2 !Les machines déplaçables à entraînement électrique sont couvertes par les exigences de l'EN 61029-1:2000 et de l'EN 61029-2-5:2002."
La présente norme européenne ne traite pas des phénomènes dangereux produits par les procédés d'usinage (par exemple fraisage et sciage) dus aux machines associées (par exemple scie circulaire à chanfreiner).
La présente norme est applicable avant tout aux machines fabriquées après la date de publication de la présente norme.
Varnost lesnoobdelovalnih strojev - Tračne žage
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - BandsägemaschinenSécurité des machines pour le travail du bois - Machines à scier à rubanSafety of woodworking machines - Band sawing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1807:1999+A1:2009SIST EN 1807:2000+A1:2009en01-november-2009SIST EN 1807:2000+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1807:1999+A1
September 2009 ICS 79.120.10 Supersedes EN 1807:1999English Version
Safety of woodworking machines - Band sawing machines
Sécurité des machines pour le travail du bois - Machines à scier à ruban
Sicherheit von Holzbearbeitungsmaschinen - Bandsägemaschinen This European Standard was approved by CEN on 6 May 1999 and includes Amendment 1 approved by CEN on 30 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1807:1999+A1:2009: ESIST EN 1807:2000+A1:2009
Safe working practice . 69Annex B (normative)
Test for adjustable guard over cutting area of saw blade . 80Annex C (normative)
Operating conditions for noise emission measurement . 82Annex D (informative)
Indication of the clauses of this European standard that are applicable to each type of machine covered by the European standard . 85Annex E (informative)
Machines requiring special procedures . 89Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC" . 90Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 91!Bibliography" . 92 SIST EN 1807:2000+A1:2009
!EN ISO 12100-1:2003" for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
This European Standard is a type "C" standard as defined in !EN ISO 12100-1:2003". The extent to which hazards are covered is indicated in the scope of this European Standard. The requirements of this standard concern designers, manufacturers, suppliers and importers of band sawing machines, re-sawing machines and log sawing machines. This European Standard also includes information to be provided by the manufacturer to the user. 1 Scope !This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as “machines” designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings." !deleted text" !deleted text" This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89. This European Standard does not apply to: !hand held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;" !NOTE 1 Hand-held motor operated electric tools are covered by the requirements of
EN 60745-1:2006 together with EN 60745-2-20:2003." !transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand." !NOTE 2 Transportable electrically driven machines are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-5:2002." This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws. This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard. SIST EN 1807:2000+A1:2009
!(IEC 60947-4-1:2000)" !EN 60947-5-1:2004", Specification for low voltage switchgear and control gear — Part 5: Control circuits, devices and switching elements — Section 1: Electromechanical control circuit devices
!(IEC 60947-5-1:2003)" !EN 61029:2000", Safety of transportable motor operated electric tools — Part 1: General requirements !(IEC 61029-1:1990, modified)" !EN 61029-2-5:2002, Safety of transportable motor-operated electric tools — Part 2: Particular requirements for band saws (IEC 61029-2-5:1993+A1:2001, modified)" !CLC/TS 61496-2:2006", Safety of machinery — Electro-sensitive protective equipment — !Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
(IEC 61496-2:2006)" EN ISO 3743-1:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, moveable sources in reverberant fields — Part 1: Comparison method for hard walled test rooms (ISO 3743-1:1994) EN ISO 3743-2:1996, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, moveable sources in reverberant fields — Part 2: Methods for special reverberant test rooms (ISO 3743-2:1996) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.