Vitrified clay pipe systems for drains and sewers - Part 3: Test methods

This European Standard specifies requirements for testing of products manufactured from vitrified clay and other materials specified in the following standards:
   pipes, fittings and joints according to EN 295-1;
   adaptors, connectors and flexible couplings according to EN 295-4;
   perforated pipes and fittings according to EN 295-5;
   components of manholes and inspection chambers according to EN 295 6;
   pipes and joints for pipe jacking according to EN 295-7.

Steinzeugrohrsysteme für Abwasserleitungen und -kanäle - Teil 3: Prüfverfahren

Diese Europäische Norm legt Anforderungen für die Prüfung von Produkten aus Steinzeug und anderen
Werkstoffen fest, die in den folgenden Normen festgelegt sind:
- Rohre, Formstücke und Verbindungen nach EN 295-1;
- Übergangs- und Anschlussbauteile und flexible Kupplungen nach EN 295-4;
- gelochte Rohre und Formstücke nach EN 295-5;
- Bauteile für Einsteig- und Inspektionsschächte nach EN 295-6;
- Rohre und Verbindungen für Rohrvortrieb nach EN 295-7.

Systèmes de tuyaux et accessoires en grès vitrifié pour les collecteurs et branchements d'assainissement - Partie 3: Méthodes d'essai

La présente Norme européenne spécifie les exigences d’essais réalisés sur des produits fabriqués à partir de grès vitrifié et d'autres matériaux spécifiés dans les normes suivantes :
- tuyaux, accessoires et joints conformes à l’EN 295-1 ;
- adaptateurs, raccords et manchons flexibles conformes à l’EN 295-4 ;
- tuyaux perforés et accessoires conformes à l’EN 295-5 ;
- éléments de boîtes de branchement et d'inspection conformes à l’EN 295-6 ;
- tuyaux et joints destinés au fonçage conformes à l’EN 295-7.

Keramični cevni sistemi za odvod odpadne vode in kanalizacijo - 3. del: Preskusne metode

Ta evropski standard določa zahteve za preskušanje izdelkov, izdelanih iz keramike in drugih materialov, navedenih v naslednjih standardih: cevi, fazonski kosi in spoji iz standarda EN 295-1; prilagodilni in povezovalni deli ter prožne spojke iz standarda EN 295-4; perforirane cevi in fazonski kosi iz standarda EN 295-5; sestavni deli jaškov in revizijskih komor iz standarda EN 295-6; cevi in spoji za potisne cevi iz standarda EN 295-7.

General Information

Status
Published
Publication Date
10-Jan-2012
Withdrawal Date
10-Jan-2013
Current Stage

Relations

Buy Standard

Standard
EN 295-3:2012
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 295-3:2012
01-marec-2012
1DGRPHãþD
SIST EN 295-3:1996
SIST EN 295-3:1996/A1:2000
.HUDPLþQLFHYQLVLVWHPL]DRGYRGRGSDGQHYRGHLQNDQDOL]DFLMRGHO3UHVNXVQH
PHWRGH
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
Steinzeugrohrsysteme für Abwasserleitungen und -kanäle - Teil 3: Prüfverfahren
Systèmes de tuyaux et accessoires en grès pour les réseaux de branchement et
d’assainissement - Partie 3: Méthodes d'essai
Ta slovenski standard je istoveten z: EN 295-3:2012
ICS:
23.040.50 Cevi in fitingi iz drugih Pipes and fittings of other
materialov materials
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN 295-3:2012 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 295-3:2012

---------------------- Page: 2 ----------------------

SIST EN 295-3:2012


EUROPEAN STANDARD
EN 295-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2012
ICS 93.030 Supersedes EN 295-3:1991
English Version
Vitrified clay pipe systems for drains and sewers - Part 3: Test
methods
Systèmes de tuyaux et accessoires en grès vitrifié pour les Steinzeugrohrsysteme für Abwasserleitungen und -kanäle -
collecteurs et branchements - Partie 3: Méthodes d'essai Teil 3: Prüfverfahren
This European Standard was approved by CEN on 19 November 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 295-3:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 295-3:2012
EN 295-3:2012 (E)
Contents Page
Foreword .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Symbols and abbreviations .7
5 Test for squareness of ends .8
5.1 Test of squareness of ends for pipes according to EN 295-1:2012 .8
5.2 Test of squareness of ends for pipes according to EN 295-7:2012 .8
6 Straightness test .9
7 Crushing strength test . 10
7.1 General . 10
7.1.1 Preconditioning . 10
7.1.2 Testing machine. 11
7.1.3 Loading .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.