EN 16321-1:2013

Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: Test methods for the type approval efficiency assessment of petrol vapour recovery systems

This European Standard specifies the measurement and test methods for the efficiency assessment of petrol vapour recovery systems for service stations (Stage II).

Benzindampf-Rückführung während der Betankung von Kraftfahrzeugen an Tankstellen - Teil 1: Prüfverfahren für die Typzulassung der Effinzienzbewertung von Gasrückführungssystemen

Die vorliegende Europäische Norm legt die Mess- und Prüfverfahren für die Effizienzbewertung von Gasrückführungssystemen für Tankstellen fest (Phase II).

Récupération des vapeurs d'essence lors du ravitaillement en carburant des véhicules à moteur dans les stations-service - Partie 1: Méthodes d'essai pour l'homologation et l'évaluation de l'efficacité des systèmes de récupération des vapeurs

La présente Norme européenne spécifie les méthodes de mesurage et d’essai pour l’évaluation de l’efficacité des systèmes de récupération des vapeurs d’essence dans les stations-service (phase II).

Rekuperiranje bencinskih hlapov med polnjenjem motornih vozil na bencinskih servisih - 1. del: Preskusne metode za odobritev tipa, ocena učinkovitosti sistema za rekuperiranje bencinskih hlapov

Ta evropski standard določa merilne in preskusne metode za oceno učinkovitosti sistemov za rekuperiranje bencinskih hlapov za bencinske servise (II. stopnja).

General Information

• Status: Published
• Publication Date: 24-Sep-2013
• Withdrawal Date: 30-Mar-2014
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 393 - Equipment for storage tanks and for service stations
• Drafting Committee: CEN/TC 393/WG 7 - Stage II vapour recovery systems at filling stations
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 07-May-2019
• Directive: 2009/126/EC - Stage II petrol vapour recovery during refuelling of motor vehicles at service stations
• Mandate: M/456 - Mandate to CEN for the development of European standards to establish the petrol vapour recovery efficiency of new Stage II petrol vapour recovery equipment and the in-use performance of such equipment once installed at service stations.
• Ref Project: SIST EN 16321-1:2013 - Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1: Test methods for the type approval efficiency assessment of petrol vapour recovery systems

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16321-1:2013
01-december-2013
5HNXSHULUDQMHEHQFLQVNLKKODSRYPHGSROQMHQMHPPRWRUQLKYR]LOQDEHQFLQVNLK
VHUYLVLKGHO3UHVNXVQHPHWRGH]DRGREULWHYWLSDRFHQDXþLQNRYLWRVWLVLVWHPD
]DUHNXSHULUDQMHEHQFLQVNLKKODSRY
Petrol vapour recovery during refuelling of motor vehicles at service stations - Part 1:
Test methods for the type approval efficiency assessment of petrol vapour recovery
systems
Benzindampf-Rückrückführung während der Betankung von Kraftfahrzeugen an
Tankstellen - Teil 1: Prüfverfahren für die Typzulassung der Effizienzbewertung von
Gasrückführsystemen
Récupération des vapeurs d'essence lors du ravitaillement en carburant des véhicules à
moteur dans les stations-service - Partie 1: Méthodes d'essai pour l'homologation et
l'évaluation de l'efficacité des systèmes de récupération des vapeurs
Ta slovenski standard je istoveten z: EN 16321-1:2013
ICS:
75.200 2SUHPD]DVNODGLãþHQMH Petroleum products and
QDIWHQDIWQLKSURL]YRGRYLQ natural gas handling
]HPHOMVNHJDSOLQD equipment
SIST EN 16321-1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16321-1:2013

---------------------- Page: 2 ----------------------

SIST EN 16321-1:2013


EUROPEAN STANDARD
EN 16321-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2013
ICS 75.200
English Version
Petrol vapour recovery during refuelling of motor vehicles at
service stations - Part 1: Test methods for the type approval
efficiency assessment of petrol vapour recovery systems
Récupération des vapeurs d'essence lors du ravitaillement Benzindampf-Rückführung während der Betankung von
en carburant des véhicules à moteur dans les stations- Kraftfahrzeugen an Tankstellen - Teil 1: Prüfverfahren für
service - Partie 1: Méthodes d'essai pour l'homologation et die Typzulassung der Effinzienzbewertung von
l'évaluation de l'efficacité des systèmes de récupération Gasrückführungssystemen
des vapeurs
This European Standard was approved by CEN on 26 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16321-1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 16321-1:2013
EN 16321-1:2013 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Requirements .8
4.1 General .8
4.2 Efficiency .8
4.3 Petrol vapour /petrol ratio .8
4.4 Proportionality .
...