EN 12164:2011

Copper and copper alloys - Rod for free machining purposes

This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.

Kupfer und Kupferlegierungen - Stangen für die spanende Bearbeitung

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und Grenz-abmaße für durch Ziehen oder Pressen endgefertigte Stangen in runder, quadratischer, sechseckiger oder achteckiger Form aus Kupferlegierungen für die spanende Bearbeitung fest. Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforde-rungen dieser Norm sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Barres pour décolletage

La présente Norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles
des barres en alliage de cuivre de forme ronde, carrée, hexagonale ou octogonale, fabriquées par étirage ou
filage, particulièrement conçues pour le décolletage.
Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux
prescriptions de la présente Norme européenne sont également spécifiées.

Baker in bakrove zlitine - Palice za obdelavo z odrezovanjem na avtomatih

Dokument določa sestavo, zahteve za lastnosti in odstopke mer za ravne palice iz bakrovih zlitin za obdelavo z odrezovanjem na avtomatih. Določeni so tudi postopki vzorčenja in metode preskušanja za preverjanje skladnosti z zahtevami tega dokumenta. Dokument vsebuje amandma 1, ki spreminja besedilo uvoda, preglednico 2 in preglednico 7.

General Information

• Status: Withdrawn
• Publication Date: 31-May-2011
• Withdrawal Date: 19-Jul-2016
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2016
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Ref Project: SIST EN 12164:2011 - Copper and copper alloys - Rod for free machining purposes

Relations

• Replaces: EN 12164:1998/A1:2000 - Copper and copper alloys - Rod for free machining purposes
• Effective Date: 28-May-2011
• Replaces: EN 12164:1998 - Copper and copper alloys - Rod for free machining purposes
• Effective Date: 28-May-2011
• Replaced By: EN 12164:2016 - Copper and copper alloys - Rod for free machining purposes
• Effective Date: 27-Jul-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Palice za obdelavo z odrezovanjem na avtomatihKupfer und Kupferlegierungen - Stangen für die spanende BearbeitungCuivre et alliages de cuivre - Barres pour décolletageCopper and copper alloys - Rod for free machining purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 12164:2011SIST EN 12164:2011en,fr,de01-oktober-2011SIST EN 12164:2011SLOVENSKI
STANDARDSIST EN 12164:1998/A1:2002SIST EN 12164:19981DGRPHãþD



SIST EN 12164:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12164
June 2011 ICS 77.150.30 Supersedes EN 12164:1998English Version
Copper and copper alloys - Rod for free machining purposes
Cuivre et alliages de cuivre - Barres pour décolletage
Kupfer und Kupferlegierungen - Stangen für die spanende Bearbeitung This European Standard was approved by CEN on 14 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12164:2011: ESIST EN 12164:2011



EN 12164:2011 (E) 2 Contents Page Foreword .4Introduction .61Scope .72Normative references .73Terms and definitions .74Designations .84.1Material .84.1.1General .84.1.2Symbol .84.1.3Number .84.2Material condition .84.3Product .85Ordering information .96Requirements . 106.1Composition . 106.2Mechanical properties . 106.3Resistance to dezincification . 106.4Residual stress
...