EN 17360:2020

Inland navigation vessels - Stanchions and holders for tiltable and detachable railings

This document is applicable to stanchions and holders of tiltable and detachable railings (railing type CT and CD according to EN 711 in work areas) for inland navigation vessels. These railings are situated in the side deck areas, where a permanently fitted railing can be an obstacle for loading/discharging operations.
The stanchions are designed for use with handrails and intermediate guardrails made of wire ropes.

Fahrzeuge der Binnenschifffahrt - Stützen und Halter für umlegbare und losnehmbare Geländer

Dieses Dokument gilt für die Stützen und Halter der umlegbaren und losnehmbaren Geländer (Geländerbauart CT und CD nach EN 711 im Arbeitsbereich) für Fahrzeuge der Binnenschifffahrt. Diese Geländer werden in Bereiche der Gangborde eingesetzt, in denen ein festes Geländer beim Güterumschlag hinderlich sein kann.
Die Geländerstützen sind für die Verwendung mit Handläufen und Zwischenzügen aus Drahtseilen bestimmt.

Bateaux de navigation intérieure - Chandeliers et support pour garde-corps rabattables et démontables

Le présent document est applicable aux chandeliers et supports pour garde-corps rabattables et démontables (garde-corps de types CT et CD conformément à l’EN 711 dans les zones de travail) pour les bateaux de navigation intérieure. Ces garde-corps sont situés dans les zones des plats bords, où un gardecorps fixé à demeure peut être un obstacle pour les opérations de chargement/déchargement.
Les chandeliers sont conçus pour être utilisés avec des mains courantes et des filières intermédiaires en câbles métalliques.

Plovila za celinske vode - Oporni drogovi in držala za nagibne in odstranljive palubne ograje

General Information

• Status: Published
• Publication Date: 25-Feb-2020
• Withdrawal Date: 30-Aug-2020
• ICS: 47.020.10 - Hulls and their structure elements
• ICS: 47.060 - Inland navigation vessels
• Technical Committee: CEN/TC 15 - Inland navigation vessels
• Drafting Committee: CEN/TC 15 - Inland navigation vessels
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Feb-2020
• Due Date: 11-Oct-2020
• Completion Date: 26-Feb-2020
• Ref Project: SIST EN 17360:2020 - Inland navigation vessels - Stanchions and holders for tiltable and detachable railings

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17360:2020
01-maj-2020
Plovila za celinske vode - Oporni drogovi in držala za nagibne in odstranljive
palubne ograje
Inland navigation vessels - Stanchions and holders for tiltable and detachable railings
Fahrzeuge der Binnenschifffahrt - Stützen und Halter für umlegbare und losnehmbare
Geländer
Bateaux de navigation intérieure - Chandeliers et supports pour gardecorps rabattables
et démontables
Ta slovenski standard je istoveten z: EN 17360:2020
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.060 Jezerska in rečna plovila Inland navigation vessels
SIST EN 17360:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17360:2020

---------------------- Page: 2 ----------------------
SIST EN 17360:2020


EN 17360
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 47.020.10; 47.060
English Version

Inland navigation vessels - Stanchions and holders for
tiltable and detachable railings
Bateaux de navigation intérieure - Chandeliers et Fahrzeuge der Binnenschifffahrt - Stützen und Halter
support pour garde-corps rabattables et démontables für umlegbare und losnehmbare Geländer
This European Standard was approved by CEN on 13 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17360:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17360:2020
EN 17360:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Stanchion and holders for tiltable railings (CT) . 6
4.2.1 Assembly . 6
4.2.2 Parts list . 8
4.2.3 Parts . 8
4.3 Stanchion and holders for detachable railings (CD) . 9
4.3.1 Assembly . 9
4.3.2 Parts list .
...