EN 12164:2011
(Main)Copper and copper alloys - Rod for free machining purposes
Copper and copper alloys - Rod for free machining purposes
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod, in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding, especially intended for free machining purposes.
The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
Kupfer und Kupferlegierungen - Stangen für die spanende Bearbeitung
Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften und Grenz-abmaße für durch Ziehen oder Pressen endgefertigte Stangen in runder, quadratischer, sechseckiger oder achteckiger Form aus Kupferlegierungen für die spanende Bearbeitung fest. Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforde-rungen dieser Norm sind ebenfalls festgelegt.
Cuivre et alliages de cuivre - Barres pour décolletage
La présente Norme européenne spécifie la composition, les caractéristiques et les tolérances dimensionnelles
des barres en alliage de cuivre de forme ronde, carrée, hexagonale ou octogonale, fabriquées par étirage ou
filage, particulièrement conçues pour le décolletage.
Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux
prescriptions de la présente Norme européenne sont également spécifiées.
Baker in bakrove zlitine - Palice za obdelavo z odrezovanjem na avtomatih
Dokument določa sestavo, zahteve za lastnosti in odstopke mer za ravne palice iz bakrovih zlitin za obdelavo z odrezovanjem na avtomatih. Določeni so tudi postopki vzorčenja in metode preskušanja za preverjanje skladnosti z zahtevami tega dokumenta. Dokument vsebuje amandma 1, ki spreminja besedilo uvoda, preglednico 2 in preglednico 7.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Palice za obdelavo z odrezovanjem na avtomatihKupfer und Kupferlegierungen - Stangen für die spanende BearbeitungCuivre et alliages de cuivre - Barres pour décolletageCopper and copper alloys - Rod for free machining purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 12164:2011SIST EN 12164:2011en,fr,de01-oktober-2011SIST EN 12164:2011SLOVENSKI
STANDARDSIST EN 12164:1998/A1:2002SIST EN 12164:19981DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12164
June 2011 ICS 77.150.30 Supersedes EN 12164:1998English Version
Copper and copper alloys - Rod for free machining purposes
Cuivre et alliages de cuivre - Barres pour décolletage
Kupfer und Kupferlegierungen - Stangen für die spanende Bearbeitung This European Standard was approved by CEN on 14 April 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12164:2011: ESIST EN 12164:2011
Determination of mean depth of dezincification . 33A.1Introduction . 33A.2Procedure . 33A.3Expression of results . 33Bibliography . 35 Figures Figure 1 — Measurement of twist of polygonal rod . 12 Figure 2 — Shaped ends of rod, Types . 13 Figure A.1 — Example of contiguous fields . 34
Tables Table 1 — Indicative shaped ends dimensions . 13 Table 2 — Composition of low alloyed copper alloys . 18 Table 3 — Composition of copper-nickel-zinc alloys . 19 Table 4 — Composition of copper-tin alloys . 19 Table 5 — Composition of copper-zinc alloys . 20 Table 6 — Composition of copper-zinc-lead alloys . 21 Table 7 — Composition of complex copper-zinc alloys . 23 Table 8 — Mechanical properties of rod of low alloyed copper alloys . 24 Table 9 — Mechanical properties of rod of copper-nickel-zinc alloys . 25 Table 10 — Mechanical properties of rod of copper-tin alloys . 26 Table 11 — Mechanical properties of rod of copper-zinc alloys . 27 Table 12 — Mechanical properties of rod of copper-zinc-lead alloys . 28 Table 13 — Mechanical properties of rod of complex copper-zinc alloys . 29 Table 14 — Tolerances on diameter of round rod (including deviation from circular form) . 30 Table 15 — Tolerances on width across-flats of regular polygonal rod . 30 Table 16 — Tolerances on straightness of rod . 31 Table 17 — Tolerances on length of nominal length rod . 31 Table 18 — Corner radii for square, hexagonal and octagonal rod . 31 Table 19 — Maximum twist of square, hexagonal and octagonal rod . 32 Table 20 — Sampling rate . 32
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.