LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

This document specifies the design, testing and marking requirements for spring loaded pressure relief valves (PRV), for use in liquefied petroleum gas (LPG) cylinders of water capacity of 0,5 l up to and including 150 l.
These PRVs can be either an integral part of a cylinder valve (see EN ISO 14245 [4] and EN ISO 15995 [5]) or a separate device.

Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche, wiederbefüllbare Flaschen für Flüssiggas (LPG)

Dieses Dokument legt die Anforderungen an die Auslegung, Prüfung und Kennzeichnung von federbelasteten Sicherheitsventilen (PRV, en: pressure relief valves) für die Verwendung in Flaschen für Flüssiggas (LPG, en: liquefied petroleum gas) mit einem Fassungsraum von 0,5 l bis einschließlich 150 l fest.
Bei diesen Sicherheitsventilen kann es sich entweder um ein fest eingebautes Teil eines Flaschenventils (siehe EN ISO 14245 [4] und EN ISO 15995 [5]) oder um eine getrennte Einrichtung handeln.

Équipements et accessoires GPL - Soupapes de sécurité des bouteilles transportables et rechargeables pour gaz de pétrole liquéfiés (GPL)

Le présent document spécifie les exigences de conception, d'essais et de marquage des soupapes de sécurité à action par ressort, utilisées pour les bouteilles de gaz de pétrole liquéfiés (GPL) d'une capacité en eau comprise entre 0,5 l et 150 l inclus.
Ces soupapes peuvent faire partie intégrante du robinet de la bouteille (voir l'EN ISO 14245 [4] et l'EN ISO 15995 [5]) ou constituer un dispositif séparé.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za premične, ponovno polnljive jeklenke za UNP

General Information

Status
Published
Publication Date
08-Dec-2020
Withdrawal Date
29-Jun-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Dec-2020
Due Date
16-Mar-2021
Completion Date
09-Dec-2020

Relations

Buy Standard

Standard
EN 13953:2021
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2021
Nadomešča:
SIST EN 13953:2015
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za premične,
ponovno polnljive jeklenke za UNP
LPG equipment and accessories - Pressure relief valves for transportable refillable
cylinders for Liquefied Petroleum Gas (LPG)
Flüssiggas-Geräte und Ausrüstungsteile - Sicherheitsventile für ortsbewegliche,
wiederbefüllbare Flaschen für Flüssiggas (LPG)
Équipements et accessoires GPL - Soupapes de sécurité des bouteilles transportables
et rechargeables pour gaz de pétrole liquéfiés (GPL)
Ta slovenski standard je istoveten z: EN 13953:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13953
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 23.060.40 Supersedes EN 13953:2015
English Version
LPG equipment and accessories - Pressure relief valves for
transportable refillable cylinders for Liquefied Petroleum
Gas (LPG)
Équipements et accessoires GPL - Soupapes de sécurité Flüssiggas-Geräte und Ausrüstungsteile -
des bouteilles transportables et rechargeables pour gaz Sicherheitsventile für ortsbewegliche,
de pétrole liquéfiés (GPL) wiederbefüllbare Flaschen für Flüssiggas (LPG)
This European Standard was approved by CEN on 1 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13953:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Operating Conditions . 8
5 Materials . 9
5.1 General . 9
5.2 Metallic materials . 9
5.3 Non-metallic materials . 9
5.4 Lubricants, sealants and adhesives . 10
6 Design . 10
6.1 General . 10
6.2 Threads . 11
6.3 Springs . 11
7 Type testing . 11
7.1 General . 11
7.2 Test requirements . 12
7.3 Dimensional checks . 13
7.4 Hydraulic pressure proof test. 13
7.5 Leak tightness test before ageing . 13
7.6 Start to discharge pressure test . 14
7.7 Discharge capacity test . 14
7.8 Leak tightness tests . 14
7.9 Endurance test . 14
7.10 Visual inspection . 15
8 Test report . 15
9 Production testing . 15
10 Marking . 15
11 Documentation . 16
Annex A (informative) Terms used with PRVs . 17
Annex B (normative) Special low temperature requirements for PRVs . 18
Annex C (normative) Sizing of PRVs for LPG cylinders . 19
Annex D (normative) Production testing . 20
D.1 General . 20
D.2 Setting and leak testing of PRVs . 20
D.3 Batch samples . 20
D.4 Rejection criteria . 20
D.5 Documentation . 20
Bibliography . 21

European foreword
This document (EN 13953:2020) has been prepared by Technical Committee CEN/TC 286 “LPG
Equipment and accessories”, the secretariat of which is held by NSAI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13953:2015.
The major changes to this revision include:
— addition of water capacity range in the scope;
— addition of requirements for rubber material;
— change to the nominal set pressure;
— clarification to discharge capacity test;
— clarification to endurance test
This document has been submitted for reference in
— the RID and/or
— the technical annexes of the ADR
NOTE These regulations take precedence over any clause of this standard. It is emphasized that RID/ADR are
being revised regularly at intervals of two years which may lead to temporary non-compliances with the clauses of
this standard.”
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document calls for the use of substances and procedures that may be injurious to health and/or the
environment if adequate precautions are not taken. It refers only to technical suitability. It does not
absolve the user from their legal obligations at any stage.
Protection of the environment is a key political issue in Europe and elsewhere around the world.
Protection of the environment in this document is understood in a very broad sense. The phrase is used,
for example, in relation to the total life-cycle aspects of a product on the environment, including
expenditure of energy, and during all phases of its existence, from mining of raw materials, to fabrication,
packaging, distribution, use, scrapping, recycling of materials, etc.
It is essential that provisions be restricted to a general guidance. Limit values are specified in national
laws.
Protection of the environment is a key political issue in Europe and elsewhere, for CEN/TC 286 this is
covered in CEN/TS 16765 [2], LPG equipment and accessories – Environmental considerations for
CEN/TC 286 standards, and this Technical Specification should be read in conjunction with this standard.
It has been assumed in the drafting of this document that the execution of its provisions is entrusted to
appropriately qualified and experienced people.
All pressures are gauge pressures unless otherwise stated.
In this European Standard the unit bar is used, due to its universal use in the field of technical gases. It
should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa
5 5 2
(1 bar = 10 Pa = 10 N/m ).
NOTE This document requires measurement of material properties, dimensions and pressures. All such
measurements are subject to a degree of uncertainty due to tolerances in measuring equipment, etc. It may be
beneficial to refer to the leaflet “measurement uncertainty leaflet” SP INFO 2000 27 [3].
1 Scope
This document specifies the design, testing and marking requirements for spring loaded pressure relief
valves (PRV), for use in liquefied petroleum gas (LPG) cylinders of water capacity of 0,5 l up to and
including 150 l.
These PRVs can be either an integral part of a cylinder valve (see EN ISO 14245 [4] and EN ISO 15995
[5]) or a separate device.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 549, Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 751-1, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and
hot water - Part 1: Anaerobic jointing compounds
EN 751-2, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and
hot water - Part 2: Non-hardening jointing compounds
EN 751-3, Sealing materials for metallic threaded joints in c
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.