EN 12079-1:2006

Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking

This part of EN 12079 specifies requirements for the design, manufacture and marking of offshore freight and service containers with maximum gross mass not exceeding 25000 kg, intended for repeated use to, from and between offshore installations and ships.
This part of EN 12079 specifies only transport related requirements.
Other parts of the standard are:
EN 12079-2, Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking
EN 12079-3, Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing

Offshore-Container und zugehörige Anschlaggarnituren - Teil 1: Offshore-Container - Auslegung, Herstellung und Kennzeichnung

Conteneurs pour manutention en mer et dispositifs de levage associés - Partie 1: Conteneurs pour manutention en mer - Conception, construction et marquage

Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 1. del: Plavajoče kontejnerske enote - Načrtovanje, izdelava in označevanje

General Information

• Status: Withdrawn
• Publication Date: 25-Apr-2006
• Withdrawal Date: 10-Jul-2018
• ICS: 55.180.10 - General purpose containers
• Technical Committee: CEN/TC 280 - Offshore containers
• Drafting Committee: CEN/TC 280 - Offshore containers
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jul-2018
• Ref Project: SIST EN 12079-1:2007 - Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking

Relations

• Replaces: EN 12079:1999 - Offshore containers - Design, construction, testing, inspection and marking
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10855-1:2018 - Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018)
• Effective Date: 20-Jul-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and markingConteneurs pour manutention en mer et dispositifs de levage associés - Partie 1: Conteneurs pour manutention en mer - Conception, construction et marquageOffshore-Container und zugehörige Anschlaggarnituren - Teil 1: Offshore-Container - Auslegung, Herstellung und KennzeichnungTa slovenski standard je istoveten z:EN 12079-1:2006SIST EN 12079-1:2007en55.180.10General purpose containersICS:SIST EN 12079:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 12079-1:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12079-1April 2006ICS 55.180.10Supersedes EN 12079:1999
English VersionOffshore containers and associated lifting sets - Part 1: Offshorecontainer - Design, manufacture and markingConteneurs pour utilisation en mer et dispositifs de levageassociés - Partie 1: Conception, construction et marquageOffshore-Container und zugehörige Anschlaggarnituren -Teil 1: Offshore-Container - Auslegung, Herstellung undKennzeichnungThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12079-1:2006: E

Certification Requirements for Containers.32 Bibliography.34

1 Scope This part of EN 12079 specifies requirements for the design, manufacture and marking of offshore freight and service containers with maximum gross mass not exceeding 25000 kg, intended for repeated use to, from and between offshore installations and ships.
This part of EN 12079 specifies only transport related requirements. Other parts of the standard are: EN 12079-2, Offshore containers and associated lifting sets - Part 2: Lifting sets – Design, manufacture and marking EN 12079-3, Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders — Fusion welding — Part 1: Steels EN 473, Non destructive testing - Qualification and certification of NDT personnel - General principles EN 571-1, Non destructive testing - Penetrant testing - Part 1: General principles EN 970, Non-destructive examination of fusion welds — Visual examination EN 1289, Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels EN 1290, Non-destructive examination of welds - Magnetic particle examination of welds EN 1291, Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels EN 1435, Non-destructive examination of welds - Radiographic examination of welded joints EN 1712, Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels EN 1714, Non-destructive examination of welds - Ultrasonic examination of welded joints EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature EN 10025-1, Hot rolled products of structural steels - Part 1: General technical delivery conditions EN 10025-2, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels EN 10025-3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
...