EN 12674-4:2015
(Main)Roll containers - Part 4: Performance requirements
Roll containers - Part 4: Performance requirements
This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when tested in accordance with EN 12674-3.
Rollbehälter - Teil 4: Leistungsanforderungen
Diese Europäische Norm legt geeignete Prüfungen und Leistungsstufen für aus allen Werkstoffen hergestellte Rollbehälter und Rollböcke, die für eine Anwendung montiert und für eine Lagerung gestapelt sind, fest, wenn diese nach EN 12674 3 geprüft wurden.
Conteneurs à roulettes - Partie 4: Exigences de performances
La présente Norme européenne spécifie les essais appropriés et les niveaux de performances s’appliquant aux conteneurs à roulettes et aux plateaux roulants constitués de tous matériaux, prêts à l’emploi et empilés pour le stockage, lorsqu’ils sont soumis aux essais conformément à EN 12674-3.
Kontejnerji s kolesi - 4. del: Zahtevane lastnosti
General Information
Relations
Overview
EN 12674-4:2015 is a European Standard developed by CEN, specifying the performance requirements for roll containers and dollies used in goods transportation and storage. It defines the necessary tests and minimum performance levels to ensure safety, reliability, and durability of roll containers assembled from various materials. This standard works in tandem with EN 12674-3, which details the test methods, and complements other parts in the EN 12674 series concerning terminology, design, and safety principles.
This standard addresses both fully assembled roll containers and dollies, covering their behavior under typical load conditions, including stacking during storage and movement. It assumes a nominal safe working load (SWL) of 250 kg, which can be adjusted by agreement between manufacturers and testers.
Key Topics
- Scope and applicability: EN 12674-4 applies to all materials used in manufacturing roll containers and dollies, focusing on the performance levels required to meet operational and safety demands.
- Testing sequence and specimen requirements: Each test is independent; fresh specimens are used to ensure accuracy. Tests include both loaded and unloaded conditions.
- Stability Tests:
- Minimum inclination angles to prevent tipping for both unloaded and loaded conditions.
- Stacking stability for dollies is critical, with tests measuring the safe number of stacked units.
- Strength and Resistance Assessments:
- Diagonal resistance to measure structural integrity.
- Side frame strength and stiffness tests, including deflection limits and inelastic deformation thresholds.
- Castor lateral load resistance ensures wheel durability under transverse forces.
- Load Performance Tests:
- Distributed load on floors, edge impact, and localized edge/end base loading tests evaluate container and dolly robustness under expected working impacts.
- Free fall drop test simulates accidental drops to assess damage resistance.
- Rolling and mechanical handling tests:
- Starting and rolling resistance measurements for usability.
- Stacking and mechanical lifting tests to verify safety during storage and transport by forklifts.
- Optional tests:
- Fatigue and strength of welded joints.
- Tensile resistance of straps and buckles.
Applications
EN 12674-4:2015 is valuable for manufacturers, testing bodies, and users involved with roll containers and dollies in industries including:
- Logistics and transportation: Ensuring containers meet performance standards for safe handling and movement of goods.
- Warehousing and storage: Verifying stacking safety and load resistance to optimize space and prevent accidents.
- Retail and distribution: Facilitating smooth goods transfer with reliable container performance.
- Manufacturing and quality control: Guiding design and material selections for durable, safe roll containers.
- Regulatory compliance: Assisting national standards bodies in harmonizing safety and performance regulations across Europe.
Related Standards
EN 12674-4:2015 is part of a comprehensive roll container standard series:
- EN 12674-1:1999 – Roll containers - Part 1: Terminology: Defines terms and concepts used across the series.
- EN 12674-2:2001 – Roll containers - Part 2: General design and safety principles: Covers design requirements ensuring operational safety.
- EN 12674-3:2004 – Roll containers - Part 3: Test methods: Provides detailed procedures for conducting the performance tests described in this document.
Together, these standards provide a holistic framework to design, assess, and use roll containers and dollies in a safe, standardized manner.
Keywords: EN 12674-4:2015, roll containers, dollies, performance requirements, stability tests, strength tests, CEN standard, safe working load, stacking test, transportation safety, goods handling, European standards, packaging equipment, testing methods.
Frequently Asked Questions
EN 12674-4:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Roll containers - Part 4: Performance requirements". This standard covers: This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when tested in accordance with EN 12674-3.
This European Standard specifies appropriate tests and levels of performance for roll containers and dollies manufactured in all materials, assembled for use and stacked for storage when tested in accordance with EN 12674-3.
EN 12674-4:2015 is classified under the following ICS (International Classification for Standards) categories: 55.180.10 - General purpose containers. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12674-4:2015 has the following relationships with other standards: It is inter standard links to EN 12674-4:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 12674-4:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontejnerji s kolesi - 4. del: Zahtevane lastnostiRollbehälter - Teil 4: LeistungsanforderungenConteneurs à roulettes - Partie 4: Exigences de performancesRoll containers - Part 4: Performance requirements55.180.10General purpose containersICS:Ta slovenski standard je istoveten z:EN 12674-4:2015SIST EN 12674-4:2015en,fr,de01-julij-2015SIST EN 12674-4:2015SLOVENSKI
STANDARDSIST EN 12674-4:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12674-4
April 2015 ICS 55.180.10 Supersedes EN 12674-4:2006English Version
Roll containers - Part 4: Performance requirements
Conteneurs à roulettes - Partie 4: Exigences de performances
Rollbehälter - Teil 4: Leistungsanforderungen This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12674-4:2015 ESIST EN 12674-4:2015
...
SIST EN 12674-4:2015 문서는 롤 컨테이너의 성능 요구사항에 대한 유럽 표준으로, 다양한 재질로 제작된 롤 컨테이너 및 돌리가 사용 및 보관을 위해 조립되고 적재될 때의 적합한 테스트와 성능 수준을 규정합니다. 이 표준은 EN 12674-3에 따라 시험할 때 적용되는 테스트 방식과 성능 기준을 명시하고 있습니다. 이 표준의 강점 중 하나는 롤 컨테이너의 내구성과 안전성을 보장하는 데 필요한 구체적인 성능 테스트를 제공한다는 점입니다. 이러한 성능 요구사항은 물류 및 운송 산업에 필수적인 요소로, 사용자와 제조업체 모두에게 높은 신뢰도를 제공합니다. 이를 통해 제품의 품질을 보장하고, 고객의 요구사항을 충족하는 데 기여합니다. 또한, SIST EN 12674-4:2015는 다양한 재질로 제조된 롤 컨테이너에 대한 공통된 기준을 마련함으로써, 제조업체들이 국제적으로 일관된 품질을 유지할 수 있도록 지원합니다. 이러한 일관성은 제품 간의 비교를 용이하게 하고, 소비자에게 보다 신뢰할 수 있는 선택지를 제공합니다. 이 표준의 적합성은 글로벌 물류 체계에 필수적이며, 특히 유럽 시장에서의 적합성을 증대시킵니다. 따라서 SIST EN 12674-4:2015는 롤 컨테이너와 관련된 성능 기준을 이해하고 적용하려는 모든 이해관계자에게 중요한 문서입니다.
The EN 12674-4:2015 standard is a significant document in the realm of roll containers, specifically focusing on the performance requirements for these essential storage and transportation units. Its primary scope is to define appropriate tests and performance levels for roll containers and dollies, irrespective of the materials used in their construction, which is a notable strength as it encompasses a wide range of manufacturing processes. The standard provides a robust framework for ensuring that roll containers and dollies are fit for purpose, as it outlines specific testing methods derived from EN 12674-3. This systematic approach ensures consistency and reliability across the various types of roll containers, thereby enhancing user confidence in their performance during everyday operations. One of the strengths of the EN 12674-4:2015 standard is its comprehensive nature, specifying not only the physical tests that need to be conducted but also setting clear performance requirements that manufacturers must meet. This level of detail supports manufacturers in meeting industry expectations and ensures that the roll containers are suitable for safe and efficient handling and storage. Additionally, by addressing performance requirements for roll containers, the standard serves as a relevant guideline for companies involved in logistics and warehousing, where these containers are fundamental to operational efficiency. The emphasis on safety and durability in the performance criteria is critical for minimizing accidents and ensuring product integrity during transportation and storage. In summary, the EN 12674-4:2015 standard presents a well-defined set of performance requirements for roll containers and dollies, emphasizing the importance of standardized testing to achieve safety and reliability. Its broad applicability across various materials and construction methods enhances its relevance in modern logistics and storage practices, making it a vital document for industry stakeholders.
EN 12674-4:2015は、ロールコンテナおよびドーリーの性能要件に関する非常に重要な規格です。この標準は、製造されるロールコンテナおよびドーリーのテスト方法と性能レベルを明確に定義しており、材料に関係なく、使用のために組み立てられ、保管時に積み重ねられる際に適用されます。このことから、EN 12674-4:2015は非常に広範な適用範囲を持つことがわかります。 この標準の強みは、実用的なテスト規準を提供する点にあります。特に、EN 12674-3に従ってテストされる際の明確な手順が設けられているため、使用者は信頼性の高い性能を確保することができます。また、ロールコンテナの耐久性や適合性を評価するための基準が整えられているため、製品の品質向上に寄与します。これにより、ロールコンテナが過酷な運用条件に対応できることが保証され、お客様のニーズに的確に応えることが可能になります。 さらに、EN 12674-4:2015は、物流業界における品質管理と効率性の向上にも直結しています。この標準の遵守により、ユーザーはロールコンテナのパフォーマンスを比較しやすく、最適な選択を行う基盤を得ることができます。これは特に、サプライチェーン全体の効率を最大化する上で非常に重要です。 総じて、EN 12674-4:2015はロールコンテナやドーリーの実用的な性能要件を定めることで、業界の標準化を促進し、製品の信頼性と顧客満足度を向上させる重要な役割を果たしています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...