Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents

This European Standard specifies a method for determining the maximum particle size of fillers in structural bonding agents by the use of a suitable gauge, graduated in micrometres.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Korngrößenanalyse - Teil 2: Prüfverfahren für Füllstoffe für Polymerklebstoffe

Diese Europa(ische Norm entha(lt Festlegungen fu(r ein Verfahren zur Bestimmung der Ho(chstkorngro(ße von Fu(llstoffen in Klebstoffen fu(r konstruktive Zwecke mit Hilfe eines geeigneten Meßgera(ts mit Mikrometerteilung.

Produits et systèmes pour la protection et la réparation des structures en béton - Analyse granulométrique - Partie 2: Méthode d'essai pour les charges de produits de collages structuraux à base de polymères

La présente norme spécifie une méthode de détermination de la dimension maximale des particules constitutives des charges de produits de collages structuraux, ` l'aide d'une jauge adaptée graduée en micromètres.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Granulometrijska analiza - 2. del: Preskusna metoda za polnila za polimerna lepila

General Information

Status
Published
Publication Date
18-May-1999
ICS
83.180 - Adhesives
 
91.080.40 - Concrete structures
Technical Committee
CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
Drafting Committee
CEN/TC 104/SC 8/WG 3 - Bonding
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
18-Jun-2021
Completion Date
14-Apr-2025
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 12192-2:2000 - Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents

Relations

Parent
EN 12192-1:2002 - Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
Effective Date
22-Dec-2008

Overview

EN 12192-2:1999 is a CEN European Standard titled Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents. It specifies a laboratory method to determine the maximum particle size of fillers used in structural polymer bonding agents by using a suitable gauge graduated in micrometres. The standard supports consistent material characterization for repair and protection systems applied to concrete structures.

Key topics and requirements

  • Scope: Defines the objective of measuring filler maximum particle size in polymer-based structural bonding agents for concrete repair.
  • Measurement principle: Determines maximum particle size using a gauge graduated in micrometres (granulometry analysis).
  • Material focus: Applies specifically to fillers for polymer bonding agents used in bonding and repair products for concrete structures.
  • Regulatory context: Published as a European standard by CEN and adopted by national bodies (example: SIST EN 12192-2:2000 in Slovenia).
  • Classification and indexing: Associated with ICS codes for concrete structures (91.080.40) and adhesives (83.180), highlighting its relevance to both fields.

Note: The standard prescribes the use of an appropriate micrometre-graduated gauge to establish maximum particle dimensions; it does not prescribe filler chemistry or performance criteria beyond granulometry.

Applications and who uses it

EN 12192-2:1999 is practical for professionals involved in the specification, manufacture, testing and application of concrete repair systems:

  • Manufacturers of polymer bonding agents and fillers - for quality control and formulation verification.
  • Independent testing laboratories - to provide repeatable granulometry results for product approval and certification.
  • Specifiers and engineers - to verify that filler particle size is compatible with structural bonding performance and application methods.
  • Contractors and applicators - to select products suitable for surface preparation, workability and penetration on concrete substrates.
  • Standards bodies and certification agencies - for harmonized test procedures across Europe.

Benefits include improved material consistency, predictable application behavior, and support for compliance with European repair-product specifications.

Related standards

  • Other parts of the EN 12192 series on granulometry analysis and concrete repair products.
  • Relevant CEN/ISO standards covering adhesives, concrete repair materials, and particle-size measurement methodologies (consult national listings for exact references).

Keywords: EN 12192-2:1999, granulometry analysis, test method, fillers for polymer bonding agents, maximum particle size, micrometres, concrete repair, CEN, adhesives.

Frequently Asked Questions

EN 12192-2:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents". This standard covers: This European Standard specifies a method for determining the maximum particle size of fillers in structural bonding agents by the use of a suitable gauge, graduated in micrometres.

This European Standard specifies a method for determining the maximum particle size of fillers in structural bonding agents by the use of a suitable gauge, graduated in micrometres.

EN 12192-2:1999 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives; 91.080.40 - Concrete structures. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 12192-2:1999 has the following relationships with other standards: It is excused to EN 12192-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 12192-2:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase EN 12192-2:1999 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Korngrößenanalyse - Teil 2: Prüfverfahren für Füllstoffe für PolymerklebstoffeProduits et systemes pour la protection et la réparation des structures en béton - Analyse granulométrique - Partie 2: Méthode d'essai pour les charges de produits de collages structuraux a base de polymeresProducts and systems for the protection and repair of concrete structures - Granulom
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...