EN ISO 10133:2012

Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

ISO 10133:2012 establishes the requirements for the design, construction and installation of extra-low-voltage direct current (d.c.) electrical systems which operate at nominal potentials of 50 V d.c. or less on small craft of hull length up to 24 m. Conductors that are part of an outboard engine assembly and that do not extend beyond the outboard engine manufacturer's supplied cowling are not included.
Additional information to be included in the owner's manual is listed in an annex.

Kleine Wasserfahrzeuge - Elektrische Systeme - Kleinspannungs-Gleichstrom-(DC-)Anlagen (ISO 10133:2012)

Diese Internationale Norm legt die Anforderungen für die Auslegung, die Herstellung und die Installation von elektrischen Kleinspannungs-Gleichstrom-(DC)-Anlagen fest, die mit Nennpotenzialen von bis zu 50 V Gleichspannung auf kleinen Wasserfahrzeugen bis 24 m Rumpflänge arbeiten. Leiter, die Teile eines Außenbordmotors sind und die sich nicht über die vom Hersteller mitgelieferte Schutzhaube hinaus erstrecken, sind nicht eingeschlossen.
Zusätzliche Informationen, die im Handbuch für Schiffsführer enthalten sein müssen, sind in Anhang B aufgelistet.

Petits navires - Systèmes électriques - Installations à très basse tension à courant continu (ISO 10133:2012)

L'ISO 10133:2012 établit les exigences de conception, de construction et d'installation des circuits électriques en courant continu (CC) à très basse tension fonctionnant sous des tensions nominales inférieures ou égales à 50 V en courant continu sur les petits navires de longueur de coque inférieure ou égale à 24 m. Les conducteurs faisant partie de l'ensemble d'un moteur hors-bord et qui ne s'étendent pas au-delà du capotage du moteur hors-bord fourni par le constructeur ne sont pas couverts.
Elle fournit les instructions supplémentaires à inclure dans le manuel du propriétaire.

Mala plovila - Električni sistemi - Inštalacije, napajane z enosmerno malo napetostjo (ISO 10133:2012)

Ta mednarodni standard določa zahteve za načrtovanje, izdelavo in namestitev električnih sistemov, napajanih z enosmerno malo napetostjo, ki delujejo pri nazivni enosmerni napetosti 50 V ali manj na malih plovilih z dolžino trupa do 24 m. Vključeni niso vodniki, ki so del sestave izvenkrmnega motorja in ne segajo prek pokrova, ki ga je dobavil proizvajalec izvenkrmnega motorja. Dodatne informacije, ki morajo biti vključene v navodila za uporabo, so navedene v dodatku B.

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2012
• Withdrawal Date: 01-Aug-2017
• ICS: 47.020.60 - Electrical equipment of ships and of marine structures
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 02-Aug-2017
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: SIST EN ISO 10133:2013 - Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

Relations

• Replaces: EN ISO 10133:2000 - Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2000)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10133:2017 - Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10133:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 10133:2001
0DODSORYLOD(OHNWULþQLVLVWHPL,QãWDODFLMHQDSDMDQH]HQRVPHUQRPDOR
QDSHWRVWMR,62
Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)
Kleine Wasserfahrzeuge - Elektrische Systeme - Kleinspannungs-Gleichstrom-(DC-)
Anlagen (ISO 10133:2012)
Petits navires - Systemes électriques - Installations a tres basse tension a courant
continu (ISO 10133:2012)
Ta slovenski standard je istoveten z: EN ISO 10133:2012
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
SIST EN ISO 10133:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10133:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10133:2013


EUROPEAN STANDARD
EN ISO 10133

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 47.080 Supersedes EN ISO 10133:2000
English Version
Small craft - Electrical systems - Extra-low-voltage d.c.
installations (ISO 10133:2012)
Petits navires - Systèmes électriques - Installations à très Kleine Wasserfahrzeuge - Elektrische Systeme -
basse tension à courant continu (ISO 10133:2012) Kleinspannungs-Gleichstrom-(DC-)Anlagen (ISO
10133:2012)
This European Standard was approved by CEN on 14 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10133:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10133:2013
EN ISO 10133:2012 (E)
Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC as amended by Directive 2003/44/EC . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10133:2013
EN ISO 10133:2012 (E)
Foreword
This document (EN ISO 10133:2012) has been prepared by Technical Committee ISO/TC 188 "Small craft".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10133:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10133:2
...