iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14141:2003

(Main)

Valves for natural gas transportation in pipelines - Performance requirements and tests

Valves for natural gas transportation in pipelines - Performance requirements and tests

Valves for gas transportation in pipelines according to EN 1594.

Armaturen für den Transport von Erdgas in Fernleitungen - Anforderungen an die Gebrauchstauglichkeit und deren Prüfung

1 Anwendungsbereich
Diese Norm gilt für Armaturen (Kegelhähne, Kugelhähne, Schieber und Rückschlagklappen) in Onshore-Fernleitungen für den Transport von Erdgas nach EN 1594. Sie umfasst alle Armaturen, die Bestandteil der Fernleitung sind.
Regelarmaturen, Sicherheitsventile und alle Armaturen £ DN 50 sind aus dem Anwendungsbereich ausgeschlossen.
Diese Norm legt die Anforderungen und die entsprechenden Prüfungen fest, die bei der Fertigung und für die
Zertifizierung durchgeführt werden, um nachzuweisen, dass die Armaturen die Anforderungen erfüllen.
Neben dieser Europäischen Norm gilt die Internationale Norm ISO 14313. Sofern nichts anderes angegeben ist, müssen alle Anforderungen der vorliegenden Norm erfüllt werden. Mit einem Punkt [·] gekennzeichnete Absätze enthalten Anforderungen, die mit ISO 14313 identisch sind. Bei Widersprüchen zwischen der Europäischen Norm und der Internationalen Norm gilt die Europäische Norm.
Zusätzliche nationale Anforderungen und Prüfungen auf Grund noch nicht harmonisierter einzelstaatlicher gesetz-
licher Regelungen können erforderlich werden und sind bei der Bestellung anzugeben.

Robinetterie pour le transport de gaz naturel par des pipelines - Exigences de performance et essais

La présente Norme s'applique à tous les appareils de robinetterie (robinets à tournant conique, robinets à tournant sphérique, robinets-vannes et clapets de non retour) utilisés dans des pipelines terrestres de transport du gaz naturel conformément à l'EN 1594. Elle comprend tous les appareils de robinetterie faisant partie intégrante du pipeline.
La présente Norme européenne s'applique aux appareils de robinetterie pour pipelines dont la pression maximale de service est supérieure à 16 bar.
Sont exclus du domaine d'application les robinets de régulation, les soupapes de sûreté et tous les appareils de robinetterie £ DN 50.
La présente Norme établit les spécifications en matière d'exigences et d'essais de vérification appropriés réalisés en cours de production et à des fins de certification afin de démontrer que les appareils de robinetterie sont conformes aux exigences. Un récapitulatif des essais sur produit et des essais de type est donné en annexe H.
La présente Norme européenne fait référence à l'ISO 14313:1999 . Sauf spécification contraire, il convient de satisfaire à toutes les exigences de cette norme. Les paragraphes marqués du symbole [·] contiennent des exigences identiques aux exigences de l'ISO 14313:1999. En cas de contradiction entre la norme CEN et la norme ISO, la norme CEN prévaut.
Des exigences et essais nationaux supplémentaires conformes à différentes réglementations nationales non encore harmonisées peuvent se révéler nécessaires et doivent être indiqués dans le bon de commande.

Armature za transport zemeljskega plina po cevovodih – Zahteve glede uporabnosti in preskušanje

General Information

Status
Withdrawn
Publication Date
09-Dec-2003
Withdrawal Date
04-Jun-2013
ICS
23.060.01 - Valves in general
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
CEN/TC 69 - Industrial valves
Drafting Committee
CEN/TC 69/WG 9 - Valves for the transport of petroleum and natural gas
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
05-Jun-2013
Completion Date
05-Jun-2013
Ref Project
SIST EN 14141:2004 - Valves for natural gas transportation in pipelines - Performance requirements and tests

Relations

Replaced By
EN 14141:2013 - Valves for natural gas transportation in pipelines - Performance requirements and tests
Effective Date
20-Jun-2009

Buy Standard

EN 14141:2004EN 14141:2004
PreviousNext
Standard
EN 14141:2004
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Armature za transport zemeljskega plina po cevovodih – Zahteve glede uporabnosti in preskušanjeArmaturen für den Transport von Erdgas in Fernleitungen - Anforderungen an die Gebrauchstauglichkeit und deren PrüfungRobinetterie pour le transport de gaz naturel par des pipelines - Exigences de performance et essaisValves for natural gas transportation in pipelines - Performance requirements and tests75.200Petroleum products and natural gas handling equipment23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 14141:2003SIST EN 14141:2004en01-junij-2004SIST EN 14141:2004SLOVENSKI
STANDARD
SIST EN 14141:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
SIST EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682:
1)   - 10 °C to 60 °C;
2)   - 20 °C to 60 °C;
3)   the range stated by the purchaser for special design.
This European Standard comprises all valves which are components of the pipeline.
This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar.
Control valves and safety valves are excluded from the scope of this European Standard.
This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G.
This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942.
Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
SIST EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682:
1)   - 10 °C to 60 °C;
2)   - 20 °C to 60 °C;
3)   the range stated by the purchaser for special design.
This European Standard comprises all valves which are components of the pipeline.
This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar.
Control valves and safety valves are excluded from the scope of this European Standard.
This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G.
This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942.
Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
SIST EN ISO 14723:2009

ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
SIST EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-5:2024(Main)
Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2024)
kSIST FprEN ISO 19403-5:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids by optical methods. The method can be applied for the characterization of liquid coating materials.
If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16286-1:2024(Main)
Railway applications - Gangway systems between vehicles - Part 1: Main applications
SIST EN 16286-1:2024

This document specifies the technical and safety requirements applicable to gangway systems used in heavy rail and urban rail vehicles that are designed to allow passengers or staff to move between adjacent vehicles.
It also specifies:
- the requirements for the safety for passengers and/or staff in the gangway while the train is running,
- the assessment methods as well as pass/fail criteria for gangways installed on vehicles.
NOTE Some requirements in this document may not be applicable for gangways designed for use by staff only.
This document is not intended to specify requirements for articulation systems which can be an integral part of gangway systems.
This document is not applicable for rubber tube gangways and interconnecting gangways for coaches travelling at speeds of up to 200 km/h on high-speed lines with tunnel sections. Information about these types of gangway systems are given in Annex A and Annex B.

  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21009-2:2024(Main)
Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Operational requirements (ISO 21009-2:2024)
SIST EN ISO 21009-2:2024

This document specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It can also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).
This document applies to vessels designed for cryogenic fluids specified in ISO 21009-1.
Static cryogenic vessels are often partly equipped by the manufacturer, but can be installed or re- installed by another party, such as the operator, user or owner.
NOTE 1        For the installation of these vessels, additional requirements can apply.
NOTE 2        Some requirements of this document can be covered by local regulations, e.g. safety distances, occupational safety and health.
NOTE 3        Additional requirements can apply to the operation of large scale and field-fabricated vessels.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-6:2024(Main)
Paints and varnishes - Wettability - Part 6: Measurement of dynamic advancing and receding angle by changing the volume of a drop (ISO 19403‑6:2024)
kSIST FprEN ISO 19403-6:2024

This document specifies a method to measure the dynamic contact angle with an optical method. The dynamic advancing and the dynamic receding contact angles are determined.
By using the measurement specified in this document, the wetting and dewetting properties can be characterized. The morphological and chemical homogeneity of interfaces can also be determined.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day