EN 12697-30:2012

Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor

This European Standard specifies methods of moulding specimens from bituminous mixtures by impact compaction. Such specimens are primarily used to determine bulk density and other technological characteristics e.g. Marshall stability and flow according to EN 12697-34.
This European Standard applies to bituminous mixtures (both those made up in a laboratory and those resulting from work site sampling), with not more than 15 % by mass retained on the 22,4 mm sieve and none on the 31,5 mm sieve.

Asphalt - Prüfverfahren für Heißasphalt - Teil 30: Probenvorbereitung, Marshall-Verdichtungsgerät

Diese Europäische Norm legt Verfahren zur Herstellung von Probekörpern aus Asphalt mittels Schlag-verdichtung fest. Diese Probekörper werden hauptsächlich zur Bestimmung der Raumdichte und anderer technologischer Kennwerte, wie z. B. der Marshall-Stabilität und des Marshall-Fließwertes nach EN 12697-34, verwendet. Diese Europäische Norm gilt für Asphalt (sowohl im Labor hergestellten als auch auf der Baustelle entnom-menen Asphalt) mit einem Siebrückstand von maximal 15 % (Massenanteil) auf einem 22,4-mm-Sieb sowie ohne Rückstand auf einem 31,5-mm-Sieb.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 30: Confection ď'éprouvettes par compacteur à impact

Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 30. del: Priprava preskušancev z udarnim zgoščevalnikom

Ta evropski standard določa metode ulivanih preskušancev iz bitumenskih zmesi z udarnim zgoščevanjem. Takšni preskušanci se v glavnem uporabljajo za ugotavljanje prostorninske gostote in drugih tehnoloških lastnosti, npr. stabilnosti po Marshallu in pretočnosti v skladu s standardom EN 12697-34. Ta evropski standard se uporablja za bitumenske zmesi (za tiste, izdelane v laboratoriju, in za tiste, ki izhajajo iz vzorčenja na delovišču) s 15 % delcev ali manj, ki ostanejo na situ 22,4 mm, in ne vsebujejo delcev, ki ostanejo na situ 31,5 mm.

General Information

• Status: Withdrawn
• Publication Date: 10-Apr-2012
• Withdrawal Date: 18-Dec-2018
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Dec-2018
• Ref Project: SIST EN 12697-30:2012 - Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor

Relations

• Replaces: EN 12697-30:2004+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor
• Effective Date: 28-May-2011
• Replaced By: EN 12697-30:2018 - Bituminous mixtures - Test methods - Part 30: Specimen preparation by impact compactor
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 30: Probenvorbereitung mit dem Marshall-VerdichtungsgerätBituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-30:2012SIST EN 12697-30:2012en,fr,de01-junij-2012SIST EN 12697-30:2012SLOVENSKI
STANDARDSIST EN 12697-30:2004+A1:20071DGRPHãþD



SIST EN 12697-30:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-30
April 2012 ICS 93.080.20 Supersedes EN 12697-30:2004+A1:2007English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 30: Confection d'éprouvettes par compacteur à impact
Asphalt - Prüfverfahren für Heißasphalt - Teil 30: Probenvorbereitung, Marshall-Verdichtungsgerät This European Standard was approved by CEN on 26 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-30:2012: ESIST EN 12697-30:2012



EN 12697-30:2012 (E) 2 Contents Page Foreword .31 Scope .72 Normative references .73 Terms and definitions .74 Principle .75 Apparatus .75.1 Impact compactor with steel anvil .75.1.1 General .75.1.2 Conditions of installation . 115.2 Impact compactor with wooden pedestal . 125.2.1 General . 125.3 Compaction mould . 125.4 Ovens or hot plates . 135.5 Steel block . 135.6 Shields, baffle plates or sand baths . 135.7 Plate . 136 Shape and dimensions of the specimens .
...