EN 685:2007
(Main)Resilient, textile and laminate floor coverings - Classification
Resilient, textile and laminate floor coverings - Classification
This European Standard establishes a classification system for resilient, textile and laminate floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the European Standard for each type of floor covering.
This European Standard is also intended to give guidance to manufacturers, specifiers and consumers to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
NOTE The wear and appearance of floor coverings are influenced by standards of installation and maintenance, the condition of the sub-floor and the kind of use (type of footwear, high concentrations of localized traffic etc.). These factors should be taken into account when using this classification system.
Elastische, textile und laminat-Bodenbeläge - Klassifizierung
Revêtements de sol résilients textiles et stratifiés - Classification
Netekstilne, tekstilne in laminatne talne obloge - Razvrščanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2007
1DGRPHãþD
SIST EN 685:2005
1HWHNVWLOQHWHNVWLOQHLQODPLQDWQHWDOQHREORJH5D]YUãþDQMH
Resilient, textile and laminate floor coverings - Classification
Elastische, textile und laminat-Bodenbeläge - Klassifizierung
Revetements de sol résilients textiles et stratifiés - Classification
Ta slovenski standard je istoveten z: EN 685:2007
ICS:
59.080.60 Tekstilne talne obloge Textile floor coverings
97.150 Netekstilne talne obloge Non-textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 685
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 59.080.60; 97.150 Supersedes EN 685:2005
English Version
Resilient, textile and laminate floor coverings - Classification
Revêtements de sol résilients textiles et stratifiés - Elastische, textile und laminat-Bodenbeläge -
Classification Klassifizierung
This European Standard was approved by CEN on 26 July 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 685:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
1 Scope .4
2 Explanation of the classification system .4
Annex A (informative) Examples of areas of use.6
Foreword
This document (EN 685:2007) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and
laminate floor coverings”, the secretariat of which is held by BSI.
This document shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by February 2008 and conflicting national standards shall be withdrawn at the latest
by February 2008.
This document supersedes EN 685:2005.
This document has been revised in order to be consistent with the latest version of the graphical symbols that
are defined in CEN/TS 15398:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies a classification system for resilient, textile and laminate floor coverings. The
classification is based on pr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.