Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT (A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical specification

Luft- und Raumfahrt - Verbindungselemente mit Außengewinde aus hochwarmfestem Stahl FE-PA92HT (A286) - Klasse: 900 MPa/650 °C, Herstellverfahren nach Wahl - Technische Lieferbedingungen

Série aérospatiale - Éléments de fixation à filetage extérieur, en acier résistant à chaud FE-PA92HT (A286) - Classification : 900 MPa/650 °C, mode de fabrication non imposé - Spécification technique

Le présent document spécifie les exigences techniques et d’assurance qualité pour les éléments de fixation à filetage extérieur en matériau FE-PA92HT (A286), de classe de résistance à la traction de 900 MPa à température ambiante, température d’essai maximale du matériau de 650 °C.
Les éléments de fixation à filetage extérieur spécifiés ici peuvent être fabriqués à partir de barres par usinage ou par forgeage au choix du fabricant ; en cas de forgeage, le contrôle du fibrage n’est soumis à aucune exigence.
Principalement pour les applications aérospatiales, cette norme s'applique à ces éléments de fixation à filetage extérieur lorsqu'ils sont référencés dans le dessin ou la norme de produit.

Aeronavtika - Vezni elementi z zunanjim navojem iz toplotnoodpornega jekla FE PA92HT (A286) - Klasifikacija: 900 MPa/650 °C, metoda izdelave po izbiri - Tehnična specifikacija

General Information

Status
Not Published
Publication Date
16-Jul-2024
Technical Committee
Drafting Committee
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
13-Apr-2023
Completion Date
13-Apr-2023

Relations

Buy Standard

Draft
prEN 3043:2023
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3043:2023
01-marec-2023
Aeronavtika - Vezni elementi z zunanjim navojem iz toplotnoodpornega jekla FE
PA92HT (A286) - Klasifikacija: 900 MPa/650 °C, metoda izdelave po izbiri -
Tehnična specifikacija
Aerospace series - Fasteners, externally threaded, in heat resisting steel FE PA92HT
(A286) - Classification: 900 MPa/650 °C, manufacturing method optional - Technical
specification
Luft- und Raumfahrt - Verbindungselemente mit Außengewinde aus hochwarmfestem
Stahl FE-PA92HT (A286) - Klasse: 900 MPa/650 °C, Herstellverfahren nach Wahl -
Technische Lieferbedingungen
Série aérospatiale - Élements de fixation, filetés, en acier résistant à chaud FE PA92HT
(A286) - Classification: 900 MPa/650 °C, mode de fabrication non imposé - Spécification
technique
Ta slovenski standard je istoveten z: prEN 3043
ICS:
49.030.01 Vezni elementi na splošno Fasteners in general
oSIST prEN 3043:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3043:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3043:2023


DRAFT
EUROPEAN STANDARD
prEN 3043
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2023
ICS 49.030.01 Will supersede EN 3043:2008
English Version

Aerospace series - Fasteners, externally threaded, in heat
resisting steel FE PA92HT (A286) - Classification: 900
MPa/650 °C, manufacturing method optional - Technical
specification
Série aérospatiale - Élements de fixation, filetés, en Luft- und Raumfahrt - Verbindungselemente mit
acier résistant à chaud FE PA92HT (A286) - Außengewinde aus hochwarmfestem Stahl FE-PA92HT
Classification: 900 MPa/650 °C, mode de fabrication (A286) - Klasse: 900 MPa/650 °C, Herstellverfahren
non imposé - Spécification technique nach Wahl - Technische Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3043:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3043:2023
prEN 3043:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Certification and quality assurance . 6
4.1 Acceptance. 6
4.1.1 Purpose . 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.