EN 13480-1:2017/A1:2019
(Amendment)Metallic industrial piping - Part 1: General
Metallic industrial piping - Part 1: General
This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure.
Introduction of a new Clause 7 "Accessories"
Metallische industrielle Rohrleitungen - Teil 1: Allgemeines
Tuyauteries industrielles métalliques - Partie 1 : Généralités
La présente Norme européenne définit les exigences relatives aux réseaux de tuyauteries industrielles et aux supports, systèmes de sécurité inclus, en matériaux métalliques dans le but d’assurer une exploitation sûre.
La présente Norme européenne est applicable aux tuyauteries métalliques aériennes, en caniveaux ou enterrées, indépendamment de la pression.
La présente Norme européenne ne s’applique pas :
- aux canalisations de transport ni à leurs accessoires ;
- aux réseaux d'eau tels que les conduites forcées, les galeries sous pression, les cheminées d'équilibrage des installations hydroélectriques et aux accessoires spécifiques connexes ;
- aux tuyauteries pour véhicules visés par les procédures de réception CEE telles que définies dans les directives 70/156/CEE [1], 74/150/CEE [2] et 92/61/CEE [3] ;
- aux équipements spécialement conçus pour les applications nucléaires, dont la défaillance peut donner lieu à des émissions radioactives ;
- aux équipements de contrôle de puits utilisés dans l'industrie de prospection et d'exploitation pétrolière, gazière ou géothermique ainsi que dans le stockage souterrain et prévus pour contenir et/ou contrôler la pression du puits, y compris la tuyauterie ;
- aux tuyauteries dans les hauts-fourneaux, y compris leurs systèmes de refroidissement, leurs récupérateurs de vent chaud, leurs extracteurs de poussières et leurs épurateurs de gaz de hauts-fourneaux, dans les fours à réduction directe, y compris leurs systèmes de refroidissement, leurs convertisseurs à gaz, dans les fours sous vide ainsi que dans les cuves destinées à la fusion, à la refusion, au dégazage et à la coulée de l’acier et des métaux non ferreux ;
- aux enveloppes des équipements électriques à haute tension tels que les appareillages de connexion et de commande, les transformateurs et les machines tournantes ;
- aux tuyaux sous pression entourant les éléments de réseaux de transmission, tels que les câbles électriques ou les câbles téléphoniques ;
- aux tuyauteries fixées de manière permanente sur les bateaux, fusées, aéronefs et unités mobiles off-shore ;
- aux tuyauteries internes des dispositifs médicaux tels que définis dans la directive 93/142/CEE [4] relative aux dispositifs médicaux ;
- aux tuyauteries internes des chaudières et aux tuyauteries faisant partie intégrante des récipients sous pression.
Kovinski industrijski cevovodi - 1. del: Splošno - Dopolnilo A1
Ta evropski standard določa zahteve za industrijske cevne sisteme in nosilce, vključno z varnostnimi sistemi, iz kovinskih materialov za zagotavljanje varnega obratovanja.
Ta evropski standard se uporablja za nadzemne kovinske cevi, cevi v kanalih ali vkopane cevi, ne glede na tlak.
Ta evropski standard se ne uporablja za:
– cevovode in povezano dodatno opremo;
– visokopretočne vodne poti, kot so dovodni kanali, tlačni predori, tlačni jaški za hidroelektrične napeljave in z njimi povezane posebne armature;
– cevovode za vozila, ki so zajeti v postopkih EGS-homologacije, kot jih določajo direktive 70/156/EGS [1], 74/150/EGS [2] in 92/61/EGS [3];
– opremo, posebej načrtovano za jedrsko uporabo, pri kateri lahko napaka povzroči oddajanje radioaktivnosti;
– opremo za nadziranje vrtin, ki se uporablja v naftni, plinski ali geotermični raziskovalni in črpalni panogi ter v podzemnih skladiščih, namenjenih zadrževanju in/ali nadziranju tlaka vrtin, vključno s cevovodi;
– cevovode plavžev, vključno s sistemom za hlajenje peči, rekuperatorje vročega zraka, izločevalnike prahu in izparilnike izpušnih plinov plavža ter kupolke za direktno redukcijo, vključno s hlajenjem peči, plinskimi izmenjevalci, vakuumskimi pečmi in lonci za taljenje, pretaljevanje, razplinjevanje ter ulivanje jekla in barvnih kovin;
– ogrodje za visokonapetostno električno opremo, kot so stikalne in kontrolne naprave ter transformatorji;
– tlačne cevovode za vsebovanje sistemov za prenašanje, na primer električne energije, in telefonske kable;
– trajno nameščene cevovode za ladje, rakete, zrakoplove in mobilne enote na vodi;
– notranje cevovode v medicinskih pripomočkih iz Direktive 93/142/EGS [4] o medicinskih pripomočkih;
– notranje cevovode kotlov za gretje in cevi, ki so sestavni del tlačnih posod.
General Information
- Status
- Withdrawn
- Publication Date
- 16-Apr-2019
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 267 - Industrial piping and pipelines
- Drafting Committee
- CEN/TC 267/WG 1 - General
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Jul-2024
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 31-Jul-2024
- Effective Date
- 19-Jul-2017
Frequently Asked Questions
EN 13480-1:2017/A1:2019 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Metallic industrial piping - Part 1: General". This standard covers: This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. Introduction of a new Clause 7 "Accessories"
This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. Introduction of a new Clause 7 "Accessories"
EN 13480-1:2017/A1:2019 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general; 23.040.03 - Pipeline and its parts for external water conveyance systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13480-1:2017/A1:2019 has the following relationships with other standards: It is inter standard links to EN 13480-1:2024, EN 13480-1:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13480-1:2017/A1:2019 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 13480-1:2017/A1:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2019
Kovinski industrijski cevovodi - 1. del: Splošno - Dopolnilo A1
Metallic industrial piping - Part 1: General
Metallische industrielle Rohrleitungen - Teil 1: Allgemeines
Tuyauteries industrielles métalliques - Partie 1: Généralités
Ta slovenski standard je istoveten z: EN 13480-1:2017/A1:2019
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13480-1:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 23.040.01
English Version
Metallic industrial piping - Part 1: General
Tuyauteries industrielles métalliques - Partie 1 : Metallische industrielle Rohrleitungen - Teil 1:
Généralités Allgemeines
This amendment A1 modifies the European Standard EN 13480-1:2017; it was approved by CEN on 17 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-1:2017/A1:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modifications to Clause 2, "Normative references" . 4
2 Modification to 3.1, "Terms and definitions" . 4
3 Addition of a new Clause 7, "Accessories" . 4
SIST EN 13480
...
The EN 13480-1:2017/A1:2019 standard provides essential guidelines for metallic industrial piping, serving as a comprehensive reference for professionals engaged in the design, installation, and maintenance of piping systems. Its scope encompasses a wide range of applications, including above-ground, ducted, and buried piping systems, making it relevant for diverse industries that utilize metallic materials for their operations. One of the significant strengths of this standard lies in its focus on safety and operational integrity of industrial piping systems. By detailing specific requirements for piping and support systems, including safety measures, the standard ensures that all installations meet essential safety protocols. This proactive approach helps mitigate risks associated with pressure and environmental factors, reinforcing the importance of compliance in maintaining operational safety. The recent introduction of Clause 7, which covers "Accessories," is a notable enhancement that broadens the standard's applicability. This new clause recognizes the critical role that accessories, such as valves, fittings, and other components, play in the functionality of piping systems. By integrating guidelines that address these elements, the EN 13480-1 standard ensures a holistic consideration of the entire piping system, promoting coherence and compatibility among all components. Furthermore, the EN 13480-1:2017/A1:2019 standard's relevance extends beyond safety and operational guidelines; it also aligns with broader regulatory and industry standards across Europe. It facilitates adherence to best practices, ensuring that stakeholders, including engineers, inspectors, and site managers, have access to a unified framework that supports quality and efficiency in industrial piping projects. Overall, the EN 13480-1:2017/A1:2019 standard stands as a pivotal document in the field of industrial piping, underscoring its significance in enhancing safety, performance, and regulatory compliance across various applications.
SIST EN 13480-1:2018/A1:2019는 금속 산업 배관에 대한 유럽 표준으로, 주요 내용은 금속 재료로 만들어진 산업 배관 시스템과 지지대에 관한 요구사항을 명확히 정의하고 있습니다. 이 표준은 지상 위, 관로로, 또는 매립된 방식으로 설치된 금속 배관에 적용되며, 압력과 관계없이 안전한 운영을 보장하는 데 중점을 두고 있습니다. 이 표준의 강점은 다양한 환경에서의 사용에 대응할 수 있는 그 폭넓은 적용 가능성에 있습니다. 특히 새로운 조항 7 "부속품"의 도입은 배관 시스템의 안전성과 기능성을 높이는 데 기여하여, 사용자들이 금속 배관의 전반적인 안전성을 확보하는 데 필요한 모든 요소를 포괄하도록 돕습니다. 이러한 변화는 산업 현장의 실제 요구에 잘 부합하며, 사용자들에게 보다 명확한 지침을 제공합니다. 또한, EN 13480-1:2017/A1:2019 표준은 규정의 일관성을 보장하여, 다양한 국가에서 동일한 기준을 준수할 수 있도록 함으로써, 제품의 품질과 신뢰성을 높이는 데 중요한 역할을 합니다. 이는 특히 국제적으로 사업을 운영하는 기업들에게 유리하며, 글로벌 시장에서의 경쟁력 확보에 기여할 수 있습니다. 한편, 이 표준은 금속 배관의 안전성을 보장하기 위한 최신 기술과 사례를 반영하고 있어, 변화하는 산업 환경에 대한 적응성을 갖춘 점에서도 높은 평가를 받을 만합니다. 업계 전문가들이 추천하는 이 표준은 금속 산업 배관 구축 및 운영에 있어 필수적인 기준으로 자리 잡고 있습니다.
標準EN 13480-1:2017/A1:2019は、金属製の産業用配管システムに関する包括的な要件を示しており、その範囲は地下または地上にある金属製配管、またはダクトを含んでいます。この標準は、圧力に関わらず金属材料による配管システムとサポート、さらには安全システムの安全な運用を確保することを目的としています。 この標準の強みは、金属製配管の設計と施工に必要な詳細な指針を提供する点にあります。特に、Clause 7「アクセサリー」の新規導入により、附属品や接続部品に関する具体的な要求事項が明記され、実務における安全性を高めています。この機能により、設計担当者や施工業者が遵守すべき標準化された手順が確立され、全体の品質向上に寄与します。 EN 13480-1:2017/A1:2019は、金属製産業用配管の適用性が高いことから、特に製造業やエネルギー業界においても急速にニーズが高まっています。また、安全性に関するガイドラインが明確なため、法令遵守の面でも大変重要な役割を果たしています。企業はこの標準を参考にすることで、配管システムの設計と運用においてリスクを低減し、信頼性を高めることができます。 このように、EN 13480-1:2017/A1:2019は、金属製産業用配管に関する標準として、その内容が実務に密接に関連し、また進化を続ける技術的要件にも柔軟に対応する構成となっています。これにより、今後の産業界においても非常に重要な基準となるでしょう。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...