iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 161:2011/FprA2

(Amendment)

Automatic shut-off valves for gas burners and gas appliances

Automatic shut-off valves for gas burners and gas appliances

Amendment to update valve requirements as presented in N1352

Automatische Absperrventile für Gasbrenner und Gasgeräte

Robinets automatiques de sectionnement pour brûleurs à gaz et appareils à gaz

Samodejni zaporni ventili za plinske gorilnike in plinske aparate - Dopolnilo A2

General Information

Status
Not Published
ICS
23.060.10 - Globe valves
23.060.40 - Pressure regulators
Technical Committee
CEN/TC 58 - Safety and control devices for burners and appliances burning gaseous or liquid fuels
Drafting Committee
CEN/TC 58/WG 13 - Mechanics
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
09-May-2012
Due Date
14-Mar-2013
Completion Date
09-May-2012
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
Mandate
M/327 - Mandate given to CEN under EC directive 90/396/EEC relating to appliances burning gaseous fuels with a view to revision of Standard EN 521:1998 " Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances"
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
SIST EN 161:2011/kFprA2:2012 - Automatic shut-off valves for gas burners and gas appliances

Relations

Merged Into
EN 161:2011+A2:2012 - Automatic shut-off valves for gas burners and gas appliances
Effective Date
18-Jan-2023
Amends
EN 161:2011 - Automatic shut-off valves for gas burners and gas appliances
Effective Date
02-Jul-2011

Buy Standard

EN 161:2011/kFprA2:2012EN 161:2011/kFprA2:2012
PreviousNext
Draft
EN 161:2011/kFprA2:2012
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2012
Samodejni zaporni ventili za plinske gorilnike in plinske aparate - Dopolnilo A2
Automatic shut-off valves for gas burners and gas appliances
Automatische Absperrventile für Gasbrenner und Gasgeräte
Robinets automatiques de sectionnement pour brûleurs à gaz et appareils à gaz
Ta slovenski standard je istoveten z: EN 161:2011/FprA2
ICS:
23.060.20 Zapirni ventili (kroglasti in Ball and plug valves
pipe)
27.060.20 Plinski gorilniki Gas fuel burners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 161:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA2
February 2012
ICS 23.060.10
English Version
Automatic shut-off valves for gas burners and gas appliances
Robinets automatiques de sectionnement pour brûleurs à Automatische Absperrventile für Gasbrenner und
gaz et appareils à gaz Gasgeräte
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 58.
This draft amendment A2, if approved, will modify the European Standard EN 161:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 161:2011/FprA2:2012: E
worldwide for CEN national Members.

Content
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 161:2011/FprA1(Amendment)
Automatic shut-off valves for gas burners and gas appliances - Special requirements to determine performance level (PL)
SIST EN 161:2011/kprA1:2012

The intention is to add a further Annex to EN 161 regarding a method for the determination of Performance Level (PL): This Annex is only applicable to valves or valve functions which are declared to comply with performance level requirements (PL) according to EN ISO 13849-1:2008, clauses 1, 2, 3, 4.1, 4.2, 4.5, 7, 8, 9, 10, 11, and annexes C.4, E, and F. This Annex specifies a set of additional requirements to EN 161 to determine the probability of dangerous failures per hour for continuous or high demand mode (PFHD) and the performance level (PL) for electromechanical valves or valve functions used in industrial and thermoprocessing applications (e. g. EN 746-2).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 161:2011/FprA1(Amendment)
Automatic shut-off valves for gas burners and gas appliances - Special requirements to determine performance level (PL)
SIST EN 161:2011/kprA1:2012

The intention is to add a further Annex to EN 161 regarding a method for the determination of Performance Level (PL): This Annex is only applicable to valves or valve functions which are declared to comply with performance level requirements (PL) according to EN ISO 13849-1:2008, clauses 1, 2, 3, 4.1, 4.2, 4.5, 7, 8, 9, 10, 11, and annexes C.4, E, and F. This Annex specifies a set of additional requirements to EN 161 to determine the probability of dangerous failures per hour for continuous or high demand mode (PFHD) and the performance level (PL) for electromechanical valves or valve functions used in industrial and thermoprocessing applications (e. g. EN 746-2).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17308:2024(Main)
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
kSIST FprEN 17308:2024

This document specifies two different methods for the quantitative estimation of non-metallic content remaining adhered to the steel wire obtained from the recovery of materials from end-of-life tyres.
The pyrolysis method is considered as the reference method while the hydrostatic method is considered as an in situ method.
This document includes sample collection and the preparation of representative samples based on a sampling plan for the purpose of their characterization.
This document does not apply to the operational performance or fitness for use of the materials which are deemed to be a function of agreements between the manufacturer and the customer.
This document does not apply to address all the safety concerns, if any, associated with its use. This document does not establish appropriate safety and health practices and does not determine the applicability of regulatory limitations prior to its use.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10205:2024(Main)
Cold reduced tinmill products - Blackplate
oSIST prEN 10205:2023

This document specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of electrolytically zinc coated plate, or coils electrolytically coated with either tin (tinplate) or chromium/chromium oxide (ECCS or ECCS-RC).
Blackplate can be a single or double reduced product and is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60 mm.
This document applies to coils in nominal minimum widths of 600 mm.
In addition to this document, the general technical delivery conditions of EN 10021 apply.
NOTE   Standard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18055-1:2024(Main)
Postal services - Harmonized track and trace events - Part 1: Forward flow
SIST-TS CEN/TS 18055-1:2025

The scope of this document is the forward flow of E-Commerce items. Starting point is arrival at a lo-gistic service provider, end point is the final delivery, or at least the attempt to final delivery.
The returns flows, either caused by unsuccessful delivery, "return to sender" or as a service for recipi-ents to send a received shipment back, are not covered by the forward events. To keep this document unambiguous and easy to understand, these return flows are excluded. Return flows may be covered in a separate technical specification.
Not in scope are the logistical flows within the facilities of the producers and sellers of the items. These fall outside the responsibility of the CEN/TC 331 domain.
Excluded as well, are all events necessary for an LSP to track items within its own facilities. It is up to the LSP how to run its business, and internal standards are in place for the management of internal process-es. Internal events are considered to be of no interest to a recipient, with the exception of some of the last mile events which are mentioned later in this document.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17889:2024(Main)
District heating pipes - Factory made flexible pipe systems - Classification, requirements and test methods for bonded or non-bonded system with thermoplastic reinforced service pipes (TRSP)
SIST-TS CEN/TS 17889:2025

This document specifies classification, general requirements and test methods for flexible, factory made, buried district heating pipe systems with thermoplastic reinforced service pipes (TRSP).
The factory made bonded or non-bonded flexible pipe systems, covered by this document, consists of:
-   Thermoplastic reinforced service pipe, which consists of an inner layer made of PE-Xa, a thermoplastic intermediate layer, a reinforcement layer made of para-aramid fibres, an outer thermoplastic layer and a diffusion barrier layer, all with bonded structure;
-   Thermal insulation layer;
-   Casing made of PE.
Depending on the temperature profile, this document is applicable to a maximum operating temperature of 115 °C and maximum operating design pressure up to 1,6 MPa.
The pipe systems are designed for a service life of at least 30 years.
This document does not apply to cover surveillance systems.
NOTE   For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this document.
A guideline for testing the pipe assembly is given in Annex D.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9073-7:2024(Main)
Nonwovens - Test methods - Part 7: Determination of bending length (ISO 9073-7:2024)
kSIST FprEN ISO 9073-7:2024

This document specifies a method for determining the bending length of a nonwoven. A formula is given for calculating the flexural rigidity of the nonwoven material from the bending length. The method is not applicable to combination-type materials (composites or laminates) in which there can be a natural twist.
NOTE            This document describes a test method specific to nonwovens.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16141:2024(Main)
Conservation of cultural heritage - Guidelines for management of environmental conditions - Collection storage facilities: definitions and characteristics of buildings dedicated to the preservation and management of cultural heritage
SIST EN 16141:2025

This document defines the functions and characteristics of collection storage facilities. These can be independent or integrated into cultural institutions. They are dedicated to the preservation, storage, management of, and access to, collections.
NOTE   For the infrastructure and technical equipment of these collection storage facilities, see EN 16893:2018.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4165-016:2024(Main)
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard
kSIST FprEN 4165-016:2023

This document specifies the oval chimneys for accessories for accessories used in the family of rectangular electrical connectors, operating temperature 175 °C continuous.
The connector accessory body corresponding to those oval chimneys is specified in EN 4165-014.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12608-4:2024(Main)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils
SIST EN 12608-4:2025

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day