EN ISO 3452-2:2013
(Main)Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
ISO 3452-2:2013 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. ISO 3452-2:2013 covers the temperature range 10 °C to 50 °C. Additional tests in ISO 3452-5:2008 or ISO 3452-6:2008 may be required outside this range.
On-site control tests and methods are detailed in ISO 3452‑1:2013.
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung von Eindringmitteln (ISO 3452-2:2013)
Dieser Teil von ISO 3452 legt die technischen Anforderungen und die Prüfverfahren für die Musterprüfung und die Chargenprüfung von Eindringmitteln fest. Dieser Teil von ISO 3452 gilt für Prüfungen, die in einem Temperaturbereich von 10 °C bis 50 °C durchgeführt werden. Außerhalb dieses Temperaturbereichs können zusätzliche Prüfungen erforderlich sein, die in den Teilen 5 oder 6 von ISO 3452 beschrieben werden.
Einzelheiten zu den vor Ort anzuwendenden Kontrollprüfungen und Verfahren werden in ISO 3452 1 behandelt.
Essais non destructifs - Examen par ressuage - Partie 2: Essai des produits de ressuage (ISO 3452-2:2013)
L'ISO 3452-2:2013 spécifie les exigences techniques et les modes opératoires d'essai applicables aux produits de ressuage dans le cadre des essais de type et de lot. L'ISO 3452-2:2013 couvre la gamme de température de 10 °C à 50 °C. Des essais supplémentaires en dehors de cette gamme (partie 5 ou 6 de l'ISO 3452) peuvent être requis.
L'ISO 3452-1 détaille les essais et méthodes de contrôle sur site.
Neporušitvene preiskave - Pregled s penetranti - 2. del: Preiskava penetrantskih snovi (ISO 3452-2:2013)
Ta del standarda ISO 3452 določa tehnične zahteve in preskusne postopke za tipsko in serijsko preskušanje penetrantnih snovi. Razpon temperature je od 10 °C do 50 °C in je zajet v tem delu standarda. Dodatne preskuse, opredeljene v 5. in 6. delu standarda ISO 3452, je morda potrebno izvajati izven tega razpona. Kontrolni preizkusi in metode na kraju samem so opisani v standardu ISO 3452-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN ISO 3452-2:2007
Neporušitvene preiskave - Pregled s penetranti - 2. del: Preiskava penetrantskih
snovi (ISO 3452-2:2013)
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO
3452-2:2013)
Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung von Eindringprüfmitteln (ISO
3452-2:2013)
Essais non destructifs - Examen par ressuage - Partie 2: Essai des produits de ressuage
(ISO 3452-2:2013)
Ta slovenski standard je istoveten z: EN ISO 3452-2:2013
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3452-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2013
ICS 19.100 Supersedes EN ISO 3452-2:2006
English Version
Non-destructive testing - Penetrant testing - Part 2: Testing of
penetrant materials (ISO 3452-2:2013)
Essais non destructifs - Examen par ressuage - Partie 2: Zerstörungsfreie Prüfung - Eindringprüfung - Teil 2: Prüfung
Essai des produits de ressuage (ISO 3452-2:2013) von Eindringprüfmitteln (ISO 3452-2:2013)
This European Standard was approved by CEN on 19 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3452-2:2013 E
worldwide for CEN national Members.
Contents
Page
Foreword .3
Foreword
The text of ISO 3452-2:2013 has been prepared by Technical Committee ISO/TC 135 “Non-destructive
testing” of the International Organization for Standardization (ISO) and has been taken over as
is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the
latest by May 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3452-2:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3452-2:2013 has been approved by CEN as EN ISO 3452-2:2013 without any modification.
INTERNATIONAL ISO
STANDARD 3452-2
Third edition
2013-11-15
Non-destructive testing — Penetrant
testing —
Part 2:
Testing of penetrant materials
Essais non destructifs — Examen par ressuage —
Partie 2: Essai des produits de ressuage
Reference number
ISO 3452-2:2013(E)
©
ISO 2013
ISO 3452-2:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 3452-2:2013(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
4.1 Testing products . 2
4.2 Sensitivity levels . 2
5 Testing of penetrant materials. 3
5.1 Personnel . 3
5.2 Testing facilities . 3
5.3 Reporting . 3
5.4 Tests . 4
6 Test methods and requirements . 5
6.1 Appearance . 5
6.2 Penetrant system sensitivity . 6
6.3 Density .12
6.4 Viscosity .12
6.5 Flashpoint .12
6.6 Washability (Method A penetrants) .13
6.7 Fluorescent brightness .13
6.8 UV stability .13
6.9 Thermal stability of fluorescent brightness.14
6.10 Water tolerance .14
6.11 Corrosive properties .14
6.12 Content of sulfur and halogens (for products designated low in sulfur and halogens) .18
6.13 Residue on evaporation/solid content .19
6.14 Penetrant tolerance.19
6.15 Developer performance.19
6.16 Re-dispersability .19
6.17 Density of carrier liquid .20
6.18 Product performance (pressurized containers) .20
6.19 Particle size distribution .20
6.20 Water content .20
7 Packaging and labelling .20
Annex A (normative) Comparison of fluorescent brightness .21
Annex B (informative) Equipment for determination of the visibility of fluorescent indications .23
Bibliography .24
ISO 3452-2:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitut
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.