EN 1252-1:1998/AC:1998
(Corrigendum)Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C
TC - Request for Corrigendum (SIS appeal - Res BT C 101/1998)
Kryo-Behälter - Werkstoffe - Teil 1: Anforderungen an die Zähigkeit bei Temperaturen unter - 80°C
Récipients cryogéniques - Matériaux - Partie 1: Exigences de tenacité pour les températures inférieures à -80°C
Kriogene posode - Materiali - 1. del: Zahteve za žilavost za temperature pod -80 °C - Dopolnilo AC
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kriogene posode - Materiali - 1. del: Zahteve za žilavost za temperature pod -80 °C - Dopolnilo ACKryo-Behälter - Werkstoffe - Teil 1: Anforderungen an die Zähigkeit bei Temperaturen unter - 80°CRécipients cryogéniques - Matériaux - Partie 1: Exigences de tenacité pour les températures inférieures a -80°CCryogenic ves
...
This May Also Interest You
This standard defines a pratical method for determining the heat leak performance of cryogenic vessels. The methods include measurement on both open and closed systems. This standard neither specify the requirement levels for insulation performance nor when the methodology defined is applied. These requirements may be defined in design or operational standards/regulations.
- Standard20 pagesEnglish languagesale 10% offe-Library read for×1 day
This document is applicable to eutectic cooling devices which are intended to be used with insulated transport equipment.
The following applications are covered:
- Eutectic cooling devices with or without compressor/condenser unit intended to be installed into insulated means of transport (e.g. lorries, trailers, swap bodies, other transport equipment and wagons). Charging of the eutectic elements from the liquid to the solid phase can be performed either by a compressor/condenser unit mounted onto the vehicle or by a stationary direct or indirect system. The eutectic cooling devices are equipped, if relevant, with necessary components for the charging, transmission, cooling and/or with temperature control devices. The eutectic elements can be fitted with or without fans;
- Eutectic cooling devices with independent eutectic elements are not covered by this document.
This document specifies the testing methodologies.
This document is only applicable for mono-temperature eutectic cooling devices. This document does not provide any safety requirements.
- Standard28 pagesEnglish languagesale 10% offe-Library read for×1 day
- 13-Jun-2023
- 27.200
- CEN/TC 413
This document defines the activities related to refrigerating systems according to ISO 5149‑1, ISO 5149‑2, ISO 5149‑3 and ISO 5149‑4 and other equivalent standards, such as EN 378‑1, EN 378‑2, EN 378‑3, EN 378‑4 and the associated competence profiles. It also establishes the competence criteria for persons who carry out these activities. Activities concerning electricity are excluded.
NOTE 1 As a refrigerating circuit is considered not to incorporate electrical and electronic systems, activities in this area are not part of this document. National regulations or appropriate International or national standards can be referred to for competence on electrical and electronic systems.
NOTE 2 This document does not apply to persons carrying out work on self‑contained refrigerating systems as defined in ISO 5149‑1 or EN 378‑1, from the initial design of the product to the complete manufacture of the product, provided the process is controlled and the methods used are checked by an organization or individual responsible for the conformance with statutory requirements on health, safety and environment (e.g. energy efficiency).
NOTE 3 This document does not constitute a training programme.
- Standard44 pagesEnglish languagesale 10% offe-Library read for×1 day
- 04-Apr-2023
- 27.080
- 27.200
- CEN/TC 182
This document specifies the terms, definitions, test conditions, test methods and requirements for rating the performance of air conditioners and liquid chilling packages, with electrically driven compressors and with evaporatively cooled condenser when used for space cooling. The evaporatively cooled condenser is cooled by air and by the evaporation of external additional water. This additional external water is fed by a specific water supply circuit or by a water tank.
This document is not applicable to air-to-air and air-to-water air conditioners with a condenser cooled by air and by the evaporation of water condensed on their evaporator.
This document is applicable to units equipped with a water tank or with a continuous water circuit supply that can also operate without water feeding. However, this document only concerns the testing of these units with water feeding.
This document is applicable to factory-made units which can be ducted.
This document is applicable to factory-made units of either fixed capacity or variable capacity by any means.
Packaged units, single split and multisplit systems are covered by this document.
With regard to units consisting of several parts, this document applies only to those designed and supplied as a complete package.
For evaporatively cooled condenser units that can also operate in heating mode, their performance in this mode is determined according to EN 14511:2022 (all parts).
Units used for industrial processes cooling are not within the scope of this document.
This document specifies the conditions for which performance data will be declared for compliance with the Ecodesign Regulation 206/2012 and with the Energy Labelling Regulation 626/2011 of air conditioners with evaporatively cooled condenser in cooling mode.
NOTE All the symbols given in this text can be used regardless of language.
- Standard18 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements, certain functional requirements, and marking of valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems including heat pumps.
This document includes requirements for valves with extension pipes.
This document describes the procedure to be followed when designing valve parts subjected to pressure as well as the criteria to be used in the selection of materials.
This document describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner.
This document applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices.
In addition, this document is applicable to valves with a maximum operating temperature not exceeding 200 °C and a maximum allowable pressure not exceeding 160 bar[1].
[1] 1 bar = 0,1 MPa.
- Standard100 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Nov-2021
- 30-May-2022
- 27.080
- 27.200
- 2014/68/EU
- M/071
- CEN/TC 182
This document specifies classification criteria, test conditions and test procedures for performance testing of packaged refrigerating units for stationary cold room applications. This includes ductless units for cold storage applications at medium temperatures (MT) and low temperatures (LT) in either compact or split designs, fitted with electrically driven compressors, which work according to the vapour compression cycle.
- Standard22 pagesEnglish languagesale 10% offe-Library read for×1 day
- 28-Sep-2021
- 30-Mar-2022
- 27.200
- 2009/125/EC
- M/495
- CEN/TC 44
This document provides technical information for the installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, in particular from class A3, complementing existing standards. The term "refrigerating system" used in this document includes air conditioners and heat pumps.
Refrigerants from toxicity class B are excluded from this scope.
This document includes risk mitigation measures not yet addressed in existing standards for specific refrigerant classes, or not fully reflecting the state of the art, and establishes complementary technical specifications related to the installation of equipment.
The following aspects are considered:
- explosive atmosphere workplace and equipment;
NOTE Further information can be found in Directive 99/92/EC (ATEX Workplace Directive) and Directive 2014/34/EU (ATEX Equipment Directive).
- design and structural specifications for the installation site;
- marking and labelling of equipment parts and installation site;
- good practice for installing equipment, including tools and personal protection;
- risk mitigation methods and related refrigerant charge limits;
- risk assessments;
- competence of personnel;
- safety testing of systems and equipment.
- Technical specification12 pagesEnglish languagesale 10% offe-Library read for×1 day
This document provides technical specifications for the operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, in particular from class A3, complementing existing standards.
Refrigerants from toxicity class B are excluded from this scope.
This document includes risk mitigation measures not yet addressed in existing standards for specific refrigerant classes, or not fully reflecting the state of the art, and establishes complementary technical specifications for the operation, servicing, maintenance, repair and decommissioning.
The following aspects are considered:
- explosive atmosphere workplace and equipment;
NOTE Further information can be found in Directive 99/92/EC (ATEX Workplace Directive) and Directive 2014/34/EU (ATEX Equipment Directive).
- good practice for the operation, servicing, maintenance, repair and decommissioning, including tools and personal protection;
- risk mitigation methods;
- risk assessments;
- competence of personnel;
- health and safety of personnel;
- location of the equipment.
- Technical specification11 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This part of EN 378 specifies the classification and selection criteria applicable to refrigerating systems. These classification and selection criteria are used in parts 2, 3 and 4.
This standard applies:
a) to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b) to secondary cooling or heating systems;
c) to the location of the refrigerating systems;
d) to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity;
Systems using refrigerants other than those listed in Annex E of this European Standard are not covered by this standard.
Annex C specifies how to determine the amount of refrigerant permitted in a given space, which when exceeded, requires additional protective measures to reduce the risk.
Annex E specifies criteria for safety and environmental considerations of different refrigerants used in refrigeration and air conditioning.
This standard is not applicable to refrigerating systems and heat pumps which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system to another refrigerant type, in which case conformity to the relevant clauses of parts 1 to 4 of the standard shall be assessed.
Product family standards dealing with the safety of refrigerating systems takes precedence over horizontal and generic standards covering the same subject.
- Standard76 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Oct-2020
- 29-Apr-2021
- 01.040.27
- 27.080
- 27.200
- CEN/TC 182
This European Standard specifies the requirements for the safety of persons and property, provides guidance for the protection of the environment and establishes procedures for the operation, maintenance and repair of refrigerating systems and the recovery of refrigerants.
The term “refrigerating system” used in this European Standard includes heat pumps.
This Part 3 of the European Standard is applicable to the installation site (plant space and services). It specifies requirements on the site for safety, which may be needed because of, but not directly connected with, the refrigerating system and its ancillary components.
This standard applies:
a) to refrigerating systems, stationary or mobile, of all sizes except to vehicle air conditioning systems covered by a specific product standard e.g. ISO 13043;
b) to secondary cooling or heating systems;
c) to the location of the refrigerating systems;
d) to replaced parts and added components after adoption of this standard if they are not identical in function and in the capacity.
Systems using refrigerants other than those listed in of !EN 378 1:2016+A1:2020", Annex E are not covered by this standard.
This standard does not apply to goods in storage.
This standard is not applicable to refrigerating systems which were manufactured before the date of its publication as a European Standard except for extensions and modifications to the system which were implemented after publication.
This standard is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for existing stationary systems, being transferred to and operated on another site.
This standard also applies in the case of the conversion of a system for another refrigerant type, in which case conformity with the relevant clauses of parts 1 to 4 of the standard shall be assessed.
- Standard25 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Oct-2020
- 29-Apr-2021
- 27.080
- 27.200
- CEN/TC 182
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.