EN 15182-4:2007+A1:2009

Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40

In addition to the requirements given in EN 15182-1, this document applies to hand-held high pressure branchpipes (nozzles) PN 40 with a maximum flow rate of 200 l/min at a reference pressure of 6 bar
(0,6 MPa). It deals with:
-   safety requirements;
-   performance requirements;
-   test methods;
-   classification and designation;
-   operating instructions;
-   marking and maintenance.
This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1:2007.

Strahlrohre für die Brandbekämpfung - Teil 4: Hochdruckstrahlrohre PN 40

Zusätzlich zu den in EN 15182-1 angegebenen Anforderungen gilt dieses Dokument für Hochdruck¬strahl-rohre (Mundstücke) PN 40 mit einer maximalen Durchflussmenge von 200 l/min bei einem Referenzdruck von 6 bar (0,6 MPa). Behandelt werden:
-   Sicherheitsanforderungen;
-   Anforderungen an die Funktion;
-   Prüfverfahren;
-   Klassifizierung und Bezeichnung;
-   Betriebsanleitung;
-   Kennzeichnung und Instandhaltung.
Der vorliegende Teil dieser Europäischen Norm gilt für Strahlrohre nach EN 15182-1:2007, Anhang A.

Lances à main destinées aux services d'incendie et de secours - Partie 4: Lances haute pression PN 40

En complément des prescriptions données dans l’EN 15182-1, le présent document s‘applique aux lances à main haute pression PN 40 de débit maximal 200 l/min à une pression de référence de 6 bar (0,6 MPa). Il traite :
-   des prescriptions de sécurité ;
-   des prescriptions de performance ;
-   des méthodes d’essai ;
-   du classement et de la désignation ;
-   de la notice d’instructions ;
-   du marquage et de l’entretien.
Cette partie de la présente Norme européenne s’applique aux lances définies dans l’Annexe A de l’EN 15182 1:2007.

Gasilski ročniki - 4. del: Visokotlačni ročniki PN 40

Poleg zahtev, podanih v EN 15182-1, ta dokument velja za visokotlačne ročniki (šobe) PN 40 z največjim pretokom 200 l/min pri referenčnem tlaku 6 barov (0.6 MPa). Obravnava: varnostne zahteve, zahteve za zmogljivost, preskusne metode, razvrščanje in imenovanje, navodila za uporabo, označevanje in vzdrževanje. Ta del tega evropskega standarda velja za ročnike, kot so opredeljeni v Prilogi A EN 15182-1:2007.

General Information

• Status: Withdrawn
• Publication Date: 03-Nov-2009
• Withdrawal Date: 13-Aug-2019
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: CEN/TC 192 - Fire service equipment
• Drafting Committee: CEN/TC 192/WG 8 - Hand-held branchpipes for fire service use
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Aug-2019
• Ref Project: SIST EN 15182-4:2007+A1:2010 - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40

Relations

• Merged From: EN 15182-4:2007 - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
• Effective Date: 19-Jan-2023
• Replaced By: EN 15182-4:2019 - Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
• Effective Date: 21-Aug-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Strahlrohre für die Brandbekämpfung - Teil 4: Hochdruckstrahlrohre PN 40Lances à main destinées aux services d'incendie et de secours - Partie 4: Lances haute pression PN 40Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 4013.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 15182-4:2007+A1:2009SIST EN 15182-4:2007+A1:2010en,fr,de01-januar-2010SIST EN 15182-4:2007+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15182-4:2007+A1
November 2009 ICS 13.220.10 Supersedes EN 15182-4:2007English Version
Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
Lances à main destinées aux services d'incendie et de secours - Partie 4: Lances haute pression PN 40
Strahlrohre für die Brandbekämpfung - Teil 4: Hochdruckstrahlrohre PN 40 This European Standard was approved by CEN on 23 December 2006 and includes Amendment 1 approved by CEN on 29 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15182-4:2007+A1:2009: ESIST EN 15182-4:2007+A1:2010

(0,6 MPa). It deals with:  safety requirements;  performance requirements;  test methods;  classification and designation;  operating instructions;  marking and maintenance. This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1:2007. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15182-1:2007, Hand-held branchpipes for fire service use — Part 1: Common requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15182-1:2007 and the following apply. 3.1 high pressure branchpipe branchpipe including a shut-off device and !an adjustable pattern" corresponding to the following definitions NOTE Branchpipe is defined in 3.1 of EN 15182-1:2007. 3.1.1 high pressure branchpipe – type 1 high pressure branchpipe with !adjustable pattern" at variable flow NOTE Changing pattern changes the flow. 3.1.2 high pressure branchpipe – type 2 high pressure branchpipe with !adjustable pattern" at constant flow NOTE Changing pattern does not change the flow. SIST EN 15182-4:2007+A1:2010

3.2.1 narrow spray jet intermediate position between the straight jet and the wide spray jet providing throw as well as protection 3.2.2 wide spray jet jet solely providing protection for the operator(s) 3.3 haptical device single mechanical device engaging detents 4 Requirements 4.1 General The b
...