EN 15182-4:2007

Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40

In addition to the requirements given in EN 15182-1, this document applies to hand-held high pressure branchpipes (nozzles) PN 40 with a maximum flow rate of 200 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with:
   safety requirements;
   performance requirements;
   test methods;
   classification and designation;
   operating instructions;
   marking and maintenance.
This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1:2007.

Strahlrohre für die Brandbekämpfung - Teil 4: Hochdruckstrahlrohre PN 40

4
Zusätzlich zu den in prEN 15182-1 angegebenen Anforderungen gilt dieses Dokument für Hochdruck-strahlrohre
(Düsen) PN 40 mit einer maximalen Durchflussmenge von 200 l/min bei einem Referenzdruck von
6 bar (0,6MPa). Behandelt werden:
.Sicherheitsanforderungen;
.Anforderungen an die Funktion;
.Prüfverfahren;
.Klassifizierung und Bezeichnung;
.Betriebsanleitung;
.Kennzeichnung und Instandhaltung.

Lances à main destinées aux services d'incendie et de secours - Partie 4 : Lances haute pression PN 40

Gasilski ročniki - 4. del: Visokotlačni ročniki PN 40

General Information

• Status: Withdrawn
• Publication Date: 13-Feb-2007
• Withdrawal Date: 03-Nov-2009
• ICS: 13.220.10 - Fire-fighting
• Technical Committee: CEN/TC 192 - Fire service equipment
• Drafting Committee: CEN/TC 192/WG 8 - Hand-held branchpipes for fire service use
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 04-Nov-2009
• Completion Date: 04-Nov-2009
• Ref Project: SIST EN 15182-4:2007 - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40

Relations

• Merged Into: EN 15182-4:2007+A1:2009 - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40Lances a main destinées aux services d'incendie et de secours - Partie 4 : Lances haute pression PN 40Strahlrohre für die Brandbekämpfung - Teil 4: Hochdruckstrahlrohre PN 40Ta slovenski standard je istoveten z:EN 15182-4:2007SIST EN 15182-4:2007en;fr;de13.220.10Gašenje požaraFire-fightingICS:SLOVENSKI
STANDARDSIST EN 15182-4:200701-julij-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15182-4February 2007ICS 13.220.10 English VersionHand-held branchpipes for fire service use - Part 4: Highpressure branchpipes PN 40Lances à main destinées aux services d'incendie et desecours - Partie 4 : Lances haute pression PN 40Strahlrohre für die Brandbekämpfung - Teil 4:Hochdruckstrahlrohre PN 40This European Standard was approved by CEN on 23 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15182-4:2007: E

3.2.1 narrow spray jet intermediate position between the straight jet and the wide spray jet providing throw as well as protection 3.2.2 wide spray jet jet solely providing protection for the operator(s) 3.3 haptical device single mechanical device engaging detents 4 Requirements 4.1 General The branchpipes, covered by this standard, shall comply with EN 15182-1. 4.2 Mechanical characteristics 4.2.1 Dimensions and mass The branchpipes (without inlet coupling) shall not exceed the dimensions and masses specified in Table 1.
...