prEN ISO 6410-3

Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO/DIS 6410-3:2020)

MINOR REVISION

Technische Zeichnungen - Gewinde und Gewindeteile - Teil 3: Vereinfachte Darstellung (ISO/FDIS 6410 3:2020)

Dieses Dokument legt Regeln für die vereinfachte Darstellung von Gewindeteilen fest, mit Ausnahme von Gewindeeinsätzen, die in ISO 6410 2 beschrieben sind. Diese Darstellung sollte angewendet werden, wenn es nicht notwendig ist, die genaue Form und Einzelheiten des Teiles (siehe ISO 6410 1), z. B. in Zusammenbauzeichnungen, darzustellen.

Dessins techniques - Filetages et pièces filetées - Partie 3: Représentation simplifiée (ISO/DIS 6410-3:2020)

Tehniške risbe - Navoji in deli z navojem - 3. del: Poenostavljeno prikazovanje (ISO/FDIS 6410-3:2020)

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO 6410-3:2021
01-januar-2021
Tehniške risbe - Navoji in deli z navojem - 3. del: Poenostavljeno prikazovanje
(ISO/FDIS 6410-3:2020)
Technical drawings - Screw threads and threaded parts - Part 3: Simplified
representation (ISO/FDIS 6410-3:2020)

Technische Zeichnungen - Gewinde und Gewindeteile - Teil 3: Vereinfachte Darstellung

(ISO/FDIS 6410-3:2020)

Dessins techniques - Filetages et pièces filetées - Partie 3: Représentation simplifiée

(ISO/FDIS 6410-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 6410-3
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
21.040.01 Navoji na splošno Screw threads in general
oSIST prEN ISO 6410-3:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 6410-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO 6410-3:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 6410-3
ISO/TC 10/SC 6
Technical drawings — Screw threads
Secretariat: SAC
and threaded parts —
Voting begins on:
2020-11-18
Part 3:
Voting terminates on:
Simplified representation
2021-02-10
Dessins techniques — Filetages et pièces filetées —
Partie 3: Représentation simplifiée
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 6410-3:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Simplified representation ........................................................................................................................................................................... 1

4.1 General ........................................................................................................................................................................................................... 1

4.2 Screws and nuts ..................................................................................................................................................................................... 1

4.3 Small diameter threads .................................................................................................................................................................... 2

Bibliography ................................................................................................................................................................................................................................ 4

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 6410-3:2021
ISO/FDIS 6410-3:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

...