Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002)

ISO 14692-2:2002 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source.
It is applicable to qualification procedures, preferred dimensions, quality programmes, component marking and documentation.
ISO 14692-2:2002 is intended to be read in conjunction with ISO 14692-1.

Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunstoffrohrleitungen (GFK) - Teil 2: Zulassung und Herstellung (ISO 14692-2:2002)

Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre (PRV) - Partie 2: Conformité aux exigences de performance et fabrication (ISO 14692-2:2002)

L'ISO 14692-2:2002 spécifie les exigences relatives à la qualification et la fabrication des canalisations et raccords en PRV afin de permettre l'achat de composants en PRV en provenance d'une source quelconque dont les propriétés sont connues et constantes.
Elle s'applique aux modes opératoires de qualification, aux dimensions préférées, aux programmes qualité, au marquage des composants et à la documentation.
L'ISO 14692-2:2002 est destinée à être lue conjointement avec l'ISO 14692-1.

Industrija za predelavo nafte in zemeljskega plina - S steklenimi vlakni ojačeni polimerni cevovodi (GRP) - 2. del: Kvalificiranje in proizvodnja (ISO 14692-2:2002)

General Information

Status
Withdrawn
Publication Date
14-Dec-2002
Withdrawal Date
12-Sep-2017
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
13-Sep-2017

Relations

Buy Standard

Standard
EN ISO 14692-2:2004
English language
88 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Erdöl- und Erdgasindustrie - Glasfaserverstärkte Kunstoffrohrleitungen (GFK) - Teil 2: Zulassung und Herstellung (ISO 14692-2:2002)Industries du pétrole et du gaz naturel - Canalisations en plastique renforcé de verre (PRV) - Partie 2: Conformité aux exigences de performance et fabrication (ISO 14692-2:2002)Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002)83.140.30Cevi, fitingi in ventili iz polimernih materialovPlastics pipes, fittings and valves75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN ISO 14692-2:2002SIST EN ISO 14692-2:2004en01-maj-2004SIST EN ISO 14692-2:2004SLOVENSKI
STANDARD



SIST EN ISO 14692-2:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14692-2December 2002ICS 75.200; 83.140.30English versionPetroleum and natural gas industries - Glass-reinforced plastics(GRP) piping - Part 2: Qualification and manufacture (ISO14692-2:2002)Industries du pétrole et du gaz naturel - Canalisations enplastique renforcé de verre (PRV) - Partie 2: Conformitéaux exigences de performance et fabrication (ISO 14692-2:2002)This European Standard was approved by CEN on 2 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14692-2:2002 ESIST EN ISO 14692-2:2004



EN ISO 14692-2:2002 (E)2ForewordThis document (EN ISO 14692-2:2002) has been prepared by Technical Committee ISO/TC 67"Materials, equipment and offshore structures for petroleum and natural gas industries" incollaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshorestructures for petroleum and natural gas industries", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by June 2003, and conflicting nationalstandards shall be withdrawn at the latest by June 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.NOTE FROM CMC
The foreword is susceptible to be amended on reception of the Germanlanguage version. The confirmed or amended foreword, and when appropriate, the normativeannex ZA for the references to international publications with their relevant Europeanpublications will be circulated with the German version.Endorsement noticeThe text of ISO 14692-2:2002 has been approved by CEN as EN ISO 14692-2:2002 without anymodifications.SIST EN ISO 14692-2:2004



Reference numberISO 14692-2:2002(E)© ISO 2002
INTERNATIONAL STANDARD ISO14692-2First edition2002-12-15Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping —Part 2: Qualification and manufacture Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 2: Conformité aux exigences de performance et fabrication
SIST EN ISO 14692-2:2004



ISO 14692-2:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.