prEN ISO 14555

Welding - Arc stud welding of metallic materials (ISO/DIS 14555:2024)

ISO 14555:2017 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
ISO 14555:2017 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.
NOTE General quality requirements for fusion welding of metallic materials are given in ISO 3834‑1, ISO 3834‑2, ISO 3834‑3, ISO 3834‑4 and ISO 3834‑5.
ISO 14555:2017 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction (see Annex B). For processing of stud welding, see Annex A.

Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO/DIS 14555:2024)

Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO/DIS 14555:2024)

ISO 14555:2017 couvre le soudage à l'arc des goujons en matériau métallique soumis à des chargements statiques et de fatigue. Elle spécifie les exigences particulières au soudage des goujons qui se rapportent aux connaissances en soudage, aux exigences de qualité, au descriptif de mode opératoire de soudage, à la qualification du descriptif de mode opératoire de soudage, aux épreuves de qualification des opérateurs et au contrôle des soudures de production.
ISO 14555:2017 est approprié lorsqu'il est exigé de démontrer la capacité d'un fabricant à produire des fabrications soudées possédant une qualité spécifiée.
NOTE Les exigences générales de qualité pour le soudage par fusion des matériaux métalliques sont données dans l?ISO 3834‑1, l?ISO 3834‑2, l?ISO 3834‑3, l?ISO 3834‑4 et l?ISO 3834‑5.
ISO 14555:2017 a été préparé dans un esprit d'exhaustivité pour lui permettre d'être utilisé comme référence dans les contrats. Les exigences qui sont données peuvent être adoptées en intégralité ou bien certaines d'entre elles peuvent être supprimées si elles ne sont pas pertinentes par rapport à la construction concernée (voir Annexe B). Pour la mise en ?uvre du soudage des goujons, voir Annexe A

Varjenje - Obločno varjenje čepov iz kovinskih materialov (ISO/DIS 14555:2024)

General Information

• Status: Not Published
• Publication Date: 26-Jan-2026
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 24-Sep-2024
• Completion Date: 24-Sep-2024
• Ref Project: oSIST prEN ISO 14555:2024 - Welding - Arc stud welding of metallic materials (ISO/DIS 14555:2024)

Relations

• Revises: EN ISO 14555:2017 - Welding - Arc stud welding of metallic materials (ISO 14555:2017)
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Varjenje - Obločno varjenje čepov iz kovinskih materialov (ISO/DIS 14555:2024)
Welding - Arc stud welding of metallic materials (ISO/DIS 14555:2024)
Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO/DIS
14555:2024)
Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO/DIS
14555:2024)
Ta slovenski standard je istoveten z: prEN ISO 14555
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 14555
ISO/TC 44/SC 10
Welding — Arc stud welding of
Secretariat: DIN
metallic materials
Voting begins on:
Soudage — Soudage à l'arc des goujons sur les matériaux
2024-07-02
métalliques
Voting terminates on:
ICS: 25.160.10 2024-09-24
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 14555:2024(en)
DRAFT
ISO/DIS 14555:2024(en)
International
Standard
ISO/DIS 14555
ISO/TC 44/SC 10
Welding — Arc stud welding of
Secretariat: DIN
metallic materials
Voting begins on:
Soudage — Soudage à l'arc des goujons sur les matériaux
métalliques
Voting terminates on:
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 14555:2024(en)
ii
ISO/DIS 14555:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms. 4
4.1 Symbols .4
4.2 Abbreviated terms .4
5 Technical review . 5
6 Welding personnel . 5
6.1 Stud-welding operators .5
6.2 Welding coordination .5
7 Equipment . 6
7.1 Production equipment .6
7.2 Description of the equipment .6
7.3 Maintenance .6
8 Production planning . 7
9 Welding procedure specification (WPS) . 7
9.1 General .7
9.2 Information related to the manufacturer .7
9.2.1 Identification of the manufacturer .7
9.2.2 Identification of the WPS .7
9.2.3 Reference to the welding procedure qualification record (WPQR) or other
relevant documents .7
9.3 Information related to the parent material .7
9.3.1 Parent material type .7
9.3.2 Dimensions .7
9.4 Welding process .8
9.5 Joint .8
9.5.1 Joint design .8
9.5.2 Welding position .8
9.5.3 Preparation of parent material surface .8
9.5.4 Jigs and fixtures .8
9.5.5 Support .8
9.6 Studs .8
9.6.1 Designation .8
9.6.2 Handling .8
9.7 Auxiliaries . .8
9.7.1 Ceramic ferrules (if any) .8
9.7.2 Protective gas (if any) .9
9.8 Power source .9
9.9 Movable fixtures .9
9.9.1 Welding gun/lift mechanism.9
9.9.2 Shielding gas system (if used) .9
9.9.3 Stud feeding system (if any) .9
9.10 Welding variables .9
9.11 Thermal conditions .9
9.12 Post-weld heat-treatment .10
9.13 Non-thermal treatment after welding .10
10 Welding procedure qualification . 10
10.1 Principles .10

iii
ISO/DIS 14555:2024(en)
10.2 Qualification by welding procedure tests .10
10.2.1 Application .10
10.2.2 Proof of conformi
...