EN ISO 25178-70:2014

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)

ISO 25178-70:2014 specifies the characteristics of material measures used for the periodic verification and adjustment of areal surface texture measurement instruments.

Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft - Teil 70: Maßverkörperungen (ISO 25178-70:2014)

Dieser Teil von ISO 25178 legt die Merkmale von Maßverkörperungen fest, die für die wiederkehrende Verifikation und Justierung von Messgeräten zur Messung der flächenhaften Oberflächenbeschaffenheit verwendet werden.

Spécification géométrique des produits (GPS) - État de surface: surfacique - Partie 70: Mesures matérialisées (ISO 25178-70:2014)

L'ISO 25178-70:2014 spécifie les caractéristiques des mesures matérialisées utilisées pour la vérification périodique et le réglage des instruments de mesure de l'état de surface surfacique.

Specifikacija geometrijskih veličin izdelka (GPS) - Tekstura površine: ploskovna - 70. del: Meritve materiala (ISO 25178-70:2014)

EN ISO 25178-70 navaja lastnosti standardov fizičnih meritev, uporabljenih za redno preverjanje in prilagajanje instrumentov ploskovne teksture površine.

General Information

• Status: Published
• Publication Date: 18-Feb-2014
• Withdrawal Date: 18-Aug-2014
• ICS: 17.040.20 - Properties of surfaces
• ICS: 17.040.30 - Measuring instruments
• Technical Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Drafting Committee: CEN/TC 290 - Dimensional and geometrical product specification and verification
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Feb-2014
• Completion Date: 19-Feb-2014
• Ref Project: SIST EN ISO 25178-70:2014 - Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND*367HNVWXUDSRYUãLQHSORVNRYQD
GHO0HULWYHPDWHULDOD,62
Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material
measures (ISO 25178-70:2014)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft -
Teil 70: Maßverkörperungen (ISO 25178-70:2014)
Spécification géométrique des produits (GPS) - État de surface: surfacique - Partie 70:
Mesures matérialisées (ISO 25178-70:2014)
Ta slovenski standard je istoveten z: EN ISO 25178-70:2014
ICS:
17.040.20 Lastnosti površin Properties of surfaces
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 25178-70
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2014
ICS 17.040.20
English Version
Geometrical product specification (GPS) - Surface texture: Areal
- Part 70: Material measures (ISO 25178-70:2014)
Spécification géométrique des produits (GPS) - État de Geometrische Produktspezifikation (GPS) -
surface: surfacique - Partie 70: Mesures matérialisées (ISO Oberflächenbeschaffenheit: Flächenhaft - Teil 70:
25178-70:2014) Maßverkörperungen (ISO 25178-70:2014)
This European Standard was approved by CEN on 27 December 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25178-70:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 25178-70:2014) has been prepared by Technical Committee ISO/TC 213
“Dimensional and geometrical product specifications and verification” in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2014, and conflicting national standards shall be withdrawn at
the latest by August 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25178-70:2014 has been approved by CEN as EN ISO 25178-70:2014 without any
modification.
INTERNATIONAL ISO
STANDARD 25178-70
First edition
2014-02-15
Geometrical product specification
(GPS) — Surface texture: Areal —
Part 70:
Material measures
Spécification géométrique des produits (GPS) — État de surface:
surfacique —
Partie 70: Mesures matérialisées
Reference number
ISO 25178-70:2014(E)
©
ISO 2014
ISO 25178-70:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 25178-70:2014(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 2
5 Requirements for the material measures . 2
6 Types of material measures . 3
7 Profile material measures . 4
7.1 Type PPS: Periodic sinusoidal shape . 4
7.2 Type PPT: Periodic triangular shape . 5
7.3 Type PPR: Periodic rectangular shape . 6
7.4 Type PPA: Periodic arcuate shape . 6
7.5 Type PGR: Groove, rectangular . 7
7.6 Type PGC: Groove, circular . 8
7.7 Type PRO: Irregular profile . 9
7.8 Type PCR: Circular irregular profile .10
7.9 Type PRI: Prism .11
7.10 Type PRB: Razor blade .11
7.11 Type PAS: Approximated sinusoidal shape .12
7.12 Type PCS: Contour standard .13
7.13 Type PDG: Double groove .14
8 Areal material measures .15
8.1 Type AGP: Grooves, perpendicular .15
8.2 Type AGC: Grooves, circular . .15
8.3 Type ASP: Hemisphere .16
8.4 Type APS: Plane-sphere .17
8.5 Type ACG: Cross grating .18
8.6 Type ACS: Cross sinusoidal .19
8.7 Type ARS: Radial sinusoidal .19
8.8 Type ASG: Star-shape grooves .20
8.9 Type AIR: Irregular .21
8.10 Type AFL: Flat plane .22
8.11 Type APC: Photochromic pattern . .22
9 Material measure certificate .23
Annex A (normative) Requirements for measurements.24
Annex B (informative) Equivalence table for material measure names .25
Annex C (informative) Evaluation of a spacing measurand on an areal instrument .26
Annex D (informative) Irregular measurement standards .28
Annex E (informative) Relationship to the GPS matrix model .31
Bibliography .33
ISO 25178-70:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was d
...