EN 13523-0:2014

Coil coated metals - Test methods - Part 0: General introduction

EN 13523 specifies test methods for organic coatings on coil coated metals.
This part of EN 13523 specifies the overall scope of all parts of EN 13523, gives definitions common to all parts and describes how sampling and preparation of test panels for most of the individual test methods are to be carried out.

Bandbeschichtete Metalle - Prüfverfahren - Teil 0: Allgemeine Einleitung

EN 13523 legt Prüfverfahren für organische Beschichtungen auf bandbeschichteten Metallen fest.
Dieser Teil von EN 13523 legt den Anwendungsbereich aller Teile von EN 13523 fest und enthält Definitionen, die für alle Teile gelten. Er beschreibt auch, wie Proben zu nehmen sind und Probenplatten für die meisten der angegebenen Prüfverfahren hergestellt werden.

Tôles prélaquées - Méthodes d'essai - Partie 0 : Introduction générale

L’EN 13523 traite des méthodes d’essai des revêtements organiques sur les tôles prélaquées.
La présente partie de l’EN 13523 spécifie le domaine d’application de l’ensemble des parties de l’EN 13523, donne les définitions communes à toutes les parties et décrit comment effectuer l’échantillonnage et la préparation des éprouvettes pour la plupart des méthodes d’essai.

Prevlečene kovine, ki se navijajo - Preskusne metode - 0. del: Splošni uvod in seznam preskusnih metod

Standard EN 13523-0 določa preskusne metode za organske prevleke na prevlečenih kovinah, ki se navijajo. Ta del standarda EN 13523 določa skupni obseg vseh delov standarda EN 13523, podaja definicije, ki so skupne vsem delom, in opisuje, kako je treba izvesti vzorčenje in pripravo testnih panelov za večino posameznih preskusnih metod, ki jih je treba izvesti.

General Information

• Status: Withdrawn
• Publication Date: 17-Jun-2014
• Withdrawal Date: 12-Oct-2021
• ICS: 17.040.20 - Properties of surfaces
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Oct-2021
• Ref Project: SIST EN 13523-0:2014 - Coil coated metals - Test methods - Part 0: General introduction and list of test methods

Relations

• Replaces: EN 13523-0:2001 - Coil coated metals - Test methods - Part 0: General introduction and list of test methods
• Effective Date: 25-Jun-2014
• Replaced By: EN 13523-0:2021 - Coil coated metals - Test methods - Part 0: General introduction
• Effective Date: 25-Dec-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 0: Allgemeine Einleitung und Liste der PrüfverfahrenTôles prélaquées - Méthodes d'essai - Partie 0 : Introduction générale et liste des méthodes d'essaiCoil coated metals - Test methods - Part 0: General introduction and list of test methods25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13523-0:2014SIST EN 13523-0:2014en,fr,de01-september-2014SIST EN 13523-0:2014SLOVENSKI
STANDARDSIST EN 13523-0:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-0
June 2014 ICS 25.220.60 Supersedes EN 13523-0:2001English Version
Coil coated metals - Test methods - Part 0: General introduction Tôles prélaquées - Méthodes d'essai - Partie 0 : Introduction générale
Bandbeschichtete Metalle - Prüfverfahren - Teil 0: Allgemeine Einleitung This European Standard was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-0:2014 ESIST EN 13523-0:2014
...