EN 13523-4:2014

Coil coated metals - Test methods - Part 4: Pencil hardness

This part of EN 13523 describes the procedure to assess the relative hardness of an organic coating on a metallic substrate, by means of pencils of known hardness.
Smooth surfaces will give more accurate results but the method is also applicable for textured surfaces. The more pronounced the texture, the greater the unreliability of results.

Bandbeschichtete Metalle - Prüfverfahren - Teil 4: Bleistifthärte

Dieser Teil von EN 13523 legt das Verfahren zum Bestimmen der relativen Härte einer organischen Beschichtung auf einem metallischen Substrat mit Hilfe von Bleistiften bekannter Härte fest.
Auf glatten Oberflächen werden genauere Ergebnisse erhalten, aber das Verfahren ist auch bei strukturierten Oberflächen anwendbar. Je ausgeprägter die Struktur ist, desto größer ist die Unsicherheit der Ergebnisse.

Tôles prélaquées - Méthodes d'essai - Partie 4: Dureté crayon

La présente partie de l'EN 13523 décrit la méthode de détermination de la dureté relative d'un revêtement organique sur un subjectile métallique, au moyen de crayons de dureté connue.
Les surfaces lisses donnent des résultats plus précis, mais la méthode s’applique également aux surfaces texturées. Plus la texture est prononcée, moins les résultats sont fiables.

Prevlečene kovine, ki se navijajo - Preskusne metode - 4. del: Merjenje trdote s svinčnikom

Standard EN 13523-4 opisuje postopek za ocenjevanje relativne trdote organske prevleke na kovinski podlagi s pomočjo svinčnikov z znano trdoto. Gladke površine sicer kažejo natančnejše rezultate, vendar je metodo mogoče uporabiti tudi pri teksturiranih površinah. Večja izrazitost teksture pomeni večjo nezanesljivost rezultatov.

General Information

• Status: Published
• Publication Date: 29-Jul-2014
• ICS: 17.040.20 - Properties of surfaces
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 25-Sep-2020
• Ref Project: SIST EN 13523-4:2014 - Coil coated metals - Test methods - Part 4: Pencil hardness

Relations

• Replaces: EN 13523-4:2001 - Coil coated metals - Test methods - Part 4: Pencil hardness
• Effective Date: 06-Aug-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VYLQþQLNRPBandbeschichtete Metalle - Prüfverfahren - Teil 4: BleistifthärteTôles prélaquées - Méthodes d'essai - Partie 4 : Dureté crayonCoil coated metals - Test methods - Part 4: Pencil hardness25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13523-4:2014SIST EN 13523-4:2014en,fr,de01-oktober-2014SIST EN 13523-4:2014SLOVENSKI
STANDARDSIST EN 13523-4:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-4
July 2014 ICS 25.220.60 Supersedes EN 13523-4:2001English Version
Coil coated metals - Test methods - Part 4: Pencil hardness
Tôles prélaquées - Méthodes d'essai - Partie 4: Dureté crayon
Bandbeschichtete Metalle - Prüfverfahren - Teil 4: Bleistifthärte This European Standard was approved by CEN on 14 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-4:2014 ESIST EN 13523-4:2014

Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Principle .5 5 Apparatus and materials .5 6 Sampling .6 7 Test panels .6 8 Procedure .6 9 Expression of results .7 10 Precision .7 11 Test report .8 Bibliography .9
...