EN ISO 16106:2006
(Main)Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006)
Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006)
ISO 16106:2006 gives guidance on quality management provisions applicable to the manufacture, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings.
ISO 16106:2006 can only be used in combination with ISO 9001:2000; it is not a stand-alone document.
It does not apply to design type testing, for which reference is made to 6.1.5, 6.5.4 and 6.6.5 of the United Nations Recommendations on the Transport of Dangerous Goods. Model Regulations, fourteenth revised edition.
Verpackung - Verpackungen zur Beförderung gefährlicher Güter - Gefahrgutverpackungen, Großpackmittel (IBC) und Großverpackungen - Leitfaden für die Anwendung der ISO 9001 (ISO 16106:2006)
Diese Internationale Norm bietet eine Anleitung für Qualitätsmanagementvorschriften für die Herstellung, Messung und Überwachung von bauartgeprüften Verpackungen, IBC und Großverpackungen für gefährliche Güter.
Diese Internationale Norm kann nur im Zusammenhang mit der ISO 9001:2000 verwendet werden und ist kein isoliert anzuwendendes Dokument.
Sie ist nicht für die Bauartprüfung anzuwenden, auf die unter 6.1.5, 6.5.4 und 6.6.5 der UN-Empfehlungen [1] verwiesen wird.
Emballage - Emballages de transport pour marchandises dangereuses - Emballages pour marchandises dangereuses, grands récipients vrac (GRV) et grands emballages - Directives pour l'application de l'ISO 9001 (ISO 16106:2006)
L'ISO 16106:2006 propose des lignes directrices concernant les dispositions de management de la qualité applicables à la production, à la mesure et à la surveillance du modèle type approuvé pour les emballages, les grands récipients vrac (GRV) et les grands emballages pour marchandises dangereuses.
L'ISO 16106:2006 ne peut être utilisée que conjointement avec l'ISO 9001:2000 et ne constitue pas une norme «autonome».
Elle ne s'applique pas aux essais de modèle type, au sujet desquels il est fait référence aux paragraphes 6.1.5, 6.5.4 et 6.6.5 des Recommandations des Nations Unies sur le transport des marchandises dangereuses. Règles modèles, quatorzième édition révisée.
Embalaža – Transportna embalaža za nevarne snovi – Embalaža za nevarne snovi, vsebniki IBC in večja embalaža – Smernice za uporabo standarda ISO 9001 (ISO 16106:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2006
(PEDODåD±7UDQVSRUWQDHPEDODåD]DQHYDUQHVQRYL±(PEDODåD]DQHYDUQHVQRYL
YVHEQLNL,%&LQYHþMDHPEDODåD±6PHUQLFH]DXSRUDERVWDQGDUGD,62 ,62
Packaging - Transport packages for dangerous goods - Dangerous goods packagings,
intermediate bulk containers (IBCs) and large packagings - Guidelines for the application
of ISO 9001 (ISO 16106:2006)
Verpackung - Verpackungen zur Beförderung gefährlicher Güter -
Gefahrgutverpackungen, Großpackmittel (IBC) und Großverpackungen - Leitfaden für
die Anwendung der ISO 9001 (ISO 16106:2006)
Emballage - Emballage de transport pour marchandises dangereuses - Emballage pour
marchandises dangereuses, grands récipients vrac (GRV) et grands emballages -
Directives pour l'application de l'ISO 9001 (ISO 16106:2006)
Ta slovenski standard je istoveten z: EN ISO 16106:2006
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
55.180.99 Drugi standardi v zvezi z Other standards related to
distribucijo blaga s prevozom freight distribution of goods
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 16106
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 55.020; 13.300
English Version
Packaging - Transport packages for dangerous goods -
Dangerous goods packagings, intermediate bulk containers
(IBCs) and large packagings - Guidelines for the application of
ISO 9001 (ISO 16106:2006)
Emballage - Emballage de transport pour marchandises Verpackung - Verpackungen zur Beförderung gefährlicher
dangereuses - Emballage pour marchandises Güter - Gefahrgutverpackungen, Großpackmittel (IBC) und
dangereuses, grands récipients vrac (GRV) et grands Großverpackungen - Richtlinien für die Anwendung der ISO
emballages - Directives pour l'application de l'ISO 9001 9001 (ISO 16106:2006)
(ISO 16106:2006)
This European Standard was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16106:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 16106:2006) has been prepared by Technical Committee CEN/TC
261 "Packaging", the secretariat of which is held by AFNOR, in collaboration with Technical
Committee ISO/TC 122 "Packaging".
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2006, and conflicting
national standards shall be withdrawn at the latest by September 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
INTERNATIONAL ISO
STANDARD 16106
First edition
2006-03-01
Packaging — Transport packages for
dangerous goods — Dangerous goods
packagings, intermediate bulk containers
(IBCs) and large packagings —
Guidelines for the application of ISO 9001
Emballage — Emballage de transport pour marchandises
dangereuses — Emballage pour marchandises dangereuses, grands
récipients vrac (GRV) et grands emballages — Directives pour
l'application de l'ISO 9001
Reference number
ISO 16106:2006(E)
©
ISO 2006
ISO 16106:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 16106:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Quality management system . 2
5 Management responsibility . 2
6 Resource management . 2
7 Product realization. 2
7.1 Planning of product realization . 2
7.2 Customer-related processes . 2
7.3 Design and development . 2
7.4 Purchasing . 2
7.5 Production and service provision. 3
7.6 Control of monitoring and measuring devices. 3
8 Measurement, analysis and improvement . 3
8.1 General. 3
8.2 Monitoring and measurement . 3
8.3 Control of nonconforming product. 4
8.4 Analyses of data . 4
8.5 Improvement . 4
Annex A (normative) Packaging specifications. 5
Annex B (normative) IBC specifications. 14
Annex C (normative) Items and elements of verification, controls, monitoring and validation . 19
Annex D (informative) Typical frequencies for the verification of conformity with design and
performance requirements . 24
Bibliography . 27
ISO 16106:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16106 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 261, Packaging, in collaboration with Technical Committee ISO/TC 122, Packaging, Subcommittee
SC 3, Performance requirements and tests for means of packaging, packages and unit loads (as required by
ISO/TC 122), in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
iv © ISO 2006 – All rights reserved
ISO 16106:2006(E)
Introduction
This International Standard gives guidance for the application of the ISO 9000 quality management system to
the manufacture, measuring and monitoring of design type approved dangerous goods packagings,
Intermediate Bulk Containers (IBCs) and large packagings.
[1]
The United Nations Recommendations on the Transport of Dangerous Goods (referred to in this
International Standard as the UN Model Regulations) require the application of a quality assurance
programme for the manufacture and testing of packagings, IBCs and large packagings that satisfies the
competent authority in order to ensure that each manufactured packaging, IBC and large packaging meets the
requirements.
The UN Model Regulations are given legal entity by the provision of a series of international modal
agreements and national legislation for the transport of dangerous goods. These international agreements
include
[2]
⎯ the European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR) ;
[3]
⎯ the Regulations Concerning the International Carriage of Dangerous Goods by Rail (RID) ;
⎯ the International Civil Aviation Organization’s Technical Instructions for the Safe Transport of Dangerous
[4]
Goods by Air ;
[5]
⎯ the International Maritime Dangerous Goods Code (IMDG) .
The application of this International Standard will need to take into account the requirements of these
international agreements and the national legislation for the transport of dangerous goods.
Compliance with this International Standard does not replace the agreement of competent authorities with
quality assurance programmes. In conjunction with ISO 9001, this International Standard specifies a system for
applying quality processes and assurance to the production of dangerous goods packagings, IBCs and large
packagings.
The change in terminology in the ISO 9000 series from “quality assurance programmes” (1987 edition), over
“quality systems” (1994 edition) to “quality management systems” (2000 edition), is not reflected in the UN Model
Regulations and the international agreements referred to in the bibliography of this International Standard. The
former ter
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.