SIST EN 17366:2020
(Main)Waste management - Access control to collection containers - Identification and authorization
Waste management - Access control to collection containers - Identification and authorization
This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of the ISO 14443 series (Parts 1, 2 and 3).
Abfallwirtschaft - Zugriffssteuerung - Identifikation und Autorisierung
Dieses Dokument findet im Rahmen der Abfallverwertungsbranche Anwendung und definiert die Verarbeitung relevanter Informationen zur Lagerung von Müll zwischen Zugangschips und Sammelbehältersystemen.
Dieses Dokument ist nicht zur Verwendung für Behälteridentifikation vorgesehen.
ANMERKUNG Die Behälteridentifikation wird in EN 14803 behandelt.
Dieses Dokument liefert die technische Spezifikation und die Einschränkungen, die zusätzlich zur Normenreihe ISO 14443 (Teile 1, 2 und 3) definiert werden.
Gestion des déchets - Contrôle des accès - Identification et autorisation
Le présent document est utilisé dans le cadre de l'industrie du traitement des déchets et définit le traitement des informations pertinentes pour le dépôt de déchets entre les supports d'accès et les systèmes du conteneur à déchets.
Le présent document n'est pas destiné à être utilisé pour l'identification des conteneurs.
NOTE L'identification des conteneurs est couverte par l'EN 14803.
Le présent document fournit des spécifications techniques et des restrictions complémentaires par rapport à l’ISO/IEC 14443-1, l’ISO/IEC 14443-2 et l’ISO/IEC 14443-3.
Ravnanje z odpadki - Nadzor dostopa do zabojnikov za zbiranje odpadkov - Identifikacija in avtorizacija
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17366:2020
01-september-2020
Ravnanje z odpadki - Nadzor dostopa do zabojnikov za zbiranje odpadkov -
Identifikacija in avtorizacija
Waste management - Access control to collection containers - Identification and
authorization
Abfallwirtschaft - Zugriffssteuerung - Identifikation und Autorisierung
Gestion des déchets - Contrôle des accès - Identification et autorisation
Ta slovenski standard je istoveten z: EN 17366:2020
ICS:
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
SIST EN 17366:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17366:2020
---------------------- Page: 2 ----------------------
SIST EN 17366:2020
EN 17366
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2020
EUROPÄISCHE NORM
ICS 13.030.40
English Version
Waste management - Access control to collection
containers - Identification and authorization
Gestion des déchets - Contrôle des accès aux Abfallwirtschaft - Zugriffssteuerung von
conteneurs à déchets - Identification et autorisation Abfallbehältern - Identifikation und Autorisierung
This European Standard was approved by CEN on 27 April 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17366:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17366:2020
EN 17366:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Frequency . 6
4.3 Type of the access chip . 6
4.4 Unique Identifier (UID) . 6
4.4.1 Generalities . 6
4.4.2 Requirement . 6
4.5 Length of unique number . 7
4.5.1 Generalities . 7
4.5.2 Requirement on unique number . 7
4.6 Information on access chip . 7
4.6.1 Generalities . 7
4.6.2 Requirement on access chip . 7
4.7 Information required to open the collection container . 7
........................ 7
4.8 Reading the unique number .
4.9 Writing to the access chip . 7
4.10 Security . 7
Bibliography . 8
2
---------------------- Page: 4 ----------------------
SIST EN 17366:2020
EN 17366:2020 (E)
European foreword
This document (EN 17366:2020) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 17366:2020
EN 17366:2020 (E)
Introduction
This document takes ISO/IEC 14443-1, ISO/IEC 14443-2 and ISO/IEC 14443-3 as a basis. In the case
th
...
SLOVENSKI STANDARD
oSIST prEN 17366:2019
01-maj-2019
Ravnanje z odpadki - Nadzor dostopa - Identifikacija in avtorizacija
Waste management - Access control - Identification and authorization
Abfallwirtschaft - Zugriffssteuerung - Identifikation und Autorisierung
Ta slovenski standard je istoveten z: prEN 17366
ICS:
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
oSIST prEN 17366:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17366:2019
---------------------- Page: 2 ----------------------
oSIST prEN 17366:2019
DRAFT
EUROPEAN STANDARD
prEN 17366
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2019
ICS 13.030.40
English Version
Waste management - Access control - Identification and
authorization
Abfallwirtschaft - Zugriffssteuerung - Identifikation
und Autorisierung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 183.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17366:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17366:2019
prEN 17366:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Symbols and abbreviations . 5
5 Requirements . 5
5.1 General . 5
5.2 Frequency . 5
5.3 Type of the access chip . 5
5.4 Unique number . 6
5.4.1 Generalities . 6
5.4.2 Requirement . 6
5.5 Length of unique number . 6
5.5.1 Generalities . 6
5.5.2 Requirement on unique number . 6
5.6 Information on access chip . 6
5.6.1 Generalities . 6
5.6.2 Requirement on access chip . 6
5.7 Information required to open the collection container . 6
5.8 Reading the unique number . 6
5.9 Writing to the access chip . 7
5.10 Security . 7
Bibliography . 8
2
---------------------- Page: 4 ----------------------
oSIST prEN 17366:2019
prEN 17366:2019 (E)
European foreword
This document (prEN 17366:2019) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This standard takes ISO 14443 (Parts 1, 2 and 3) as basis. In the case that this standard and the
ISO 14443 (Parts 1, 2 and 3) are in conflict, this standard prevails.
As this standard takes the series of ISO 14443 (Parts 1, 2 and 3) as basis, it is necessary to conform to
these three parts of ISO 14443 to be able to conform to the standard defined in this document.
This document presents the standard for the identification of access chips.
The ISO 14443 series defines two types of access chips: type A and type B. This standard restricts this
choice and defines that the type of access chip to be used is type A.
3
-----------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.