EN 13108-2:2016
(Main)Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)
This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for Very Thin Layers for use on roads, airfields and other trafficked areas. Asphalt Concrete for Very Thin Layers is a bituminous material, of which the composition and the grading of the aggregate is selected for application of the material in very thin layers with a thickness of 20 mm to 30 mm. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.
Asphalt Concrete for Very Thin Layers is used for surface courses.
This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
Asphaltmischgut - Mischgutanforderungen - Teil 2: Asphaltbeton für sehr dünne Schichten (BBTM)
Diese Europäische Norm legt Anforderungen an Mischgüter der Asphaltmischgutgruppe Asphaltbeton für sehr dünne Schichten fest, die für die Verwendung beim Bau von Straßen, Flugplätzen und sonstigen Verkehrsflächen bestimmt sind. Asphaltbeton für sehr dünne Schichten ist ein bitumenhaltiges Material, dessen Zusammensetzung und die Korngrößenverteilung der Gesteinskörnung für die Anwendung des Materials in sehr dünnen Schichten mit einer Dicke von 20 mm bis 30 mm ausgewählt wird. Mischgüter, die Bitumenemulsionen und bitumenhaltige Materialien auf der Basis der Wiederverwertung vor Ort enthalten, werden durch diese Norm nicht abgedeckt.
Asphaltbeton für sehr dünne Schichten wird für Deckschichten verwendet.
Diese Europäische Norm enthält Anforderungen an die Auswahl der Baustoffe. Sie ist in Verbindung mit FprEN 13108-20 und FprEN 13108-21 anzuwenden.
Mélanges bitumineux - Spécifications pour le matériau - Partie 2: Bétons bitumineux très minces (BBTM)
Cette norme européenne donne les spécifications pour les mélanges appartenant à la famille des bétons bitumineux très minces et utilisés pour les routes, les aéroports et autres zones de circulation.
Cette Norme européenne comporte des exigences pour la sélection des divers constituants. Elle est destinée à être utilisée conjointement avec le prEN 13108-20 et le prEN 13108-21.
Bitumenske zmesi - Specifikacije materialov - 2. del: Bitumenski beton za zelo tanke plasti (BBTM)
Ta evropski standard določa zahteve za skupino zmesi bitumenskih betonov v zelo tankih plasteh za uporabo na cestah, letališčih in drugih prometnih površinah.
General Information
Relations
Overview
EN 13108-2:2016 (CEN) defines material specifications for Asphalt Concrete for Very Thin Layers (BBTM) - a bituminous surface-course mixture designed for application in very thin layers of 20 mm to 30 mm. The standard covers selection of constituent materials and performance requirements for mixtures used on roads, airfields and other trafficked areas. It excludes mixtures based on bitumen emulsion and in situ recycling. EN 13108-2:2016 is intended to be read together with EN 13108-20 (Type Testing) and EN 13108-21 (Factory Production Control).
Key topics and technical requirements
EN 13108-2:2016 sets out technical topics and test-based requirements for bituminous mixtures, including:
- Constituent materials
- Binder selection and properties
- Coarse, fine and all-in aggregates; added filler
- Use of reclaimed asphalt and additives
- Mixture composition and grading
- Composition rules, grading characterization and minimum binder content
- Optional sieves for grading assessment
- Performance and properties
- Void content and specimen preparation
- Water sensitivity (durability under moisture)
- Resistance to abrasion by studded tyres
- Mechanical stability and wheel-tracking behaviour
- Low temperature cracking resistance and uniaxial tension tests
- Friction after polishing (skid resistance)
- Coating, homogeneity and reaction to fire
- Resistance to fuel and de-icing fluids (airfield applications)
- Production and conformity
- Specified mixture temperature ranges for laying
- Assessment and Verification of Constancy of Performance (AVCP)
- Identification, documentation and handling of regulated dangerous substances
- Calculations
- Annex A: calculation methods for binder penetration/softening point when reclaimed asphalt is used
The standard references a range of EN test methods (EN 12697 series), aggregate standards (EN 13043) and binder specifications (EN 12591, EN 14023).
Applications and users
Practical applications:
- Thin surface-course overlays and surface treatments where a 20–30 mm asphalt layer is required
- Pavement surfacing on roads, urban streets, airfields and other trafficked areas needing a thin, durable wearing course
Who uses EN 13108-2:2016:
- Pavement engineers and designers specifying surface courses
- Asphalt producers and material suppliers developing BBTM mixes
- Road authorities and contractors responsible for procurement and construction
- Testing laboratories and QA/QC personnel performing conformity and AVCP checks
Related standards
- EN 13108-1, -3 to -9 (other asphalt mix types)
- EN 13108-20 (Type Testing) and EN 13108-21 (Factory Production Control) - designed to be read jointly with EN 13108-2
- EN 12697 series (bituminous mixture test methods)
- EN 13043 (aggregates for bituminous mixtures)
Keywords: EN 13108-2:2016, Asphalt Concrete for Very Thin Layers, BBTM, bituminous mixtures, surface course, thin asphalt layer, CEN, pavement specification.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske zmesi - Specifikacije materialov - 2. del: Bitumenski beton za zelo tanke plasti (BBTM)Asphaltmischgut - Mischgutanforderungen - Teil 2: Asphaltbeton für sehr dünne Schichten (BBTM)Mélanges bitumineux - Spécifications des matériaux - Partie 2: Béton bitumineux très minces (BBTM)Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13108-2:2016SIST EN 13108-2:2016en,fr,de01-november-2016SIST EN 13108-2:2016SLOVENSKI
STANDARDSIST EN 13108-2:2006/AC:2008SIST EN 13108-2:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13108-2
June
t r s x ICS
{ uä r z rä t r Supersedes EN
s u s r zæ tã t r r xEnglish Version
Bituminous mixtures æ Material specifications æ Part
tã Mélanges bitumineux æ Spécifications pour le matériau
Asphaltmischgut æ Mischgutanforderungen æ Teil
tã This European Standard was approved by CEN on
t y February
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u s r zæ tã t r s x ESIST EN 13108-2:2016
Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used . 26 A.1 General . 26 A.2 Calculation of the penetration of the binder of a mixture . 26 A.3 Calculation of the softening point of the binder of a mixture . 26 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No. 305/2011 . 28 ZA.1 Scope and relevant characteristics . 28 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 29 ZA.3 Assignment of AVCP tasks . 30
...
Frequently Asked Questions
EN 13108-2:2016 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM)". This standard covers: This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for Very Thin Layers for use on roads, airfields and other trafficked areas. Asphalt Concrete for Very Thin Layers is a bituminous material, of which the composition and the grading of the aggregate is selected for application of the material in very thin layers with a thickness of 20 mm to 30 mm. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. Asphalt Concrete for Very Thin Layers is used for surface courses. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for Very Thin Layers for use on roads, airfields and other trafficked areas. Asphalt Concrete for Very Thin Layers is a bituminous material, of which the composition and the grading of the aggregate is selected for application of the material in very thin layers with a thickness of 20 mm to 30 mm. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. Asphalt Concrete for Very Thin Layers is used for surface courses. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
EN 13108-2:2016 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13108-2:2016 has the following relationships with other standards: It is inter standard links to EN 13108-2:2006, EN 13108-2:2006/AC:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13108-2:2016 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 13108-2:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...