EN ISO 2160:1998

Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Revision of EN ISO 2160:1995

Mineralölerzeugnisse - Korrosionwirkung auf Kupfer - Kupferstreifenprüfung (ISO 2160:1998)

Produits pétroliers - Action corrosive sur le cuivre - Essai à la lame de cuivre (ISO 2160:1998)

La présente Norme internationale prescrit une méthode d'essai pour la détermination de l'action corrosive des produits pétroliers liquides et de certains solvants sur le cuivre, y compris les produits volatils ayant une tension de vapeur Reid inférieure ou égale à 124 kPa à 37,8 °C. Il est recommandé de tester les produits volatils ayant une tension de vapeur supérieure à 124 kPa à 37,8 °C conformément à l'ISO 6251 (voir l'avertissement ci-dessous), et de tester les huiles isolantes électriques conformément à l'ISO 5662. AVERTISSEMENT -- Certains produits, en particulier l'essence de gaz naturel, peuvent avoir une tension de vapeur significativement supérieure à ce qui est caractéristique de leur classe, même en dessous de 124 kPa à 37,8 °C. Pour cette raison, il faut s'assurer que la bombe contenant un tel produit ne soit pas placée dans le bain thermostatique à 100 °C. De tels échantillons peuvent développer à 100 °C une pression suffisante pour provoquer la rupture de la bombe, et causer des dommages et blessures.

Nafni proizvodi – Korozivnost na baker – Preskus z bakrenim trakom (ISO 2160:1998)

General Information

• Status: Published
• Publication Date: 14-Sep-1998
• ICS: 75.080 - Petroleum products in general
• Technical Committee: CEN/TC 19 - Petroleum products, lubricants and related products
• Drafting Committee: CEN/TC 19 - Petroleum products, lubricants and related products
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-Jul-2008
• Completion Date: 04-Jul-2008
• Ref Project: SIST EN ISO 2160:1999 - Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)

Relations

• Replaces: EN ISO 2160:1995 - Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1985, including Corrigendum 1:1993)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2160:1999
01-november-1999
1DGRPHãþD
SIST EN ISO 2160:1998
Nafni proizvodi – Korozivnost na baker – Preskus z bakrenim trakom (ISO
2160:1998)
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
Mineralölerzeugnisse - Korrosionwirkung auf Kupfer - Kupferstreifenprüfung (ISO
2160:1998)
Produits pétroliers - Action corrosive sur le cuivre - Essai a la lame de cuivre (ISO
2160:1998)
Ta slovenski standard je istoveten z: EN ISO 2160:1998
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 2160:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2160:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 2160:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 2160:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 2160:1999
INTERNATIONAL ISO
STANDARD 2160
Third edition
1998-09-15
Petroleum products — Corrosiveness to
copper — Copper strip test
Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de
cuivre
A
Reference number
ISO 2160:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 2160:1999
ISO 2160:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 2160 was prepared by Technical Committee
ISO/TC 28, Petroleum products and lubricants.
This third edition cancels and replaces the second edition (ISO 2160:1985),
of which it constitutes a technical revision.
Annexes A and B of this International Standard are for information only.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 2160:1999
©
INTERNATIONAL STANDARD  ISO ISO 2160:1998(E)
Petroleum products — Corrosiveness to copper —
Copper strip test
WARNING — The use of this International Standard may involve hazardous materials, operations and
equipment. This International Standard does not purport to address all of the safety problems associated
with its use. It is the responsibility of the user of this International Standard to establish appropriate safety
and health practices and determine the applicability of regulatory limitations prior to use.
1  Scope
This International Standard specifies a method for the determination of the corrosiveness to copper of liquid
petroleum products and certain solvents. Volatile products, having a maximum vapour pressure of 124 kPa at
37,8 °C are included.
Volatile products with a vapour pressure above 124 kPa at 37,8 °C should be tested according to ISO 6251 (see
caution below). Electrical insulating oils should be tested according to ISO 5662.
CAUTION — Some products, particularly natural gasolines, may have a significantly higher vapour
pressure than is characteristic for their class, even if below 124 kPa at 37,8 °C. For this reason, extreme
caution should be exercised to ensure that the pressure vessel containing such material is not placed in a
bath at 100 °C. Such samples may develop sufficient pressure at 100 °C to rupture the pressure vessel and
cause damage and/or injury.
2  Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject to
revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain
registers of currently valid International Standards.
ISO 3170:1988, Petroleum l
...