CEN/TS 19100-3:2021
(Main)Design of glass structures - Part 3: Design of in-plane loaded glass components and their mechanical joints
Design of glass structures - Part 3: Design of in-plane loaded glass components and their mechanical joints
1.1 Scope of CEN/TS 19100 3
(1) This document gives design rules for mechanically supported glass components primarily subjected to in-plane loading. It also covers construction rules for mechanical joints for in-plane loaded glass components.
NOTE In-plane loaded glass elements are primarily subjected to in-plane loads, e.g. transferred from adjacent parts of a structure. They can also be subjected to out-of-plane loading.
1.2 Assumptions
(1) The assumptions of EN 1990 apply to this document.
(2) This document is intended to be used in conjunction with EN 1990, EN 1991 (all parts), EN 1993-1-1, EN 1995 1 1, EN 1998 1, EN 1999 1 1 and EN 12488.
Bemessung und Konstruktion von Tragwerken aus Glas - Teil 3: In Scheibenebene belastete Bauteile und mechanische Verbindungen
Conception et calcul des structures en verre - Partie 3 : Conception et calcul des composants en verre chargés dans leur plan et de leurs assemblages
1.1 Domaine d’application de la CEN/TS 19100 3
(1) Le présent document énonce les règles de calcul pour les composants en verre maintenus mécaniquement, soumis principalement à une charge dans leur plan. Il couvre également les règles de construction relatives aux assemblages pour composants en verre chargés dans leur plan.
NOTE Les éléments en verre chargés dans leur plan sont principalement soumis à des charges qui sont, par exemple, transmises par les parties adjacentes d’une structure. Ils peuvent également être soumis à une charge perpendiculaire.
1.2 Hypothèses
(1) Les hypothèses énoncées dans l’EN 1990 s’appliquent au présent document.
(2) Le présent document est destiné à être utilisé conjointement avec l’EN 1990, l’EN 1991 (toutes les parties), l’EN 1993-1-1, l’EN 1995 1 1, l’EN 1998 1, l’EN 1999 1 1 et l’EN 12488.
Projektiranje steklenih konstrukcij - 3. del: Projektiranje steklenih elementov pod vplivom obtežb, ki delujejo v ravnini elementov in njihovih mehanskih spojev
1.1
(1) Ta dokument določa pravila za projektiranje mehansko podprtih steklenih elementov, ki so predvsem izpostavljeni obtežbam, ki delujejo v ravnini elementov. Zajema tudi konstrukcijska pravila za mehanske spoje steklenih elementov pod vplivom obtežb, ki delujejo v ravnini elementov.
OPOMBA: Stekleni elementi pod vplivom obtežb, ki delujejo v ravnini elementov, so izpostavljeni predvsem obtežbam, ki delujejo v ravnini, se npr. prenesejo s sosednjih delov konstrukcije. Lahko pa so izpostavljeni tudi obtežbam, ki delujejo izven ravnine.
1.2 Predpostavke
(1) Predpostavke standarda EN 1990 veljajo tudi za ta dokument.
(2) Ta dokument je namenjen za uporabo skupaj s standardi EN 1990, EN 1991 (vsi deli), EN 1993-1-1, EN 1995 1 1, EN 1998 1, EN 1999 1 1 in EN 12488.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 19100-3:2022
01-februar-2022
Projektiranje steklenih konstrukcij - 3. del: Projektiranje steklenih elementov pod
vplivom obtežb, ki delujejo v ravnini elementov in njihovih mehanskih spojev
Design of glass structures - Part 3: Design of in-plane loaded glass components and
their mechanical joints
Bemessung und Konstruktion von Tragwerken aus Glas - Teil 3: In Scheibenebene
belastete Bauteile und mechanische Verbindungen
Conception et calcul des structures en verre - Partie 3 : Conception et calcul des
composants en verre chargés dans leur plan et de leurs assemblages
Ta slovenski standard je istoveten z: CEN/TS 19100-3:2021
ICS:
91.080.99 Druge konstrukcije Other structures
SIST-TS CEN/TS 19100-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 19100-3:2022
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 19100-3:2022
CEN/TS 19100-3
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
November 2021
TECHNISCHE SPEZIFIKATION
ICS 91.080.99
English Version
Design of glass structures - Part 3: Design of in-plane
loaded glass components and their mechanical joints
Conception et calcul des structures en verre - Partie 3 : Bemessung und Konstruktion von Tragwerken aus
Conception et calcul des composants en verre chargés Glas - Teil 3: In Scheibenebene belastete Bauteile und
dans leur plan et de leurs assemblages mechanische Verbindungen
This Technical Specification (CEN/TS) was approved by CEN on 25 July 2021 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 19100-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 19100-3:2022
CEN/TS 19100-3:2021 (E)
Contents Page
European foreword . 4
0 Introduction . 5
1 Scope . 8
1.1 Scope of CEN/TS 19100-3 . 8
1.2 Assumptions . 8
2 Normative references . 8
3 Terms, definitions and symbols . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviations . 10
4 Basis of design . 12
4.1 Requirements . 12
4.2 Fracture Limit State (F
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.