EN 6059-309:2018

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 309: Fire resistance when fitted on a cable bundle

This European Standard specifies a method of testing the fire resistance of wire harnesses protected with fire resistant sleeve for aerospace application.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 309: Feuerbeständigkeit wenn um Kabelbündel installiert

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 309 : Résistance au feu une fois installée sur un toron des câbles

La présente Norme européenne spécifie une méthode d’essai pour vérifier la résistance au feu des harnais de câbles protégés par des gaines résistantes au feu pour application aérospatiale.

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 309. del: Požarna odpornost pri vgradnji kablov

Ta evropski standard določa metodo preskušanja požarne odpornosti žičnih snopov, zaščitenih z ognjevarno obojko, ki se uporabljajo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 21-Aug-2018
• Withdrawal Date: 27-Feb-2019
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Aug-2018
• Completion Date: 22-Aug-2018
• Ref Project: SIST EN 6059-309:2018 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 309: Fire resistance when fitted on a cable bundle

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2018
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO3RåDUQDRGSRUQRVWSULYJUDGQMLNDEORY
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 309: Fire resistance when fitted on a cable bundle
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 309: Feuerbeständigkeit wenn um Kabelbündel installiert
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 309 : Résistance au feu une fois installée sur un toron de câbles
Ta slovenski standard je istoveten z: EN 6059-309:2018
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 6059-309
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 13.220.40; 49.060
English Version
Aerospace series - Electrical cables, installation -
Protection sleeves - Test methods - Part 309: Fire
resistance when fitted on a cable bundle
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaines de protection - Méthodes d'essais - Partie 309 : Installation - Schutzschläuche - Prüfverfahren - Teil
Résistance au feu une fois installée sur un toron des 309: Feuerbeständigkeit wenn um Kabelbündel
câbles installiert
This European Standard was approved by CEN on 6 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-309:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Specimen composition . 4
5 Preparation of specimens . 5
6 Apparatus. 7
7 Method . 7
8 Procedure . 8
9 Requirements . 8
European foreword
This document (EN 6059-309:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall
be withdrawn at the latest by February 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
1 Scope
This European Standard specifies a method of testing the fire resistance of wire harnesses protected with
fire resistant sleeve for aerospace application.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3909, Aerospace series — Test fluids and test methods for electrical and optical components and
sub-assemblies
ISO 2685:1998, Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in
designated fire zones
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedi
...