iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1793-6:2018/prA1

(Amendment)

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 6: Produktspezifische Merkmale - In-situ-Werte der Luftschalldämmung in gerichteten Schallfeldern

Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 6 : Caractéristiques intrinsèques - Valeurs in situ d'isolation aux bruits aériens dans des conditions de champ acoustique direct

Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih lastnosti - 6. del: Bistvene karakteristike - Terenske vrednosti izolirnosti pred zvokom v zraku pri usmerjenem zvočnem polju

General Information

Status
Not Published
Publication Date
26-Jan-2022
ICS
17.140.30 - Noise emitted by means of transport
93.080.30 - Road equipment and installations
Technical Committee
CEN/TC 226 - Road equipment
Drafting Committee
CEN/TC 226/WG 6 - Noise reducing devices
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
26-Dec-2019
Due Date
25-Jun-2020
Completion Date
26-Dec-2019
Ref Project
SIST EN 1793-6:2018/oprA1:2019 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions

Relations

Merged Into
EN 1793-6:2018+A1:2021 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
Effective Date
30-Dec-2020
Amends
EN 1793-6:2018 - Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
Effective Date
22-May-2019

Buy Standard

EN 1793-6:2018/oprA1:2019EN 1793-6:2018/oprA1:2019
PreviousNext
Draft
EN 1793-6:2018/oprA1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1793-6:2018/oprA1:2019
01-december-2019
Protihrupne ovire za cestni promet - Preskusna metoda za ugotavljanje akustičnih
lastnosti - 6. del: Bistvene karakteristike - Terenske vrednosti izolirnosti pred
zvokom v zraku pri usmerjenem zvočnem polju
Road traffic noise reducing devices - Test method for determining the acoustic
performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation
under direct sound field conditions
Lärmschutzvorrichtungen an Straßen - Prüfverfahren zur Bestimmung der akustischen
Eigenschaften - Teil 6: Produktspezifische Merkmale - In-situ-Werte der
Luftschalldämmung in gerichteten Schallfeldern
Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination
de la performance acoustique - Partie 6 : Caractéristiques intrinsèques - Valeurs in situ
d'isolation aux bruits aériens dans des conditions de champ acoustique direct
Ta slovenski standard je istoveten z: EN 1793-6:2018/prA1
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 1793-6:2018/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1793-6:2018/oprA1:2019

---------------------- Page: 2 ----------------------
SIST EN 1793-6:2018/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 1793-6:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2019
ICS 17.140.30; 93.080.30
English Version

Road traffic noise reducing devices - Test method for
determining the acoustic performance - Part 6: Intrinsic
characteristics - In situ values of airborne sound insulation
under direct sound field conditions
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Prüfverfahren
Méthode d'essai pour la détermination de la zur Bestimmung der akustischen Eigenschaften - Teil
performance acoustique - Partie 6 : Caractéristiques 6: Produktspezifische Merkmale - In-situ-Werte der
intrinsèques - Valeurs in situ d'isolation aux bruits Luftschalldämmung in gerichteten Schallfeldern
aériens dans des conditions de champ acoustique
direct
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 226.

This draft amendment A1, if approved, will modify the European Standard EN 1793-6:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1793-6:2018/prA1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1793-6:2018/oprA1:2019
EN 1793-6:2018/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to C.3, Standard deviation of repeatability and reproducibility of the
sound insulation index . 4
2 Modification to D.5, Uncertainty (example) . 5

2

---------------------- Page: 4 ----------------------
SIST EN 1793-6:2018/oprA1:2019
EN 1793-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17812:2022(Main)
Determination of the acoustic properties of markings - The CPX measurement method
SIST-TS CEN/TS 17812:2022

This document outlines a method to measure the typical external noise emission produced when tyres of passenger car roll over a structured road marking. The result is a measure for the noise perceived in the surroundings of the road, hence not for interior noise in the car.
This method can be used for three purposes:
- determination of initial acoustic properties of a road marking, yielding a noise label for a given system;
- testing of the acoustic conformity of a particular marking to the noise label determined during the determination of initial acoustic properties;
- monitoring of the acoustic properties in the course of its lifetime.
The test result allows the road owner to make an assessment of the risk of nuisance when s/he considers a particular road marking system for application on a road in a noise sensitive area, e.g. built up areas. The method is also applicable to measurements on milled rumble strips.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-6:2018+A1:2021(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
SIST EN 1793-6:2018+A1:2021

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-5:2016/AC:2018(Corrigendum)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
SIST EN 1793-5:2016/AC:2018

TC - Modification to Formula (4) in all three language versions.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-2:2018(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
SIST EN 1793-2:2018

This document specifies the laboratory method for measuring the airborne sound insulation performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic performance of barriers that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed on roads in non-reverberant conditions.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-1:2017(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
SIST EN 1793-1:2017

This European Standard specifies the laboratory method for measuring the sound absorption performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise reducing devices to be installed on roads in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-5:2016(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
SIST EN 1793-5:2016

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of sound reflection from road noise reducing devices: the reflection index.
The test method is intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed along roads, to be measured either on typical installations alongside roads or on a relevant sample section;
- determination of the in situ intrinsic characteristics of sound reflection of noise reducing devices in actual use;
- comparison of design specifications with actual performance data after the completion of the construction work;
- verification of the long-term performance of noise reducing devices (with a repeated application of the method).
The test method is not intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results are expressed as a function of frequency, in one-third octave bands between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results shall be given in a restricted frequency range and the reasons of the restriction(s) shall be clearly reported.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-4:2015(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
SIST EN 1793-4:2015

This European Standard describes a test method for determining the intrinsic characteristics of sound diffraction of added devices installed on the top of traffic noise reducing devices. The test method prescribes measurements of the sound pressure level at several reference points near the top edge of a noise reducing device with and without the added device installed on its top. The effectiveness of the added device is calculated as the difference between the measured values with and without the added devices, correcting for any change in height (the method described gives the acoustic benefit over a simple barrier of the same height; however, in practice the added device can raise the height and this could provide additional screening depending on the source and receiver positions).
The test method is intended for the following applications:
•   preliminary qualification, outdoors or indoors, of added devices to be installed on noise reducing devices;
•   determination of sound diffraction index difference of added devices in actual use;
•   comparison of design specifications with actual performance data after the completion of the construction work;
•   verification of the long term performance of added devices (with a repeated application of the method);
•   interactive design process of new products, including the formulation of installation manuals.
The test method can be applied both in situ and on samples purposely built to be tested using the method described here.
Results are expressed as a function of frequency, in one-third octave bands between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results shall be given in the restricted frequency range and the reasons of the restriction(s) shall be clearly reported. A single-number rating is calculated from frequency data.
For indoors measurements see Annex A.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1793-3:1997(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum
SIST EN 1793-3:1999

This part of prEN 1793 gives a normalized traffic noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce traffic noise near roads.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1793-6(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
oSIST prEN 1793-6:2023

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 1793-1(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
oSIST prEN 1793-1:2023

This European Standard specifies the laboratory method for measuring the sound absorption performance of road traffic noise reducing devices in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise reducing devices to be installed on roads in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day