Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in erosion control works for preventing the migration of fine-graded material into layers of coarser material due to alternating hydraulic gradients, and the appropriate test methods to determine these characteristics.
This European Standard covers applications in coastal protection and bank revetment. This European Standard does not cover surface erosion, where the geotextile or geotextile-related product is located at the surface.
The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation, and reinforcement. The separation function will always occur in conjunction with filtration or reinforcement, and hence will not be specified alone.
This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318.
This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.
NOTE   Particular application cases may contain requirements regarding additional properties and – preferably standardised – test methods, if they are technically relevant.
This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.

Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Erosionsschutzanlagen (Küstenschutz, Deckwerksbau)

Diese Europäische Norm legt die wichtigsten Eigenschaften von Geotextilien und geotextilverwandten Produkten, die in Erosionsschutzanlagen verwendet werden, fest, um das Abwandern von feinkörnigen Materialien in Schichten von gröberen Materialien infolge von wechselnden hydraulischen Gefällen zu verhindern, sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Diese Europäische Norm behandelt Anwendungen in Küstenschutz und Deckwerksbau. Diese Europäische Norm behandelt jedoch nicht Oberflächenerosionsschutz, wobei das Geotextil oder geotextilverwandte Produkt sich an der Oberfläche befindet.
Bei ihrer vorgesehenen Anwendung werden diese Geotextilien und geotextilverwandten Produkte eine oder mehrere der folgenden Funktionen erfüllen: Filtern, Trennen und Bewehren. Die Trennfunktion wird immer in Verbindung mit Filtern oder Bewehren genutzt, folglich ist Trennen nie allein vorgegeben.
Diese Europäische Norm ist nicht auf geosynthetische Dichtungsbahnen anwendbar, wie in EN ISO 10318 festgelegt.
Diese Europäische Norm behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit des Produkts nach dieser Europäischen Norm und die werkseigene Produktionskontrolle.
ANMERKUNG Besondere Anwendungen können Anforderungen hinsichtlich zusätzlicher Eigenschaften und – vorzugsweise genormte – Prüfverfahren enthalten, wenn diese technisch relevant sind.
Diese Europäische Norm darf zur Festlegung von Bemessungswerten herangezogen werden, in dem die im Zusammenhang mit den in EN 1997-1 (Eurocode 7) angegebenen Definitionen, z. B. Sicherheitsbeiwerte, berücksichtigt werden. Für das Produkt sollte die vorgesehene Nutzungsdauer festgelegt werden, weil seine Funktion zeitlich befristet sein kann, als Einbauhilfe, oder dauerhaft, weil sie der Nutzungsdauer des Bauwerks entspricht.

Géotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans les ouvrages de lutte contre l’érosion (protection côtière et revêtement de berge)

La présente Norme européenne spécifie les caractéristiques pertinentes des géotextiles et produits apparentés utilisés dans les ouvrages de contrôle de l’érosion dans le but de prévenir la migration de matière à granulométrie fine dans des couches de matière plus grosse sous l’influence de gradients hydrauliques alternants. Cette norme spécifie aussi les méthodes d’essai appropriées pour déterminer ces caractéristiques.
L’application de ces géotextiles ou produits apparentés est de remplir au moins l’une des fonctions suivantes : séparation, renforcement et filtration. La fonction séparation étant toujours utilisée conjointement avec une autre fonction, celle-ci ne peut être spécifiée seule.
La présente norme européenne ne s’applique pas aux géomembranes et géosynthétiques bentonitiques tels que définis dans l'EN ISO 10318.
La présente norme européenne permet d’évaluer et de vérifier la constance des performances du produit à la présente norme européenne et les procédures de contrôle de la production en usine.
Des cas d’application particuliers ou des spécifications nationales peuvent contenir des exigences sur des propriétés supplémentaires et méthodes d’essais - si possible normalisées - si elles sont techniquement pertinentes.
La présente norme européenne peut être utilisée pour déduire les valeurs de calcul en prenant en compte les facteurs définis dans l’ ENV 1997-1( Eurocode 7), par exemple les facteurs de sécurité. Il convient de déterminer la durée de vie prévue du produit, puisque sa fonction peut être provisoire, pour des besoins de construction, ou permanente, pour la durée de vie de la structure.

Geotekstilije in geotekstilijam sorodni izdelki - Značilnosti, ki se zahtevajo pri nadzoru erozije (zaščita obale, zaščita z nasipom)

General Information

Status
Withdrawn
Publication Date
14-Jan-2014
Withdrawal Date
10-Feb-2015
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
11-Feb-2015

Relations

Buy Standard

Standard
EN 13253:2014
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Erosionsschutzanlagen (Küstenschutz und Deckwerksbau)Géotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans les ouvrages de lutte contre l’érosion (protection côtière et revêtement de berge)Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 13253:2014SIST EN 13253:2014en,fr,de01-marec-2014SIST EN 13253:2014SLOVENSKI
STANDARDSIST EN 13253:2001/A1:2005SIST EN 13253:20011DGRPHãþD



SIST EN 13253:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13253
January 2014 ICS 59.080.70 Supersedes EN 13253:2000English Version
Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les ouvrages de lutte contre l'érosion (protection côtière et revêtement de berge)
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Erosionsschutzanlagen (Küstenschutz, Deckwerksbau) This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13253:2014 ESIST EN 13253:2014



EN 13253:2014 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms, definitions and abbreviations .7 3.1 Terms and definitions .7 3.2 Abbreviations .8 4 Required characteristics and corresponding methods of test .8 4.1 General .8 4.2 Selection of the appropriate standard in a specific application .8 4.3 Characteristics relevant to specific conditions of use . 11 4.3.1 Stiffness at 2 %, 5 % and 10 % . 11 4.3.2 Tensile strength of seams and joints . 11 4.3.3 Static puncture .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.